Instrukcja obsługi Sony MKS-R3210

Sony nieskategoryzowany MKS-R3210

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sony MKS-R3210 (38 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/38
32 BUTTON REMOTE CONTROL
PANEL
MKS-R3210
16 BUTTON LCD REMOTE
CONTROL PANEL
MKS-R1620
UNIVERSAL 16 LCD REMOTE
CONTROL PANEL
MKS-R1630
Operating Instructions
4-733-749-14 (1)
© 2017 Sony Corporation
2
Table of Contents
Overview.................................................................... 3
Features ..........................................................................3
Button Function Settings .................................................3
System Connection Example ..........................................4
Locations and Functions of Parts........................... 5
Front Panel ......................................................................5
Rear Panel ......................................................................7
Status Display Window (MKS-R1630) ............................8
Preparations............................................................ 13
Notes on Installation ......................................................13
Setting Up the Unit ........................................................13
Connections with System Controllers ...........................13
Key Label Indications ....................................................13
Configuring Using the Buttons ......................................15
Operations............................................................... 16
Configuring Using a System Controller and Web
Menu ..........................................................................16
Pinned Buttons, Selection Buttons, and Function
Buttons .......................................................................16
Switching Between Source Selection Mode and
Destination Selection Mode .......................................17
Switching Crosspoints ...................................................17
Assigning a Source/Destination to a Selection
Button (Assign) ..........................................................18
Switching a Different Source for Each Level
(Breakaway) ...............................................................19
Switching Multiple Crosspoints Simultaneously
(Salvo) .......................................................................21
Take Mode ....................................................................21
Pages and Page Groups ...............................................22
Switching and Monitoring Two Sources (Chop) ............22
Preventing Source Switching for Destinations
(Protect) .....................................................................23
Preventing Accidental Operation (Lock) ........................23
Monitoring Destinations .................................................23
Level Control .................................................................24
Retrace Function ...........................................................24
Linkage Function ...........................................................24
Web Menu................................................................ 25
Displaying the Web Menu .............................................25
Screen Configuration ....................................................25
Panel Table Page ..........................................................26
Source Reentry Lists Page ...........................................26
Salvo Table Page ..........................................................27
Available Src/Dest Page ...............................................27
Control Area Page .........................................................27
Alias Name Lists Page ..................................................28
Default Controls Page ...................................................28
Operation Settings Page ...............................................28
Display Settings Page ...................................................29
Retrace Settings Page ..................................................30
Linkage Settings Page ..................................................31
Page Group Settings Page ...........................................31
Network Settings Page ..................................................32
Remote Maintenance Page ...........................................32
Time Settings Page .......................................................33
System Page .................................................................33
CSV ...............................................................................34
Usage Precautions ................................................. 35
Error/Warning Messages ....................................... 36
Specifications ......................................................... 38
3
Overview
The MKS-R3210/R1620/R1630 is a remote control panel that
connects to a PWS-100NM1/110NM1 running IP Live
System Manager (system controller) to switch the routing of
video signals and audio signals. You can use the selection
buttons on this unit to switch the source/destination of signals
of Networked Media Interface devices or to switch the
source/destination of a routing switcher.
Features
Large buttons that display functions in different
colors
Employs large selection buttons on the front panel designed
for easy operation. Selection buttons light up green or amber,
dimly or brightly to show their functions and the currently
selected source and destination.
You can set the button color and brightness in the web menu
to suit the operating environment to make the buttons more
visible.
Buttons to select sources and destinations
All selection buttons on the front panel can be used as source
selection buttons or destination selection buttons according
to settings in the web menu. The current setting can be easily
discerned by the color of the button when lit.
Display of switch names using key labels
The source or destination name, set using the web menu, can
be shown on a key label on each button. Key labels are
interchangeable.
Controllable up to 128 levels 1)
Up to 128-level (128 signals) control is supported using
settings configured using the web menu.
1) Levels
To handle different kinds of signals simultaneously, it is necessary
to use a routing switcher for each type of signal. For example, a
recording to be made on a VTR requires the use of five signal
levels: video, audio 1, audio 2, timecode and remote control
signals. These are collectively referred to as levels.
Different sources for each level are selectable
(breakaway function)
You can select and display different sources for each level
using the breakaway function.
Monitor function to watch the selection status or
other outputs
When a destination you wish to monitor is set as a monitor
destination, the source automatically switches to the same
source as the monitor destination when the monitor function
is set to ON.
Switching between two sources alternately (chop
function)
The chop function switches between two sources alternately
at a specified interval automatically.
Switching of multiple crosspoints using a single
operation (salvo function)
When multiple crosspoints have been selected and a salvo is
defined beforehand using the web menu, all the crosspoints
set for the salvo can be switched by pressing one button.
Self-diagnostics function
The unit automatically performs self-diagnostics, such as
communications status checks. The diagnostics results
appear in the display window.
System redundancy support
The unit features dual power supplies and networks to
support system redundancy.
Display window for each selection button
(MKS-R1620/R1630)
On the MKS-R1620, a display window is assigned to each
selection button. On the MKS-R1630, the selection buttons
themselves are display windows. Each selection button has a
2-line, 6-character (3 full-width character) display window.
The source name is displayed in the display window of source
selection buttons, and the destination name is displayed in
the display window of destination selection buttons.
Status display function (MKS-R3210/R1620)
The currently selected source name, destination name, and
any error messages are displayed.
Status display function using a 2-inch color LCD
(MKS-R1630)
A large LCD display shows source names, destination
names, errors, levels, and other information.
Button Function Settings
The selection buttons can be used as either source selection
buttons or destination selection buttons. You can define the
function of each button using the web menu. The settings are
made for each button. A source selection button can select
the input signal assigned to a button upon your merely
pressing that button.

Specyfikacje produktu

Marka: Sony
Kategoria: nieskategoryzowany
Model: MKS-R3210

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sony MKS-R3210, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Sony

Sony

Sony LBN-H1 Instrukcja

16 Września 2024
Sony

Sony REON POCKET RNPK-5 Instrukcja

27 Sierpnia 2024
Sony

Sony PK-F60LA2 Instrukcja

27 Sierpnia 2024
Sony

Sony DVF-L700 Instrukcja

29 Maja 2024
Sony

Sony DVF-L350 Instrukcja

29 Maja 2024
Sony

Sony DVF-EL100 Instrukcja

29 Maja 2024
Sony

Sony DWR-S02DN Instrukcja

29 Maja 2024
Sony

Sony BKS-R6010 Instrukcja

29 Maja 2024
Sony

Sony BKS-R1617 Instrukcja

29 Maja 2024
Sony

Sony BKPF-L753A Instrukcja

29 Maja 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024