Instrukcja obsługi SoundTube Teatro TSB3.0

SoundTube soundbar Teatro TSB3.0

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SoundTube Teatro TSB3.0 (5 stron) w kategorii soundbar. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/5

Thank you for purchasing the Phase Technology TEATRO® TSB3.0 soundbar.

This high-denition LCR soundbar incorporates PhaseTech’s exclusive

Enhanced Voice Technology (EVT™) circuitry and Spatial Field Expanders

(SFE™) to provide outstanding dialogue clarity along with an open, wide sound

stage.

The TEATRO® TSB-3.0 soundbar speaker is a an ultra thin design made to

t seamlessly under a at panel TV. Both table top and wall mounting options

are included with the product. For on-wall applications, the mounting bracket

has adjustments for lining up and vertically leveling the speaker with the TV.

The soundbar cabinet also has threaded inserts for mounting the TSB3.0 to a

display wall bracket mechanism.

Note: please check with the display mount manufacturer for compatibility and

ensure the display mount will support a 12 pound soundbar.

Regardless of application, serious audiophile listening or home theater, we

recommend that you take the time to read this manual thoroughly before

connecting speakers to your amplier or receiver. In the highly unlikely event

that you should experience a problem with set-up or operation, please contact

one of our authorized dealers for assistance, or contact us directly.

Phase Technology Corporation

8005 W. 110th St., Suite 208

Overland Park, KS 66210

855.663.5600 (Domestic)

+1.913.663.5600 (International)

Fax: 913.663.3200

SAFETY INSTRUCTIONS 2

MOUNTING INSTRUCTIONS 3

WALL MOUNTING 3

TABLE TOP MOUNTING 4

CARING FOR YOUR SPEAKERS 5

MAINTENANCE AND SERVICE 5

TROUBLESHOOTING 5

WARRANTY 5

SPECIFICATIONS 5

CAUTION: BE VERY CAREFUL NOT TO DAMAGE THE MIDRANGE DOMES OR SFE [SPATIAL FIELD EXPANDERS™] DRIVERS LOCATED

ON THE SIDE OF THE CABINET WHILE HANDLING THE SOUNDBAR.

2. Mounting Bracket x2

1. TEATRO® TSB3.0

3. Mounting Pin x2

4. Leveling Screw x2

5. Table Top Mounting Feet x2

6. Table Top Mounting Feet Screws x4

7. Table Top Mounting Screws x2

8. Euroblock Connectors x3

[INCLUDED IN THE BOX]

OFF O N

EVT

TEATRO®

OWNER’S MANUAL: TSB3.0

1. Read Instructions - All the safety and operating instructions should be

read before the appliance is operated.

2. Retain Instructions - The safety and operating instructions should be

retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the operating

instructions should be adhered to.

4. Follow Instructions - All operating and other instructions should be

followed.

5. Water and Moisture - The appliance should not be used near water -

for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet

basement, or near a swimming pool, etc.

6. Carts and Stands - The appliance should be used only with a cart or

stand that is recommended by the manufacturer.

PORTABLE CART WARNING

7. Wall or Ceiling Mounting - The appliance should be mounted to a wall

or ceiling only as recommended by the manufacturer.

[SAFETY INSTRUCTIONS] 8. Ventilation - The appliance should be situated so that its location or

position does not interfere with its proper ventilation. For example, the

appliance should not be situated on a bed, sofa, rug, or similar surface

that may block the ventilation openings; or placed in a built-in installation,

such as a bookcase or cabinet that may impede the ow of air through the

ventilation openings.

9. Heat - The appliance should be situated away from heat sources such as

radiators, stoves, or other appliances that produce heat.

10. Power Source - The appliance should be connected to a power supply

only of the type described in the operating instructions or as marked on the

appliance.

11. Power Cord Protection - Power supply cords should be routed so

that they are not likely to be walked on or pinched by items placed up or

against them, paying particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the appliance.

12. Cleaning - The appliance should be cleaned only as recommended by

the manufacturer.

13. Nonuse Periods - The power cord of the appliance should be unplugged

from the outlet when left unused for a long period of time.

14. Object and Liquid Entry - Care should be taken so that neither objects

fall nor liquids spill into the inside of the appliance.

15. Damage Requiring Service - The application should be serviced by

qualied service personnel when:

a. the power supply cord or the plug has been damaged,

b. objects have fallen onto or liquid has been spilled into the appliance,

c. the appliance has been exposed to rain,

d. the appliance does not appear to operate normally or exhibits a marked

change in performance, or

e. the appliance has been dropped or the cabinet damaged.

16. Servicing - The user should not attempt to service the appliance

beyond those means described in the operating instructions. All other

servicing should be referred to qualied service personnel.

17. Grounding or Polarization - Precautions should be taken so that the

grounding or polarization means of an appliance is not defeated.

Explanation of Graphical Symbols

The lightning ash with arrowhead symbol, within an

equilateral triangle, is intended to alert you to the presence

of un-insulated “dangerous voltage: within the product’s

enclosure that may be off sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert you to the presence of important operating

and maintenance (servicing) instructions in the literature

accompanying the appliance.

APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR

USAGE

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

PLUG TO WIDE SLOT, INSERT FULLY.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE

LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE

CORRESPONDANTE DE LA PRESE ET POUSSER JUSQU AU FOND.

CAUTION: To reduce the risk of electric shock, do not remove cover

(or back). No user-serviceable parts inside. Refer servicing to qualied

service personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

“Speakers for your Life” is a trademark of MSE Audio, Overland Park, Kansas USA. Phase Technology is part of MSE Audio

®. www.phasetech.com.

