Instrukcja obsługi Sony DRN-XM01H2

Sony Tuner audio DRN-XM01H2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sony DRN-XM01H2 (2 stron) w kategorii Tuner audio. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

For customers in the USA

Please register this product on line at http://www.sony.com/

productregistration.

Proper registration will enable us to send you periodic mailings about

new products, services, and other important announcements.

Registering your product will also allow us to contact you in the

unlikely event that the product needs adjustment or modiﬁcation.

Thank you.

WARNING

To prevent ﬁre or shock hazard, do not expose

the unit to rain or moisture.

To avoid electrical shock, do not open the

cabinet. Refer servicing to qualiﬁed personnel

only.

You are cautioned that any changes or modiﬁcations not expressly

approved in this manual could void your authority to operate this

equipment.

INFORMATION

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment oﬀ and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit diﬀerent from that to

which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Caution

• Do not operate the unit in a way that might divert your attention from

driving safely. As a driver, you alone are responsible for safely

operating your vehicle in accordance with traﬃc safety laws at all times.

• Do not install the unit where it may obstruct your view through the

windshield or your view of your vehicle’s indicator displays.

• Do not install the unit where it may hinder the function of safety

devices such as an air-bag. Doing so may prevent the air-bag from

functioning properly in the event of an accident.

• The installation and use suggestions contained in this manual are

subject to any restrictions or limitations that may be imposed by

applicable law— purchaser should check applicable law for any

restrictions or limitations before installing and/or operating this

product.

• Failure to follow these safety instructions and warnings may result in a

serious accident.

Before You Begin

Thank you for choosing the Sony digital audio receiver!

It will give you many hours of reliable service and listening pleasure.

Before operating the receiver, please read these instructions thoroughly

and retain them for future reference.

If you have any questions about this product, you may call:

Sony Direct Response Center 1-(800)-222-7669 or write to:

Sony Direct Response Center 12451 Gateway Blvd. Fort Myers, FL 33913

Declaration of Conformity

Trade Name: SONY

Model: DRN-XM01MK2

Responsible Party: Sony Electronics Inc.

Address: 680 Kinderkamack Road, Oradell, NJ 07649 USA

Telephone Number: 201-930-6972

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

If you have any questions or problem concerning this product, consult

your nearest Sony dealer: 1-(866)-473-7669.

If you have any questions or problem concerning the XM Satellite radio

service including the broadcast, consult XM.

The Radio ID is required when consulting XM. It is located on the

bottom of the main unit, and you can also check it in the display of this

unit (see “Displaying the Radio ID”).

Introducing XM™ Satellite Radio

There’s a world beyond AM and FM. XM Satellite Radio. Up to 100

channels. Coast-to-Coast Coverage. Digital quality sound. With many

commercial-free music channels. Plus, the best sports, comedy, talk, news

and entertainment, including USA Today, Discovery Radio, NASCAR,

Sesame Workshop, CNNfn and CNN/SI. Questions? Visit

www.xmradio.com. The future is waiting.

How to Subscribe

Listeners can subscribe by visiting XM on the Web at www.xmradio.com

or by calling XM’s Listener Care at (800)852-9696. Customers should have

their Radio ID ready; it is located on the bottom of the main unit, and you

can also check it in the display of this unit (see “Displaying the Radio

ID”).

Technology. It is prohibited to copy, decompile, disassemble, reverse

engineer or manipulate any technology incorporated in receivers

compatible with the XM Satellite Radio system. Furthermore, the AMBE

voice compression software included in this product is protected by

intellectual property rights including patent rights, copyrights, and trade

secrets of Digital Voice Systems, Inc. The user of this or any other

software contained in an XM Radio is explicitly prohibited from

attempting to copy, decompile, reverse engineer, or disassemble the

object code, or in any other way convert the object code into human-

readable form. The software is licensed solely for use within this product.

Features

• This unit is exclusively for the XM Satellite radio.

• Display function for a variety of text information about the tuned-in

channel.

• Memo function enables the unit to store the text information for up to

10 memories.

• Preset function for up to 20 channels.

• Direct selection of the desired channel with the remote commander.

• Transportable type receiver, which can be attached and removed from

the cradle easily.

• Jog roller and remote commander for easy operation.

• Category Scroll function using a speciﬁed category for easy channel

selection.

• Auto Power Down function enables the unit to automatically turn

power oﬀ.

Precautions

For customers who use this unit in a car

• When you turn oﬀ the ignition switch of your car, be sure to turn oﬀ the

power of the unit by pressing the POWER button on the main unit or

remote commander. Otherwise the unit may drain car battery.

• When you get out of your car, remove the main unit from the cradle

and take it with you to prevent it from being stolen.

3-245-382- (1)11

Operating Instructions

Before operating the unit, install the unit correctly by referring

to the Installation Guide.

You need to subscribe for XM™ Satellite Radio Service to listen

to the radio broadcast.

OWNER’S RECORD

The model number is located on the bottom and serial number

also on the bottom. Record the serial number in the space

provide below. Refer to these numbers whenever you call upon

your Sony dealer regarding this product.

Model No.

Serial No.

Radio ID

Digital Audio

Receiver

DRN-XM01C2

DRN-XM01R2

DRN-XM01H2

Installing the Main Unit in the

Cradle

Insert the main unit completely into the cradle until the main unit is

locked in the cradle.

To remove the main unit from the cradle

While pressing the two cradle release buttons on the left and right sides of

the main unit, pull out the main unit from the cradle.

Replacing the Lithium Battery

into the Remote Commander

Replace the battery when the buttons on the remote commander do not

work. Remove the old battery and insert a new one.

1 Insert a long and thin object into the hole, then pull out the

lithium battery holder.

2 Replace the lithium battery with the positive (+) side facing

up.

3 Insert the battery holder into the remote commander until it

clicks.

Battery life (Approx.)

Sony lithium battery CR2025 1 year

Notes on lithium battery

• Keep the lithium battery out of reach of children. Should the battery be

swallowed, immediately consult a doctor.

• Wipe the battery with a dry cloth to assure good contact.

• Be sure to install the battery in the correct polarity position.

• Do not hold the battery with metallic tweezers, as doing so may cause a

short-circuit.

• Do not break up the battery or throw it into a ﬁre, which might cause it

to explode.

• Carefully dispose of the used battery.

Note

When the unit is not to be used for a long period of time, remove the

battery to avoid damage from battery leakage and corrosion.

Icon List

The following icons appear in the display.

XM1

XM4

indicates the Channel Number, and the Band Number

for the Preset Channels in number 1 to 4.

CHAN

indicates the Channel Name.

NAME

indicates the Artist Name/Feature.

TITLE

indicates the Song/Program Title.

INFO

indicates the Additional Information.

TIME

indicates Time and Date.

CAT

indicates the Category.

indicates the Menu display.

Speciﬁcations

Main unit

Time display: 12-hour system

Auto power down function: OFF/60 min/120 min/180 min

Output: LINE OUT jack (ø 3.5 mm stereo minijack)

Power requirements: 6 V DC, DC IN 6V jack

Dimensions:

Incl. projecting parts and controls:

Approx. 105 120 mm (w/h/d)× 40 ×

(Approx. 4 1/4 × 1 5/8 × 4 3/4 inches)

When the main unit is installed in the car cradle with the car stand:

Approx. 105 128 mm (w/h/d) (Approx. 4 × 68 ×1/4 × 2 3/4 × 5 1/8 inches)

When the main unit is installed in the home cradle with the home stand:

Approx. 105 128 mm (w/h/d) (Approx. 4 × 55 ×1/4 × 2 1/4 × 5 1/8 inches)

Not incl. projecting parts and controls:

Approx. 102 120 mm (w/h/d)× 38 ×

(Approx. 4 1/8 × 1 1/2 × 4 3/4 inches)

When the main unit is installed in the car cradle with the car stand:

Approx. 102 128 mm (w/h/d)× 66 ×

(Approx. 4 1/8 × 2 5/8 × 5 1/8 inches)

When the main unit is installed in the home cradle with the home stand:

Approx. 102 128 mm (w/h/d)× 53 ×

(Approx. 4 1/8 × 2 1/8 × 5 1/8 inches)

Mass: Approx. 220 g (7.8 oz)

When the main unit is installed in the car cradle with the car stand:

Approx. 380 g (13.4 oz)

When the main unit is installed in the home cradle with the home stand:

Approx. 300 g (10.6 oz)

Remote commander

Power requirements: 3V DC, one CR2025 lithium battery

Dimensions: Approx. 47 × × 125 9 mm (w/h/d)

(Approx. 1 7/

8 × 5 ×3/8 inches) incl. projecting parts and controls

Mass: Approx. 27 g (0.95 oz) incl. lithium battery

XM antenna (supplied only for DRN-XM01H2)

Frequency:2 332.5 - 2 345.0 MHz

Input voltage: 4.7 V DC (3.6 - 5.5 V allowable)

Current draw:100 mA max.

Cable length: Approx. 7 m (23 ft)

Dimensions: Approx. 55 × × 31 69 mm (w/h/d)

(Approx. 2 1/

4 × 1 1/

4 × 2 3/4 inches)

Mass: Approx. 250 g (8.8 oz)

Design and speciﬁcations are subject to change without notice.

Main unit

Cradle

Cradle release

button

Troubleshooting

Should any problem persist after you have made the following checks,

consult your nearest Sony dealer. Consult XM if you have any questions

or problem concerning the broadcast service of the XM Satellite radio.

The unit cannot receive channels at all.

• When “CHECK ANTENNA” appears in the display

The supplied antenna is not connected to this unit. Check the

connection of the antenna cord, then turn the power on again.

• When “NO SIGNAL” appears in the display

The receiving condition is not good. Move to the place where the

condition is good.

The unit cannot receive a particular channel.

• You need to subscribe for XM.

• When “UPDATING” appears in the display

You have not subscribed for XM or the channel is not authorized. You

need to subscribe for XM.

• When “OFF AIR” appears in the display

The channel is not broadcasted now.

• When “CH---” appears in the display

The channel to be tuned-in is void due to the change by the broadcast

service, a bad receiving condition, or a wrong selection of the channel

that is not exist.

You cannot select a desired channel.

• In Category Scroll mode, you can select only the channels that

correspond to the Channel Category you selected in the menu. Select a

diﬀerent Channel Category or change to the Channel Scroll mode. See

“Using the Category Scrolls”.

“SYSTEM ERROR” appears in the display and you cannot operate the

unit.

• A system error occurs. Consult the Sony Direct Response Center.

“--------” is displayed for the text information about Artist Name/

Feature, Song/Program Title, Additional Information, or time

information.

• There is no text information or time information in the channel. This is

not an error.

• The text information may not be displayed depending on the unit

condition, for example, right after the unit has received a channel.

When selecting a channel, or if “LOADING” appears in the display

while selecting a channel, JOG roller, and preset buttons mayX x ⁄

not work.

• You cannot select a channel until the unit ﬁnishes receiving the entire

audio data or text information.

The unit automatically turns power oﬀ.

• The Auto Power Down is functioning. This turns oﬀ the unit

automatically when no operation is performed for the speciﬁed time. To

change the setting, see “Using Other Functions”.

Sound distortion occurs.

• When using the unit with the car connecting pack or RF modulator,

sound distortion may occur. Adjust the Line Out Level. See “Using

Other Functions”.

The sound is low.

• Adjust the Line Out Level to the maximum level. See “Using Other

Functions”.

Display is dim, or no indication is displayed.

• The unit is being used in extremely high or low temperatures or in a

place with excessive moisture.

The remote commander does not function.

• Remove any obstacles between the remote commander and the unit.

• Use the remote commander near the unit.

