Instrukcja obsługi SPT SD-300ML

SPT Osuszacz SD-300ML

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SPT SD-300ML (1 stron) w kategorii Osuszacz. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/1
CLEANING
1. Please POWER OFF the unit and unplug from the wall socket.
2. Clean the surfaces of the unit, air inlet, and water tank with a soft cloth.
WARNINGS
1. Please power down the unit when the unit is not in use.
2. DO NOT store the power source in a wet/damp area.
3. Always keep the unit in its upright position to avoid leaks
4. Check to make sure the air inlet/outlet are clear from blockage.
If this product is found to be faulty as a result of faulty materials or workmanship
within one year from date of purchase, it will be repaired free of charge.
This guarantee is subject to the following terms:
ŸSunpentown must be notified of the fault.
ŸProof of purchase must be presented to Sunpentown’s nominated
representative.
ŸThe warranty will be void if the product is modified, misused or repaired by an
unauthorized person.
ŸThe warranty after repair will not be extended beyond the original one-year
period.
ŸAll replacement parts will be new or reconditioned.
ŸParts, which are replaced, become the property of Sunpentown.
ŸThe warranty applies for the use of the product in the USA only.
What is NOT COVERED:
ŸWarranty does not include freight charges.
ŸDamage due to installation error, product abuse and/or misuse.
ŸIncidental or consequential damage caused by possible defects with this
product.
ŸLabor cost incurred for the installation and/or removal of a possible defective
unit.
ŸDamage to product caused by improper power supply voltage, accident, fire,
floods or acts of nature.
ŸFailure of product resulting from unauthorized modifications to the product.
ŸImproper installation or failure to perform the necessary maintenance.
ŸNormal wear and tear on parts or replacement of parts designed to be
replaced.
ŸDamage to personal property from use of product.
ŸReplacement or repair of household fuses, circuit breakers, wiring or plumbing.
This GUARANTEE is in addition to your Statutory Rights
SUNPENTOWN INTERNATIONAL INC.
14625 Clark Ave. City of Industry, CA 91745
Tel: 800-330-0388
service@sunpentown.com
FEATURES
SPECIFICATIONS
OPERATING INSTRUCTIONS
ON/OFF Button Air Outlet Indicator
Power Socket Air Inlet Water Tank
Hydraulic Cut-off Water Tank Cover Adaptor
AC Power Connector DC Power Connector
Model No.: SD-300ML
Size: 146*146*227mm
Input: DC9V 2.5A
Power: 23W
Volume: 600ml
Working Capacity: 300ml/D (30 , RH80 )℃ %
Applicable Ambient Temperature: 5-50℃
Coverage Area: 15＜ ㎡
This is a modern, light weight, and quiet dehumidifier that uses the Peltier effect to
keep your space cool and comfortable. It is ideal for rooms with poor ventilation
and dehumidifies at a rate of 300ml of water/day.
1. Hold ON/OFF button for 3 seconds to turn indicator on or off.
INDICATOR LIGHT
1. The water tank indicator light will turn RED when the 600ml capacity is reached.
The unit has a daily working capacity of 300ml.
2. When the indicator light turns RED, the unit will automatically shut off.
3. Please POWER OFF the unit before attempting to empty the water tank.
Be careful to not tilt the tank when it is full to avoid water spillage.
4. Slide the water tank cover off, empty the water, then slide the cover back on.
Reinsert the water tank into the unit to operate as instructed.
SD-300ML
INSTRUCTION MANUAL
Please read these instruction thoroughly and
keep it in a safe place for future reference
MINI DEHUMIDIFIER
Your Guarantee
SD-300ML
On/Off
Indicator Light (Water tank level)
NOTE: The unit will automatically stop dehumidifying when frost is detected on the
surface of the cooling plate and the defrost function will be activated. Once defrost is
complete, the unit will resume dehumidifying automatically.
2. Press the ON/OFF button to turn on the unit.
3. Press the ON/OFF button to turn off the unit.
1. Connect the power source to the unit and plug into a wall socket.

Specyfikacje produktu

Marka: SPT
Kategoria: Osuszacz
Model: SD-300ML

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SPT SD-300ML, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Osuszacz SPT

SPT

SPT SD-300ML Instrukcja

12 Września 2024

Instrukcje Osuszacz

Najnowsze instrukcje dla Osuszacz

MSW

MSW -DEH2000B Instrukcja

15 Października 2024
MSW

MSW -DEH1080A Instrukcja

15 Października 2024
MSW

MSW -DEH2000A Instrukcja

15 Października 2024
MSW

MSW -DEH2000C Instrukcja

15 Października 2024
MSW

MSW -DEH1080C Instrukcja

15 Października 2024
Midea

Midea MAD50C1BWT Instrukcja

13 Października 2024
Aktobis

Aktobis WDH-214US Instrukcja

9 Października 2024
Kogan

Kogan SmarterHome KASMDHM20FA Instrukcja

9 Października 2024
Cecotec

Cecotec BigDry 8000 Expert Connected Instrukcja

9 Października 2024
Einhell

Einhell LEF 10 M Instrukcja

9 Października 2024