Instrukcja obsługi Speco Technologies ZIPL4D1


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Speco Technologies ZIPL4D1 (98 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/98
User Guide (Ver. 1.3)
Models: N4/8 NSL
4/8 Channel Network Video Recorder
About This Users Guide
Before operating the unit, please read this users guide thoroughly and retain it for future reference.
2
Cautions
Explanation of Graphical Symbols
WARNING
To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.
CAUTION
Changes or modifications not approved by the manufacture will void the warranty of the product.
Using an incompatible battery may increase the risk of fire or explosion.
Replace only with the same or equivalent type battery recommended by the manufacture.
Discard used batteries according to manufacturers instructions.
This symbol indicates the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
This symbol indicates the presence of dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric
shock, property damage, personal injury, or death.
3
These precautions must be followed for safety reasons
Warning
Do not use if the unit emits smoke.
Do not disassemble the unit.
Do not place any heavy or sharp objects on the unit.
Do not place on uneven surface.
Do not expose to shock or vibration.
Do not move the unit when the unit is powered on.
Do not block, and allow dust to accumulate in the air vents.
Do not restrict airflow of the unit; doing so can damage the unit.
Only qualified and experienced personnel should perform installation and
servicing.
Turn off the power of the L when connecting Cameras, Audio Cables. NS
The manufacturer is not responsible for any damage caused by improper use
of the product or failure to follow instructions for the product.
The manufacturer is not responsible for any problems caused by or resulting
from the user physically opening the L for examination or attempting to NS
repair the unit.
For NSL models with the PoE Switch, it is strongly recommended that the 48V
connector is inserted to the PoE Switch before the AC cable is attached to the
adaptor.


Specyfikacje produktu

Marka: Speco Technologies
Kategoria: Kamera monitorująca
Model: ZIPL4D1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Speco Technologies ZIPL4D1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kamera monitorująca Speco Technologies

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca