Instrukcja obsługi Sony STR-DE485E

Sony odbiornik STR-DE485E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sony STR-DE485E (56 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/56
FM Stereo
FM-AM Receiver
4-238-376- (2)11
STR-DE585
STR-DE485E
STR-DE485
Owner’s Record
The model and serial numbers are located on the rear panel. Record the serial number
in the space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No. STR-DE585/DE485E/DE485 Serial No.
© 2002 Sony Corporation
GB
Operating Instructions
2GB
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To prevent fire, do not cover the ventilation of the
apparatus with newspapers, table-cloths, curtains, etc.
And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
Don’t throw away the battery with
general house waste, dispose of it
correctly as chemical waste.
Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
For customers in the United States
This symbol is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
WARNING
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
You are cautioned that any changes or modification
not expressly approved in this manual could void
your authority to operate this equipment.
Note to CATV system installer:
This reminder is provided to call CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
For customers in Canada
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT USE
THIS POLARIZED AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
E SNERGY TAR® is a U.S. registered
mark.
As an
E
NERGY
S
TAR
®
partner, Sony
Corporation has determined that this
product meets the
E
NERGY
S
TAR
®
guidelines for energy efficiency.
This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
** “DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
3GB
Table of Contents
List of Button Locations and
Reference Pages
Main unit ............................................... 5
Hooking Up the Components
Required cords ....................................... 6
Antenna hookups ................................... 7
Audio component hookups .................... 8
Video component hookups .................... 9
Digital component hookups................. 10
Multi channel input hookups1) ............. 11
Other hookups ..................................... 12
Hooking Up and Setting Up
the Speaker System
Speaker system hookups ..................... 13
Performing initial setup operations ..... 15
Multi channel surround setup .............. 15
Checking the connections .................... 20
Basic Operations
Selecting the component ..................... 21
Changing the display ........................... 22
Enjoying Surround Sound
Automatically decoding the input
audio signal ................................... 23
Selecting a sound field ........................ 23
Using only the front speakers
(2 Channel Stereo) ......................... 25
Enjoying stereo sound in multi channel
(Dolby Pro Logic II) ...................... 25
Understanding the multi channel
surround displays .......................... 26
Customizing sound fields .................... 27
Receiving Broadcasts
Storing FM stations automatically
(AUTOBETICAL)2) ...................... 30
Direct tuning ........................................ 30
Automatic tuning ................................. 31
Preset tuning ........................................ 31
Using the Radio Data System (RDS)
2)
.... 33
Other Operations
Naming preset stations and program
sources ........................................... 35
Recording ............................................ 35
Using the Sleep Timer ......................... 36
Adjustments using the SET UP
button ............................................ 36
Operations Using the Remote
RM-PP5063)
Before you use your remote ................ 38
Remote button description ................... 38
Selecting the mode of the remote ........ 41
Programming the remote ..................... 42
Operations Using the Remote
RM-U3064)
Before you use your remote ................ 45
Remote button description ................... 45
Changing the factory setting of a
function button .............................. 48
Additional Information
Precautions .......................................... 49
Troubleshooting ................................... 49
Specifications ...................................... 52
Tables of settings using SURR, LEVEL,
SET UP, BASS and TREBLE
buttons ........................................... 54
Adjustable parameters for each
sound field ..................................... 55
1) STR-DE585 and STR-DE485 only
2) Models of area code CEL, CEK only.
3) For STR-DE585 area code CA only.
4) Except for STR-DE585 area code CA.
GB

Specyfikacje produktu

Marka: Sony
Kategoria: odbiornik
Model: STR-DE485E

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sony STR-DE485E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Sony

Sony

Sony STR-DE495 Instrukcja

4 Października 2024
Sony

Sony STR-DN1020 Instrukcja

2 Października 2024
Sony

Sony STR-DH520 Instrukcja

30 Września 2024
Sony

Sony STR-DE695 Instrukcja

28 Września 2024
Sony

Sony STR-DE485E Instrukcja

28 Września 2024
Sony

Sony ST-SB520 Instrukcja

26 Września 2024
Sony

Sony STR-DB870 Instrukcja

20 Września 2024
Sony

Sony URX-S03D Instrukcja

12 Września 2024
Sony

Sony ST-S222ES Instrukcja

3 Września 2024
Sony

Sony URX-P40 Instrukcja

27 Sierpnia 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024