• Point the remote commander at the remote sensor on the unit.

• Replace battery in the remote commander with new one if it is weak.

Cradle release

button

Printed on 100%

recycled paper using

VOC (Volatile Organic

Compound)-free

vegetable oil based ink.

Remote commander

Parts and Identiﬁcations

Main unit

Display window

DSPL/BACK/BAND*2

MEMO

JOG roller (MENU/ENTER)

Preset buttons (1-5)*1

Cradle release button

Using the JOG Roller (MENU/ENTER)

Turn up or down to select channels,

select the menu items and settings, or

scroll the stored text information in

the menu operation.

Press to display the menu display, or

execute the items or settings in the

menu operation.

Displaying the Radio ID

The receiver has its own ID, and an ID number is required when

registering in XM.

1 Press to turn on the main unit.POWER

2 Turn JOG roller (or press X⁄x on the remote) to select

“

XM1

CH0 RADIO ID”.

The radio ID appears.

CHO RADIO ID

XXXXXXXX

XM1

Note

The Radio ID can be displayed only in Channel Scroll mode. See “Playing

the Receiver”.

Adjusting the Time Difference

This unit displays the current time by correcting the time diﬀerence

between the local time and UTC (coordinated universal time) data being

transmitted. Set the “hour” of your local time in the menu display. The

factory-set is the eastern standard time.

If the current UTC data is not received, “– – : – –” appears in the display.

1 Press to turn on the main unit.POWER

2 Press JOG roller (or MENU on the remote) to show the

menu display.

The ﬁrst menu item appears.

SCROLL MODE

3 Turn JOG roller (or press X⁄x on the remote) to select

“TIME ADJUST” and press (or on theJOG roller ENTER

remote).

The “hour” ﬂashes.

TIME ADJUST

11:12AM

12:00 AM = midnight

12:00 PM = noon

4 Turn JOG roller (or press X⁄x on the remote) to adjust the

hour and press on the remote).JOG roller (or ENTER

The display returns to the tuned channel display.

Note

This unit does not have the Daylight Saving Time (summer time)

function.

To check the current time while listening to a broadcast

Press DSPL/BACK/BAND (or DSPL on the remote) until the “

INFO

” and

“

TIME

” display appears. See “Checking the Tuned Channel

Information”.

To cancel a selection

Press DSPL/BACK/BAND (or BACK on the remote) to return to the

previous display during menu operation.

Press MENU on the remote commander to exit the menu display. The

display returns to the tuned channel display.

Playing the Receiver

Notes

• Turn down the volume of the component connected to the unit before

playing the unit.

• Adjust the volume of the component connected to the unit.

• If sound distortion occurs when playing the unit with the car

connecting pack or RF modulator, adjust the Line Out Level. See “Using

Other Functions”.

Manual Tuning

1 Make settings on your car audio or ampliﬁer, etc. so that you

can listen to the sound from this unit.

2 Press to turn on the main unit.POWER

The channel that you last tuned in to is displayed.

CH13

TOP 20

XM1

CHAN

3 Turn JOG roller (or press X⁄x on the remote) to select

desired channel.

• Holding down makes the channel readout to rapidly increase orX x ⁄

decrease respectively.

• This unit has two scroll modes: Channel Scroll and Category Scroll. See

“Using the Category Scrolls”.

Channel Scroll:searches for a channel by scrolling every single channel

among authorized channels.

Category Scroll: searches for a channel using the Channel Category you

selected in the menu display.

To turn oﬀ the receiver

Press .POWER

Direct Tuning

You can tune in to the desired channel by directly pressing the numeric

buttons (1-0) on the remote commander.

1 Press the desired channel number with the numeric buttons

on the remote.

The display shows the speciﬁed channel number.

CH123

XM1

2 Press SELECT on the remote.

Even if you do not press SELECT, the channel is tuned in after a few

seconds.

Using the Category Scrolls

In Category Scroll mode, you can search for a channel among authorized

channels that have the corresponding Channel Category you selected in

the menu display.

