Instrukcja obsługi Soundskins SSK-SEK


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Soundskins SSK-SEK (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
• Panel/trim tool
• Roller
• Gloves
• Screw driver
• Microfiber cloth
• Acetone or cleaning solution
• Razor blade
Tools needed for installation:
Prepping the Surface:
Remove door panel, speaker, and vapor barrier; unplug cables.
Clean metal surfaces (use microfiber cloth and Acetone).
Address any rust for better adhesion.
Let surfaces air dry.
Speaker Kit Installation:
Center material over speaker hole.
Remove backing; apply from top down, use roller to remove air pockets.
If air is trapped, use razor/needle to release it.
Press down material around speaker hole; cut along edge with blade.
Apply acoustic foam inside speaker hole.
Repeat for all speakers.
Speaker Rings Installation:
Reinstall speaker; clean speaker plate trim.
Apply foam strip around speaker face; remove backing gradually.
Trim excess foam; connect strip ends.
It should look like the image on bottom right.*
Reinstall door panel.
*
SPEAKER Enhancer
Bundle installation


Specyfikacje produktu

Marka: Soundskins
Kategoria: Niesklasyfikowane
Model: SSK-SEK

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Soundskins SSK-SEK, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Soundskins

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane