Instrukcja obsługi Smeg PTV64

Smeg piec PTV64

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Smeg PTV64 (14 stron) w kategorii piec. Ta instrukcja była pomocna dla 30 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/14

Contents

1. Instructions for safe and proper use____________________ 19

2. Positioning of hob__________________________________ 20

2.1 Attachment to support structure ________________________________________20

3. Electrical connection _______________________________ 22

4. Gas connection ___________________________________ 23

4.1 Connection to LPG __________________________________________________24

4.2 Ventilation of rooms _________________________________________________24

4.3 Discharge of combustion products ______________________________________24

5. Adapting to different types of gas______________________ 25

5.1 Removing the hob___________________________________________________25

5.2 Regulation for LPG __________________________________________________26

5.3 Regulation for natural gas_____________________________________________26

5.4 Regulation of primary air______________________________________________27

5.5 Reassembling the hob _______________________________________________27

5.6 Regulation of minimum for natural gas ___________________________________27

5.7 Regulation of minimum for LPG ________________________________________28

5.8 Arrangement of burners on hob ________________________________________28

5.9 Lubrication of gas taps _______________________________________________28

6. Description of controls ______________________________ 29

6.1 Front control panel __________________________________________________29

7. Using the hob _____________________________________ 30

7.1 Burner lighting with safety device _______________________________________30

7.2 Practical advice for using the burners____________________________________30

7.3 Diameter of containers _______________________________________________30

8. Cleaning and maintenance___________________________ 31

8.1 Cleaning stainless steel ______________________________________________31

8.2 Cleaning of components ______________________________________________31

THESE INSTRUCTIONS ARE VALID ONLY FOR END USER COUNTRIES WHOSE IDENTIFICATION SYMBOLS

APPEAR ON THE COVER OF THIS MANUAL.

THIS BUILT-IN HOB IS CLASS 3.

INSTRUCTIONS FOR THE INSTALLER: these are for the qualified technician who

must carry out a suitable check of the gas system, install the appliance, set it

functioning and carry out an inspection test.

INSTRUCTIONS FOR THE USER: these contain user advice, description of the

commands and the correct procedures for cleaning and maintenance of the appliance.

Instructions for safe and proper use

1. Instructions for safe and proper use

THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS

ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE COOKING

HOB. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING

THE COOKING HOB. ALSO KEEP THE SERIES OF NOZZLES SUPPLIED. INSTALLATION MUST BE

CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN FORCE.

THIS APPLIANCE IS INTENDED FOR DOMESTIC USES AND CONFORMS TO CURRENT

REGULATIONS IN FORCE. THE APPLIANCE HAS BEEN BUILT TO CARRY OUT THE FOLLOWING

FUNCTIONS: COOKING AND HEATING-UP OF FOOD. ALL OTHER USES ARE CONSIDERED

IMPROPER.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE.

DO NOT LEAVE THE PACKING IN THE HOME ENVIRONMENT. SEPARATE THE VARIOUS WASTE

MATERIALS AND TAKE THEM TO THE NEAREST SPECIAL GARBAGE COLLECTION CENTRE.

IT IS OBLIGATORY FOR THE ELECTRICAL SYSTEM TO BE GROUNDED ACCORDING TO THE

METHODS REQUIRED BY SAFETY RULES.

THE PLUG TO BE CONNECTED TO THE POWER CABLE AND THE SOCKET MUST BE THE SAME

TYPE AND MUST CONFORM TO CURRENT REGULATIONS.

THE SOCKET MUST BE ACCESSIBLE AFTER THE APPLIANCE HAS BEEN BUILT IN.

NEVER UNPLUG BY PULLING ON THE CABLE.

IMMEDIATELY AFTER INSTALLATION CARRY OUT A BRIEF INSPECTION TEST OF THE COOKING

HOB, FOLLOWING THE INSTRUCTIONS BELOW. SHOULD THE APPLIANCE NOT FUNCTION,

DISCONNECT IT FROM THE SUPPLY AND CALL THE NEAREST TECHNICAL ASSISTANCE CENTRE.

NEVER ATTEMPT TO REPAIR THE APPLIANCE.

ALWAYS CHECK THAT THE CONTROL KNOBS ARE IN THE “ZERO” (OFF) POSITION WHEN YOU

FINISH USING THE HOB.

DO NOT PUT PANS WITHOUT PERFECTLY SMOOTH AND FLAT BOTTOMS ON THE COOKING HOB

GRIDS.

DO NOT USE RECIPIENTS OR GRIDDLE PLATES THAT EXTEND BEYOND THE EXTERNAL

PERIMETER OF THE HOB.

THE I.D. PLATE WITH TECHNICAL DATA, REGISTRATION NUMBER AND BRAND NAME IS

POSITIONED VISIBLY UNDER THE CASING, ATTACHED TO THIS MANUAL AND APPLIED TO THE

QUALITY CERTIFICATE.

THE PLATE ON THE CASING MUST NOT BE REMOVED.

THE HOB IS TO BE USED BY ADULTS ONLY. DO NOT LET UNSUPERVISED CHILDREN PLAY WITH

THE HOB.

THIS APPLIANCE IS MARKED ACCORDING TO THE EUROPEAN DIRECTIVE 2002/96/EC ON WASTE

ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE).

THIS GUIDELINE IS THE FRAME OF A EUROPEAN-WIDE VALIDITY OF RETURN AND RECYCLING ON

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT.

The manufacturer declines all responsibility for damage to persons or things caused

by non-observance of the above prescriptions or by interference with any part of the

appliance or by the use of non-original spares.

Instructions for the installer

2. Positioning of hob

The following operation requires building and/or carpentry work so must be carried out

by a competent tradesman.

Installation can be carried out on various materials such as masonry, metal, solid

wood or plastic laminated wood as long as they are heat resistant (T 90°C).

2.1 Attachment to support structure

Create an opening with the dimensions shown in the figure in the top surface of the

counter, keeping a minimum distance of 50 mm from the rear border. This unit may be

set against walls that are higher than the hob as long as distance “X” (see figure) is

maintained to prevent damage to the walls due to overheating. Make sure there is a

minimum of 750 mm between the hot plate flames and any shelf that may be installed

directly above them. In case of installation on a hollow compartment with doors, a

separating panel has to be placed under the hob. Keep a minimum distance of 10 mm

between the bottom of the unit and the panel surface. The panel has to be easily

removable to allow access in the event of technical service.

Specyfikacje produktu

Marka:	Smeg
Kategoria:	piec
Model:	PTV64
Kolor produktu:	Srebrny
Położenie urządzenia:	Wbudowany
Wysokość produktu:	0 mm
Szerokość produktu:	600 mm
Głębokość produktu:	510 mm
Rodzaj płyty grzejnej:	Gaz
Liczba palników/stref gotowania:	4 stref(y)
Zapłon elektroniczny:	Tak