1 Press JOG roller (or MENU on the remote) to show the

menu display.

“SCROLL MODE” appears in the display.

2 Press JOG roller (or ENTER on the remote).

The current scroll mode appears in the display.

SCROLL MODE

CHANNEL SCROLL

3 Turn JOG roller (or press X⁄x on the remote) to select

“CATEGORY SCROLL” and press JOG roller (or ENTER on

the remote).

The selected Channel Category appears in the display.

CATEGORY SCROLL

NEWS

4 Turn JOG roller (or press X⁄x on the remote) to select the

desired Channel Category and press JOG roller (or ENTER

on the remote).

The unit searches for a channel that has the selected Channel Category

from the Channel Number next to the current channel.

The CATEGORY indicator appears in the upper left corner of the

display.

To cancel a selection

Press DSPL/BACK/BAND (or BACK on the remote) to return to the

previous display during menu operation.

Press MENU on the remote commander to exit the menu display. The

display returns to the tuned channel display.

Tips

• When you tune in to a channel in Category Scroll mode, the Channel

Category appears for about 2 seconds in the display.

CH50

News

XM1

• When there is no channel that has the speciﬁed Channel Category,

“CH---” is displayed.

Note

When the Category list cannot be received depending on the receiving

condition, “--------” is displayed in step 3 above, and you cannot select the

Channel Category.

Presetting your Favorite Channels

Preset Tuning

You can preset up to 20 channels onto the preset buttons (1–5) in each

band (XM1-XM4). To access the preset channels, simply press the

corresponding preset buttons (1–5).

All the preset buttons are preset to Channel Number 1 at the factory.

Presetting a channel

1 Follow steps 1 to 2 in “Manual Tuning”.

2 Hold down DSPL/BACK/BAND for more than 2 seconds, or

press BAND on the remote to show the display for selecting a

band.

Channel Name

Channel Number

3 Press DSPL/BACK/BAND (or BAND on the remote) to select

the desired band.

The band changes in the following order:

tttt XM1 XM2 XM3 XM4

4 Turn JOG roller (or press X⁄x on the remote) to select

desired channel you wish to preset.

Hold down the desired preset button for more than 2 seconds.

The preset number appears.

CH50 PRESET1

Financial News

XM1

CHAN

The previous preset channel is deleted and the unit presets the

channel being received.

Note

You cannot preset channels using the remote.

Tuning in to a preset channel

1 Press to turn on the main unit.POWER

2 Hold down DSPL/BACK/BAND for more than 2 seconds, or

press BAND on the remote to show the display for selecting a

band.

3 Press DSPL/BACK/BAND (or BAND on the remote) to select

the desired band.

The band changes in the following order:

tttt XM1 XM2 XM3 XM4

4 Press the desired preset button (1–5).

Checking the Tuned Channel

Information

This unit has three display modes in the tuned channel display.

1 Press (or on the remote).DSPL/BACK/BAND DSPL

The display mode changes as follows:

CH13

TOP 20

Maria

Christmas Song

Concert starts

11:00AM 12/24/02

XM1

CHAN

NAME

TITLE

INFO

TIME

Tips

•When the Additional Information text has more than 16 characters, text

will be scrolled every 2 seconds.

After all Additional Information is displayed, --- + --- + --- + --- +“ ”

appears for about 2 seconds and then repeats displaying from the

beginning.

•As the unit memorizes the display mode when the power is turned oﬀ,

the display appears in the last display mode when you turn on the unit.

Note

If the channel has no text information, will appear in the display.“ ”--------

Storing the Information

You can store the text information contained in the tuned-in channel. This

unit can store ten sets of the following information:

– Channel Number

– Channel Name

– Artist Name or Feature

– Song or Program Title

– Additional Information and Time/Date

Note

When you store the eleventh set of information, the oldest one will be deleted.

1 Press MEMO when the channel you wish to store the

information is received.

“ ”MEMORIZED appears for about 2 seconds and the information is

stored in MEMO 1“ ”.

The memory numbers of already stored information increases by one.

MEMORIZED

Viewing the stored information

1 Press JOG roller (or MENU on the remote) to show the

menu display.

2 Turn JOG roller (or press X⁄x on the remote) to select

“ ”MEMO and press JOG roller (or ENTER on the remote).

MEMO

MEMO 1

If no information is stored, NO MEMO will appear.“ ”

3 Turn JOG roller (or press X⁄x on the remote) to select the

desired memory number and press JOG roller (or ENTER

on the remote).

4 Turn JOG roller (or press X⁄x on the remote) to scroll the

stored text information.

The information appears in the following order: Artist Name/Feature

t t t Song/Program Title Additional Information Channel

Number t Channel Name t Time and date.

To return to the display for selecting the memory number

Press DSPL/BACK/BAND (or BACK on the remote).

To exit the menu display

Press MENU on the remote commander. The display returns to the tuned

channel display.

Using other Functions

You can also use the following functions in the menu display.

Menu See

Scroll mode “Using the Category Scroll”

Memo “ ”Storing the Information

Back Light below

Beep below

Time Adjust “Adjusting the Time Diﬀerence”

Contrast below

Auto Power Down below

Line Out Level below

Reception Status below

To cancel a selection

Press DSPL/BACK/BAND (or BACK on the remote) to return to the

previous display.

Press on the remote commander to exit the menu display.MENU

Note

When no operation is performed for about 1 minute in the menu display

except for the Reception Status, the unit cancels a selection and the

display returns to the tuned channel display.

Back Light

You can select the lighting level of the display window. The factory-set is

“ ”BRIGHT .

1 Press JOG roller (or MENU on the remote) to show the

menu display.

2 Turn JOG roller (or press X⁄x on the remote) to select

“ ”BACK LIGHT and press JOG roller (or ENTER on the

remote).

The current setting appears in the display.

BACK LIGHT

BRIGHT

3 Turn JOG roller (or press X⁄x on the remote) to select the

desired setting and press JOG roller (or ENTER on the

remote).

BRIGHT: makes the display window bright.

DIM: makes the display window dim.

OFF: turns oﬀ the lighting of the display window.

Beep

You can turn the beep on or oﬀ. The factory-set is “ ”ON .

1 Press JOG roller (or MENU on the remote) to show the

menu display.

2 Turn JOG roller (or press X⁄x on the remote) to select

“ ”BEEP and press (or JOG roller ENTER on the remote).

The current setting appears in the display.

BEEP

3 Turn JOG roller (or press X⁄x on the remote) to select

“ ” “ ”ON or OFF and press on theJOG roller (or ENTER

remote).

Contrast

You can adjust the contrast of the display window in 8 levels. The factory-

set is level 4.

1 Press JOG roller (or MENU on the remote) to show the

menu display.

2 Turn JOG roller (or press X⁄x on the remote) to select

“ ”CONTRAST and press (or JOG roller ENTER on the

remote).

The current setting appears in the display.

CONTRAST

L H

3 Turn JOG roller (or press X⁄x on the remote) to adjust

contrast while checking the display and press (orJOG roller

ENTER on the remote).

Auto Power Down

Auto Power Down function automatically turns oﬀ the unit when the

speciﬁed time passes from the last button operation. The factory-set is 60“

min”.

1 Press JOG roller (or MENU on the remote) to show the

menu display.

2 Turn JOG roller (or press X⁄x on the remote) to select

“ ”AUTO POWER DOWN and press JOG roller (or ENTER

on the remote).

The current setting appears in the display.

AUTO POWER DOWN

60min

3 Turn JOG roller (or press X⁄x on the remote) to select

setting and press (or JOG roller ENTER on the remote).

The setting changes as follows:

OFF 60 min 120 min 180 min

When you select a setting other than , the Auto Power Down“ ”OFF

indicator appears in the lower left corner of the display. To disable the

Auto Power Down function, select “OFF.”

