Instrukcja obsługi SPT BD-0538

SPT Szafka klimatyczna na wino BD-0538

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SPT BD-0538 (20 stron) w kategorii Szafka klimatyczna na wino. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
MINI KEGERATOR
MODEL: BD-0538
INSTRUCTION MANUAL
Please read the instruction manual carefully before installing and operating the
beer cooler, and keep it for future reference.
INTRODUCTION
This is a household beer cooler, equipped with a CO2 cartridge pressure system to
keep beer fresh. It brings the beer to the best temperature for cold storage (0 to 4 C / º
32 to 39 F) within 19-21 hours. º
The beer cooler can keep the 5L Keg cool for an almost indenite period. We do,
however, suggest that you initially cool your beer keg for at least 12 hours in your
refrigerator before placing it into the beer cooler.
IMPORTANT SAFETY INSTRUCTION
We have provided many important safety messages in the instruction manual for the
beer cooler. Before use, please read and obey all safety rules and operating
instructions; and keep the instruction manual in a safe place for future reference.
Safety Instruction
Before use, check whether the power cord is well connected; if not, please do not
use and call service center.
If the supply cord is damaged, it must be replaced by the manufacturer, service
agent or a similarly qualied person in order to avoid a hazard.
Before use, check rating and conrm voltage. Dedicated circuit is recommended.
Check that the plug conforms with the socket; if not, please do not use and contact
a qualied electrician.
Do not connect or disconnect the electric plug when your hands are wet.
Place the beer cooler on a dry and horizontal surface.
To ensure proper ventilation for the beer cooler, make sure the beer cooler is at
least 5 inches away from walls/cabinets on all sides to allow proper ventilation.
Do not place near heat sources such as ovens, grills or direct sunlight.
Never cover the beer cooler when it is in operation.
The beer cooler must be installed in an area protected from the elements, such
wind, rain, water spray or drips.
Always turn the unit o and unplug from outlet before cleaning. Failure to do so can
result in electric shock or death.
Do not immerse the beer cooler or power plug in water or other liquid.
Do not use coarse cloth, abrasive stu to clear the beer cooler
Do not remove beer keg from the beer cooler if the keg is not empty.
Do not remove the CO2 cartridge until the CO2 cartridge is completely empty.
Do not use the CO2 cartridge if the room temperature is over 49ºC/120ºF. Failure to
do so can result in explosion or death.
Never allow children to operate, play with or crawl inside the beer cooler.
This unit is not intended for use by persons, including children, with reduced
physical, sensory or mental capabilities.
This unit is not intended to be used by children. Children should be supervised to
ensure that they do not play with this product.
HOW TO SELECT A KEG
Sealed 5L universal mini keg and Heineken mini keg applies only
Pay close attention to safety and storage messages about the keg / on the keg.
Check that the keg is neither damaged, nor out-of-date before purchasing.
Protect the top surface from being damaged. Otherwise it could be difficult to attach
the suction tube.
Keep the keg in a rather cold place for 12 hours, but not freezing (e.g. refrigerator),
until next use.
Never shake the keg before use
Never put the beer keg in direct sunlight
BEER KEG SEALANT
5-Liter beer kegs come with various plug sealants. You can use them with the beer
cooler, however, you should follow the information below for installation.
*The sealants with code No. 20 and 21 can be pierced simply by the cooler piercing
pin.
*The sealants with code No. 22 need to be removed o the marking ring from the
sealant and pierce the keg by cooler piercing pin. (Show as gure 1)
*The dierence between code No 23 and 24 is the safety clasp quantity. Pull up the
safety clasp carefully, turn around and take it out from the keg; replaced it by the
sealant (like code No 2 sealant) provided in the beer cooler, attach it to the beer keg,
and pierce it by cooler piercing pin. (Show as Figure 3).

Specyfikacje produktu

Marka: SPT
Kategoria: Szafka klimatyczna na wino
Model: BD-0538

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SPT BD-0538, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Szafka klimatyczna na wino SPT

SPT

SPT WC-1901US Instrukcja

17 Września 2024
SPT

SPT WC-2461H Instrukcja

14 Września 2024
SPT

SPT BF-314U Instrukcja

14 Września 2024
SPT

SPT BD-0538 Instrukcja

13 Września 2024

Instrukcje Szafka klimatyczna na wino

Najnowsze instrukcje dla Szafka klimatyczna na wino

Klarstein

Klarstein Shiraz 24 Instrukcja

13 Stycznia 2025
Klarstein

Klarstein Vinamour 46 Instrukcja

12 Stycznia 2025
Eta

Eta 9528 90010 Instrukcja

12 Stycznia 2025
Midea

Midea MRW29B4ASL Instrukcja

12 Stycznia 2025
Midea

Midea MRW14B2ABB Instrukcja

12 Stycznia 2025
Landmark

Landmark L3024UI2WPR-LH Instrukcja

10 Stycznia 2025
Landmark

Landmark L3015UI1WPR-RH Instrukcja

10 Stycznia 2025
Landmark

Landmark L3024UI1WPR-LH Instrukcja

10 Stycznia 2025
Edgestar

Edgestar CWR263DZ Instrukcja

10 Stycznia 2025
Edgestar

Edgestar CWR182SZ Instrukcja

10 Stycznia 2025