Instrukcja obsługi Spring USA SM-181C


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Spring USA SM-181C (4 stron) w kategorii piekarnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Operation
Manual
By
Models: SM-181C & SM-181C-T
Buffet
Induction
Cookware
The Evolution of Intelligent Design®
Spring USA®
127 Ambassador Drive
Suite 147
Naperville, IL 60540-4079
Phone: (1) 630-527-8600
Fax: (1) 630-527-8677
Email: springusa@springusa.com
Web: www.springusa.com
1
8
Before You Begin:
Read the following instructions in their entirety.
Use proper cookware. Your cookware must be induction-ready.
Check your ventilation. Your MAX Induction® Range must have the
proper ventilation in order to operate correctly. There must be at least 4”
of space available around your induction range.
Ensure that you have dedicated power to the installed location. Each
induction warmer will draw 15 Amps. One unit will operate from a single
20 Amp dedicated circuit.
Suitable Cookware
Stainless Steel Multi-Ply
Cookware Iron/Steel Frying Pan Cast Iron
Aluminum Cookware
with Induction Disc Iron/Steel Tray Enameled Ware
Copper, Bronze Or Aluminum
Cookware Glass Cookware
Ceramic Cookware
Without Special Coating
Pans with a Concave Bottom Bowl Shaped Cookware
Cookware with a
Diameter of Less
Than 4.5
Unsuitable Cookware
2
www.springusa.com
(1) 630-527-8600
The Evolution of Intelligent Design®
7
SM-181C-T Shown Below:
Safety Precautions:
Plug the power cord into a dedicated circuit. Nothing else should be Note:
plugged into this circuit. Each MAX Induction® Range must have its
own, sufficient power supply as outlined below. Once you have plugged
the unit in, it will beep, and an ‘EO’ code will appear in the display
window.
To Begin:
Turn the unit on. An ‘EO’ code will appear next in the digital window,
indicating the induction range is searching for cookware.
Turn the knob clockwise to turn the unit on. Your MAX Induction® range
will always start out in the “Cook” mode. “Cook” is the default mode.
Place suitable cookware within the circle on top of the MAX Induction®
Range.
Select either the “Cook” Mode or the “Temp” Mode.
In “Cook” mode, turn the dial clockwise. The LED will display cook
power levels of 1 thru 20.
In “Temp” mode, turn the dial clockwise. The LED will display
temperature levels from 110° to 400° fahrenheit. (43°C to 204°C).
Turn the knob clockwise to set the power level or temperature.
To shut the induction range off, turn the knob counter clockwise until you
hear the unit ‘click’ and turn off.
Actual range temperatures may vary due to a number of variables, such as
ambient temperature in the immediate surrounding area, content and
volume of food being heated or cooked, and whether or not you are using
a cover on the serving vessel.
Never attempt to service any part of your MAX Induction® Range on
your own. Contact our Service Department by calling (1) 630-527-8600.
Attempting to service your Induction Range on your own, or through an
unauthorized repair facility automatically voids your warranty. For
service forms, visit the Spring USA website.
For Limited Warranty Information, visit www.springusa.com
Note:
This equipment uses, generates, and can radiate radio frequency energy.
If not installed correctly, and used in accordance with the instructions,
may cause interference to radio communications. Users or guests with
Pacemakers should contact their health care professional for additional
information about its effects with electromagnetic fields of the induction
range.
NEMA 5-15
6’ Cord
1800 Watts 50-60 Hz110-120 Volts / 15
Amps
SM-181C &
SM-181C-T
Plug TypePeak PowerVoltage / AmpsModel #
Specifications:
Induction Range Error Codes:
Front Display Panel of the SM-181C-T MAX Induction® Range:
www.springusa.com
Review your dedicated power
requirements. Each range must
operate with the power required on
Page 4.
Range will not turn on. Range is
experiencing temporary voltage
overload or is not on its own,
dedicated circuit.
E3
Remove the cookware from the
range and let the range cool. Make
sure the vents are clear. Verify you
are using induction-ready
cookware. Once the range has
cooled, restart.
The range has overheated.
E2
Clear vents, let range cool down,
then restart. If error message
continues, your range needs to be
serviced.
Range has overheated due to
blocked ventilation and has shut
down the range.
E1
Place an induction ready pan on
the range.
Induction range does not sense
induction-ready cookware has
been placed on the glass surface
E0
SolutionCauseError
4 5
(1) 630-527-8600


Specyfikacje produktu

Marka: Spring USA
Kategoria: piekarnik
Model: SM-181C

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Spring USA SM-181C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje piekarnik Spring USA

Instrukcje piekarnik

Najnowsze instrukcje dla piekarnik