[MOUNTING INSTRUCTIONS]

When selecting the speaker mounting location, it is prudent to take a few

extra minutes to carefully inspect and measure the wall where you intend to

mount the TSB3.0 speaker and your at panel display. An inspection of the

room, or rooms, that back up to the wall you have selected for mounting the

TSB3.0 can often alert you to potential obstacles. An electronic stud-nder

is a useful tool to assist you in selecting the speaker placement, but be

cautious as they often give false readings. For example, if the wall you want

to mount to happens to be the common wall for a bathroom or kitchen,

there is a good chance you will encounter water or sewer pipes in the wall

that will not be detected by a stud-nder. It is recommended, that wherever

possible, you try to fasten these mounting brackets to a vertical stud with

the appropriate wood screws. If it is not possible to mount the brackets over

the studs then it is recommended that the appropriate hollow wall anchors

or toggle bolts be used to mount the TSB3.0.

Note: In order for the Spatial Field Expanders to operate correctly, the sides

of the soundbar must not be obstructed.

STEP 1

Determine that the desired mounting location is safe and clear of any

physical obstructions that might hinder the proper installation of the

speakers. If the at panel monitor is already installed on the wall you can

use it as a guide for the installation of the speaker. For the best appearance,

it is recommended that the speaker be installed symmetrically beneath the

monitor. The Soundbar’s response characteristics will be best if you mount

it within a few inches of the at panel display.

Special consideration must be taken to run three (3) sets of speaker leads

to the TSB3.0 speakers. One pair each will be connected to the left and

right channel on your amplier and the other pair will be used for the center

channel. Be certain that you can get the speaker wire to the locations

where you plan to mount the speaker systems.

Please note that the TSB3.0 speakers are designed to mount very close to

the wall and the brackets only allow about .5” of clearance so be certain to

make allowances for this with your speaker connectors and wire clearances.

We suggest that you use a minimum of AWG 16 wire. Pre-run your speaker

wire to the determined locations and be certain to leave about two feet

of extra wire for the nal speaker installation. If the at panel monitor is

not yet mounted to the wall, mount the display rst before mounting the

speakers.

sure this mark is also 2.5” below the TV. Repeat this process on the right

side of the display – making sure that this mark is level with the mark on

the left side. This will create two marks that are 16” apart and 2.5” below

the bottom of your display . You have now identied the location (Figure 1)

for the two wall brackets for the TSB3.0 speaker.

Using a 1/16” drill bit, drill a pilot hole at each of your two marks above.

Place one of the wall brackets on the wall and align the pilot hole with the

bottom slot on the bracket and drill a second pilot hole in the center of the

upper slot on the bracket . This hole will be 7/8” above the rst (Figure 2)

pilot hole. Repeat this process for the bracket on the other side. These pilot

holes will let you know if your mounting bracket location is over a wall stud

or not. If it is over a stud then that bracket can be installed with a suitable

screw (for mounting on sheetrock walls, we recommend at least a #10 x

1.5” pan head screw and a at washer between the screw and the bracket).

If the location for the bracket is not over a wall stud, then suitable drywall

anchors that can support 15 lbs each must be used.

STEP 2.1 – WALL MOUNTING

For the best audio experience, the TSB3.0 speaker should be centrally

aligned and mounted directly below the TV display. Each speaker comes

with two identical Mounting Brackets and these should be mounted to the

wall 16 inches apart and centrally located under the TV.

First, locate the center line of your TV display and make a light pencil mark

on the wall that is 2.5” below the bottom of your display. Next, measure to

the left of this mark exactly 8” and make another mark at that point. Make

[FIGURE 2]

Following the guidelines above, mount the two brackets to the wall. Once

they are installed check that the center distance between the vertical

mounting slots on the two brackets is exactly 16”. Adjust the brackets with

the horizontal slots until on they are 16” apart.

Locate the two holes on the back of the speaker that are 8” apart from the

center hole and install the two Mounting Pins in these holes (Figure 3).

Your TSB3.0 speaker is now ready to be mounted to the wall.

Connect the Left Center and Right inputs from your surround receiver

to the Male Euroblock connectors included with the speaker. Be careful

to observe proper polarity; + (red) on your receiver to + on the speaker

Euroblock connector. Connect the appropriate Euroblock connector to

the left/center/right inputs on the back of the speaker before placing your

speaker on the Mounting Brackets.

[FIGURE 1]

16”

2.5”

Flat Panel Display

[FIGURE 3]

Specyfikacje produktu

Marka:	SoundTube
Kategoria:	soundbar
Model:	Teatro TSB3.0

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SoundTube Teatro TSB3.0, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje soundbar SoundTube

SoundTube Teatro TCE1.5 Instrukcja

10 Grudnia 2024

SoundTube Teatro TSB3.0 Instrukcja

10 Grudnia 2024

SoundTube Teatro TFS1.0 Instrukcja

10 Grudnia 2024

SoundTube IPD-TSB2.0 Instrukcja

10 Grudnia 2024

Instrukcje soundbar

Najnowsze instrukcje dla soundbar

Boss SB18BRGB Instrukcja

11 Grudnia 2024

JBL PSB-2 Instrukcja

9 Grudnia 2024

Nedis SPSB420BK Instrukcja

9 Grudnia 2024

Muse M-1680 SBT Instrukcja

9 Grudnia 2024

Dell AX510 Instrukcja

8 Grudnia 2024

Klipsch Cinema 700 Instrukcja

8 Grudnia 2024

Trust Thorne GXT 619 Instrukcja

4 Grudnia 2024

Onkyo SBT-A500 Instrukcja

15 Października 2024

Insignia NS-HTSB20S Instrukcja

15 Października 2024

Bose Smart Soundbar Instrukcja

9 Października 2024