Instrukcja obsługi Soundskins SSK-STRIP


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Soundskins SSK-STRIP (1 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
Foam Tape
installation
instructions
Alcohol based cleaner
& microfiber towel
Sharp blade or
scissors Roller
R
Prepping the Surface
Start by getting all metal surfaces clean from dust, oil, wax and moisture.
We recommend using a microfiber cloth and an alcohol based cleaning
solution such as denatured alcohol or Invisible Glass. If you have rust, it may
require a bit more attention to ensure the material will stick well. Once all the
surfaces have been prepped and air dried, you can start applying the
material.
Installation
Remove a small section of the backing paper from the foam tape and tack
it into place of the area you would like to cover.
Then, cut the strip to your required size and remove the remainder of the
backing paper.
Last, press or wrap the adhesive side of the foam tape firmly into place, and
repeat this process as needed.
If you have any questions, don’t hesitate to contact us using the information
provided below.
SoundSkins Global USA
(877)211-5597
usa@SoundSkinsGlobal.com
www.SoundSkinsGlobal.com ®2024 SoundSkins Global, All Rights Reserved
@soundskinsglobal
All required tools


Specyfikacje produktu

Marka: Soundskins
Kategoria: Nie skategoryzowane
Model: SSK-STRIP

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Soundskins SSK-STRIP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane Soundskins

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane