Instrukcja obsługi Sonance SB46-65

Sonance soundbar SB46-65

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sonance SB46-65 (9 stron) w kategorii soundbar. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/9

SONANCE SOUNDBARS

I N S T R U C T I O N M A N UA L

Introduction

Thank you for purchasing the Sonance Soundbar. When properly

installed, your new Soundbar will give you years of entertainment

pleasure. The Sonance Soundbar is a high performance Left,

Center, & Right 3-way speaker system housed in a sealed

aircraft grade aluminum enclosure. Sonance Soundbar models

are designed to meet the design and width of modern at panel

televisions. Your Soundbar is intended to match the following size

television displays: SB46-55 for displays 55” diagonal; SB46-65 for

displays 65” diagonal; SB46-75 for displays 75” diagonal; SB46-85

for displays 85” diagonal. Sonance Adjustable Width Soundbars

are designed to slide wider or narrower to match medium or large

TV displays as follows: SB46L for displays 70” to 80” diagonal;

SB46M for displays 50” to 65” diagonal.

Soundbar

Display Attachment Rails

Flat Soundbar

Connectors

Recessed Soundbar

Connectors

Key Hole Wall Mount Template

Key Hole

Wall Mounts

Display Spacers

Black Opaque Strips

(Included with adjustable

width soundbars only)

Before any installation carefully plan where wiring will pass through

walls. Perform an obstruction survey using a stud nder to be

certain there are no studs, conduit, pipes, heating ducts, pocket

doors or air returns in the wall cavity. If you are unsure about

obstructions, drill a small hole near where the Soundbar wire

terminals will be located and insert a coat hanger wire into the hole

to feel around for possible obstructions.

Wall Mount Installations

Soundbar Models:

SB46-55 | SB46-65 | SB46-75 | SB46-85

Adjustable Width Models:

SB46 M | SB46 L

Box Contents

(1) Soundbar

(2) Flat soundbar connectors

(2) Display attachment rails

(2) Recessed soundbar connectors

(1) Key hole wall mount template

(2) Key hole wall mounts

(2) Display spacers

(2) Black opaque strips

Hardware Pack Contents

A. (4) M8 10mm screws for display attachment rails

B. (4) M8 14mm screws for at Soundbar connector

C. (4) M8 23mm short screws for recessed Soundbar

connector

D. (4) M8 38mm long screws for recessed Soundbar

connector

E. (4) M6 25mm screws

F. (4) M8 25mm screws

G. (8) M8 nuts

H. (8) M6 washers

I. (8) M8 washers

J. (4) Rubber feet

IMPORTANT: VERIFY THE WALL MOUNT WILL SUPPORT THE COMBINED

WEIGHT OF THE DISPLAY AND SOUNDBAR.

• SB46-55

Weighs 24 lbs (10.9kg) installed, suitable for 55” displays.

• SB46-65

Weighs 25 lbs (11.3kg) installed. Suitable for 65” displays.

• SB46-75

Weighs 30 lbs (13.6kg) installed. Suitable for 75” displays.

• SB46-85

Weighs 31 lbs (14.1kg) installed. Suitable for 85” displays.

• SB46 M

Weighs 24 lbs (10.88kg) installed. Suitable for displays 50” to 65”

(1270mm to 1651mm).

• SB46 L

Weighs 29 lbs (13.15kg) installed. Suitable for displays 70” to 80”

(1778mm to 2032mm).

NOTE: CAREFULLY FOLLOW INSTALLATION DIRECTIONS FOR THE THIRD

PARTY DISPLAY WALL MOUNT.

A. B. C.

D. E. F.

G. H. I. J.

Soundbar Connectors for Wall Mount

Brackets

Choose and attach the correct soundbar connector to the

display attachment rails for your desired depth. The at soundbar

connector will align with 2 5/8” (65mm) deep displays. The

recessed soundbar connector will align with displays from 1 7/32” -

2 3/32” (31.74 - 53mm) deep.

Attaching the Soundbar Connector

Option 1:

Flat Soundbar Connector

Option 2:

Recessed Soundbar Connector

Option 1: Flat Soundbar Connector

Option 3:

Table Top Installation

Option 4:

Key Hole Wall Mount

Placement and Options Overview

Sonance Soundbars are designed to attach directly to most at

panel display wall mounts using VESA mounting points with the

included attachment rails, connectors, and hardware.

• Installation Option 1

Mounting to TV display mount using FLAT soundbar connector.

The at soundbar connector will align with displays 2 5/8”

(65mm) deep.

• Installation Option 2

Mounting to TV display mount using RECESSED soundbar

connector. The recessed soundbar connector will align with

displays from 1 7/32” - 2 3/32” (31.74mm - 53mm) deep.

• Installation Option 3

Table top installation. Soundbars can additionally be cabinet

or table top mounted using the rubber feet included in your

box contents.

• Installation Option 4

Key hole wall mounting is an alternative option accomplished

by using the key hole wall mounts combined with the wall

mount template.

Option 1:

Flat Soundbar Connector

Option 2:

Recessed Soundbar Connector

Run three sets of speaker wires: Left channel, Center channel,

Right channel as well as the necessary video cable from the

amplier to the display location. Whenever possible leave extra

wire to make it easy to connect the wire to the Soundbar spring

terminals prior to hanging the display. Extra wire can then be

pushed back into the wall.

NOTE: CONSULT LOCAL BUILDING CODES BEFORE RUNNING SPEAKER

AND ELECTRICAL WIRES THROUGH WALLS.

NOTE: FOR INSTALLATION OPTIONS 3 AND 4, BEGIN ON PAGE 6.

Option 1 - Flat Soundbar Connector

The at soundbar connector will align with 2 5/8” (65mm) displays.

Use the A. screws to connect to the display attachment rails.

Specyfikacje produktu

Marka:	Sonance
Kategoria:	soundbar
Model:	SB46-65
Kolor produktu:	Biały
Rodzaj zasilania:	Prąd przemienny
Wbudowany wyłącznik:	Tak
Wysokość produktu:	300 mm
Szerokość produktu:	165 mm
Głębokość produktu:	207 mm
Waga produktu:	4700 g
Podręcznik użytkownika:	Tak
Rekomendowane użycie:	Dom
Technologia łączności:	Przewodowa
Impedancja:	8 Ω
Moc wyjściowa (RMS):	- W
Kanały wyjścia audio:	1.0 kan.
Waga wraz z opakowaniem:	11200 g
Rodzaj opakowania:	Pudełko
Współczynnik zawartości harmonicznych:	1 %
Regulacja głośności:	obrotowy
Zasięg częstotliwości:	40 - 33000 Hz
Rozmieszczenie głośników:	Floor,Stand-mountable,Tabletop/bookshelf
Ilość przetworników:	1
Średnica sterownika:	25 mm
Wzmacniacz:	Nie
Czułość:	84 dB
Obsługa funkcji Plug & Play:	Tak
Typ głośnika:	2-drożny
Średnica sterownika średniego zasięgu (imperial):	5 "
Średnica mid-range:	130 mm
Materiał stożka:	Aluminium
Liczba głośników średniotonowych:	1