Instrukcja obsługi Speco Technologies VLD1A


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Speco Technologies VLD1A (10 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/10
User Manual
All- - One CameraIn
VLD1A
Version 0.11.
i
Table of Contents
1 General Introducon .................................................................1
1.1 Features ...........................................................................1
2 Device Framework .....................................................................2
3 Installaon .................................................................................3
ii
Welcome
Thank you for purchasing our All in One camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this
product!
Please keep this user manual for future reference!
Important Safeguards and Warnings
1 Electrical safety
All installaon and operaon here should conform to your local electrical safety
codes.
Please check if the power supply is correct before operang the device.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage)
and the Limited power source is rated DC 12V or AC24V in the IEC60950-1. (Power
supply requirement is subject to the device label).
Please install easy- -use device for power o before installing wiring, which is for to
emergent power o when necessary.
Please prevent the line cord from being trampled or pressed, especially the plug,
power socket and the juncon from the device.
Note: Do not connect these two power supplying sources to the device at the
same me; it may result in device damage!
We assume no liability or responsibility for all the res or electrical shock caused by
improper handling or installation.
We are not liable for any problems caused by unauthorized modicaon or
aempted repair.
2 Environment
Please don’t aim the device at strong light (such as lighng, sunlight and so on) to
focus; otherwise it may cause overexposure (It is not the device malfuncon), which
will aect the longevity of CCD or CMOS.
Please transport, use and store the device within the range of allowed humidity and
temperature.
Please don’t keep the device in a place which is wet, dusty, extremely hot, and
extremely cold and with strong electromagnec radiation or unstable lighng.


Specyfikacje produktu

Marka: Speco Technologies
Kategoria: Kamera monitorująca
Model: VLD1A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Speco Technologies VLD1A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kamera monitorująca Speco Technologies

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca