Instrukcja obsługi Smeg SACD7

Smeg Suszarka bębnowa SACD7

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Smeg SACD7 (20 stron) w kategorii Suszarka bębnowa. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

Dryer

SACD 7

Read this manual prior to initial operation of the product!

Dear Customer,

We hope that your product, which has been manufactured in modern facilities and passed through a strict quality

control procedure, will give you very good results.

We advise you to read through this manual carefully before using your product and keep it for future reference.

This User Manual will

• Help you use your machine in a fast and safe way.

• Read the User Manual before installing and starting your product.

• In particular, follow the instructions related to safety.

• Keep this User Manual within easy reach for future reference.

• Please read all additional documents supplied with your product.

Remember that this User Manual is also applicable for several other models.

Explanation of symbols

Throughout this User Manual the following symbols are used:

A Important safety information. Warning for hazardous situations with regard to life and property.

B Caution; Warning for supply voltage.

Caution; Warning for fire hazard.

Caution; Warning for hot surfaces.

Read the instructions.

C Useful information. Important information or useful hints about usage.

This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping

it off in the municipal receptacles provided for this purpose. Your appliance also contains a great amount

of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed

with other waste. This way, the appliance recycling organised by your manufacturer will be done under

the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical

and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points

closest to your home. We thank you doing your part to protect the environment.

SACD7_EN/220213.1621

3EN

1 Important safety information

This section includes safety information that will help

protection from risks of personal injuries or materialistic

damages. Failure to follow these instructions shall cause

any warranty and reliability commitment to become void.

General safety

• Never place the machine on a carpet-covered floor,

otherwise, lack of airflow beneath the machine may

cause electrical parts to overheat. This will cause

problems with your machine.

• If the power cable or mains plug is damaged, you

must call Authorised Service Agent for repair.

• The product should not be plugged in during

installation, maintenance and repair works. Such

works should always be made by the technical

service. Manufacturer shall not be held responsible

for damages arising from processes carried out by

unauthorised persons.

• Connect the product to a grounded outlet protected by

a fuse of suitable capacity as stated in the technical

specifications table.

• Operate your product at temperatures between +5°C

and +35°C.

• Do not use electrical devices in the product.

• Do not connect the air exit of the product to the

chimney holes which are used for the exhaust fumes

of the devices operating with gas or other types of

fuel.

• You must provide enough ventilation in order to

prevent gases exiting from devices operating with

other types of fuels including the naked flame from

accumulating in the room due to the back fire effect.

• Always clean the lint filter before or after each loading.

• Never operate your dryer without the lint filter

installed.

• Do not allow fibre, dust and dirt accumulation around

the exhaust exit and at adjacent areas.

• Power cable plug must be within easy reach after

installation.

• Do not use extension cords, multi-plugs or adaptors to

connect the dryer to power supply in order to decrease

the risk of electric shock.

• Do not make any changes on the plug supplied with

the product. If it is not compatible with the socket,

have a qualified electrician change the socket with a

suitable one.

• Items cleaned or washed with gasoil/fuel oil, dry-

laundry solvents and other combustible or explosive

materials as well as the items that are contaminated

or spotted with such materials should not be dried in

the product since they emit flammable or explosive

vapor.

• Do not dry items cleaned with industrial chemicals in

the dryer.

• Do not dry unwashed items in the dryer.

• Items soiled with cooking oils, acetone, alcohol, fuel

oil, kerosene, stain remover, turpentine, paraffin and

paraffin removers must be washed in hot water with

plenty of detergent before being dried in the dryer.

• Garments or pillows bolstered with rubber foam

(latex foam), shower bonnets, water resistant textiles,

materials with rubber reinforcement and rubber foam

pads should not be dried in the dryer.

• Do not use fabric softeners and anti-static products

unless they are recommended by the manufacturers

of the fabric softener or the product.

• This product must be grounded. Grounding installation

decreases the risk of electric shock by opening a path

with low resistance for the electricity flow in case of

a malfunction or failure. Power cable of this product

is equipped with a conductor and a grounding plug

that allows for grounding the product. This plug must

be installed appropriately and inserted into a socket

which is grounded in accordance with the local laws

and regulations.

• Do not install the product behind a door with a lock,

sliding door or a door that has a hinge against the

hinge of the dryer.

• Do not install or leave this product in places where it

will be exposed to outdoor conditions.

• Do not tamper with the controls.

• Do not perform any repair or part replacing procedures

on the product even if you know or have the ability to

perform unless it is clearly suggested in the operating

instructions or the published service manual.

• Inside and exhaust duct of the product must be

cleaned by the qualified service personnel periodically.

• Wrong connection of grounding conductor of the

product can cause electric shock. If you have

any suspect about the grounding connection,

have it checked by a qualified electrician, service

representative or service personnel.

• Do not reach into the machine when the drum is

spinning.

• Unplug the machine when it is not in use.

• Never wash down the appliance with water! There

is the risk of electric shock! Always disconnect by

unplugging from the mains before cleaning.

• Never touch the plug with wet hands. Never unplug

by pulling on the cable, always pull out by grabbing

the plug only. Do not operate the machine if the power

cable or plug is damaged!

• Never attempt to repair the machine yourself,

otherwise, you will be putting your life and others’ lives

in danger.

• For malfunctions that cannot be solved by following

the information given in the safety instructions:

Turn off the machine, turn off and contact an

authorised service agent.

• Do not stop the dryer before the drying cycle comes

to an end unless you will remove all laundry from the

dryer fast in order to lay them and dissipate the heat.

• Remove the door of the drying compartment before

decommissioning or disposing of the product.

• The final step of the drying cycle (cool-down cycle)

occurs without applying heat to ensure that the items

Specyfikacje produktu

Marka:	Smeg
Kategoria:	Suszarka bębnowa
Model:	SACD7

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Smeg SACD7, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Suszarka bębnowa Smeg

Smeg SACD7 Instrukcja

25 Grudnia 2024

Smeg DHT81EIT Instrukcja

23 Grudnia 2024

Smeg DN93SL Instrukcja

23 Grudnia 2024

Smeg DN72CE Instrukcja

23 Grudnia 2024

Smeg DN82SE Instrukcja

23 Grudnia 2024

Smeg DN83SE Instrukcja

23 Grudnia 2024

Smeg SAHP 7 Instrukcja

4 Października 2024

Smeg DNP83SL Instrukcja

3 Października 2024

Smeg DNP83SEUK Instrukcja

2 Października 2024

Smeg SAHP86 Instrukcja

2 Października 2024

Instrukcje Suszarka bębnowa

Najnowsze instrukcje dla Suszarka bębnowa

Beko BM3T39232CW Instrukcja

23 Grudnia 2024

Beko BM3T38232CW Instrukcja

23 Grudnia 2024

Hoover HLE V9LF-80 Instrukcja

23 Grudnia 2024

Candy CROE H9A2TBE-S Instrukcja

23 Grudnia 2024

Miele T 8937 WP Instrukcja

23 Grudnia 2024

Miele TCR870 WP Instrukcja

23 Grudnia 2024

Miele TWF660 WP Instrukcja

23 Grudnia 2024

Candy CSE C8LG-47 Instrukcja

22 Grudnia 2024

Candy CSE C10LG-47 Instrukcja

22 Grudnia 2024

Candy CSOE H8A2DE-47 Instrukcja

22 Grudnia 2024