When the speciﬁed time passes, the following messages appear in the

display.

POWERING DOWN

NO POWER DOWN?

PRESS ANY KEY

When no button is pressed, the unit turns oﬀ the power. If you press

any button, the timer duration will begin from the start.

1 2 3

BA ND

MEMO DSPL

4 5 6 1

7 8 9 2

SELECT

BA CK

ENTER

PRESET

POWER

Menu icon

Menu item

Channel Category

Preset Number

Channel Number

Channel Name

Artist Name/Feature

Song/Program Title

Additional Information

Current Time and Date

Memory number

2 seconds

Line Out Level

You can adjust the output level of the signal from the LINE OUT jack in 8

levels. The factory-set is level 8 (Maximum.).

Standard level adjustment

•When the car connecting pack or RF modulator is connected to the

LINE OUT jack of the unit and using it in a car, turn down the Line Out

Level to avoid sound distortion.

•When the car connecting pack or RF modulator is not connected to the

LINE OUT jack, set the Line Out Level to the maximum level.

1 Press JOG roller (or MENU on the remote) to show the

menu display.

2 Turn JOG roller (or press X⁄x on the remote) to select

“ ”LINE OUT LEVEL and press (or JOG roller ENTER on the

remote).

The current setting appears in the display.

LINE OUT LEVEL

3 Turn JOG roller (or press X⁄x on the remote) to adjust the

Line Out Level while listening to the radio and press JOG

roller ENTER (or on the remote).

Reception Status

When you install the XM antenna for home use, you can check the

reception status in 4 levels.

1 Press JOG roller (or MENU on the remote) to show the

menu display.

2 Turn JOG roller (or press X⁄x on the remote) to select

“ ”RECEPTION STATUS and press (or JOG roller ENTER on

the remote).

The current reception status appears in the display.

RECEPTION STATUS

L H

When a reception is poor and you receive interrupted sound, etc.

The following indicators appear. In this case, adjust the XM antenna

so that two or more indicators light up. See Placement of the Home“

Antenna” in the “Digital Audio Receiver Accessory Kit” Installation

Guide.

L H

When you obtain a good reception

The following indicators appear.

L H

Remote sensor

Cradle

release

button

DSPL

POWER*1

MEMO

Numeric

buttons

SELECT

BACK

X x/

POWER

BAND*2

PRESET

ENTER

Band Number

Radio ID

*1The POWER and preset button No. 3 on the main unit have a tactile dot.

*2To show the display for selecting a band, hold down DSPL/BACK/

BAND for more than 2 seconds, or press BAND on the remote.

To select a band, press DSPL/BACK/BAND (or BAND on the remote).

No indicator or only one indicator lights up.

Two or more indicators light up.

Specyfikacje produktu

Marka:	Sony
Kategoria:	Tuner audio
Model:	DRN-XM01H2
Kolor produktu:	Black,Stainless steel
Rodzaj żarówki:	Halogen
Typ kontroli:	Czujnik
Wbudowany wyświetlacz:	Tak
Automatyczne wyłączanie zasilania:	Tak
Napięcie wejściowe AC:	230 V
Wysokość produktu:	945 mm
Szerokość produktu:	600 mm
Głębokość produktu:	415 mm
Poziom hałasu:	55.1 dB
Obciążenie:	160 W
Lampy:	40 W
Roczne zużycie energii:	- kWh
Prędkości:	3
Maksymalna moc ekstrakcji:	600 m³/h
Rodzaj ekstrakcji:	Kanałowe / obiegowe
Poziom hałasu (niska prędkość):	37 dB
Rodzaj filtra tłuszczu:	Aluminium
Poziom hałasu (średnia prędkość):	52 dB
Minimalna odległość od płyty gazowej:	500 mm
Minimalna odległość od płyty elektrycznej:	450 mm
Średnica przyłącza odprowadzającego dym:	120 mm
Maksymalna moc recyrkulacji:	550 m³/h
Poziom hałasu (tryb recyrkulacji):	55.8 dB