Instrukcja obsługi Sloan Basys EFX-3324014

Sloan Dźwig Basys EFX-3324014

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sloan Basys EFX-3324014 (12 stron) w kategorii Dźwig. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
Code No. 0816408
Rev. 4 (12 /11)
INSTALLATION INSTRUCTIONS FOR ELECTRONIC
INFRARED SENSOR ACTIVATED LAVATORY FAUCETS
LIMITED WARRANTY
Unless otherwise noted, Sloan Valve Company warrants this product, manufactured and sold for commercial or industrial uses, to be free from defects in material and workmanship
for a period of three (3) years (1 year for SF faucets, special finish and PWT electronics and 30 days on PWT software) from date of first purchase. During this period, Sloan Valve
Company will, at its option, repair, replace, or refund the purchase price of any product which fails to conform with this warranty under normal use and service. This shall be the sole
and exclusive remedy under this warranty. Products must be returned to Sloan Valve Company, at customer’s cost. No claims will be allowed for labor, transportation or other costs.
This warranty extends only to persons or organizations who purchase Sloan Valve Company’s products directly from Sloan Valve Company for purpose of resale. This warranty does
not cover the life of the battery.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE
COMPANY RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.
EFX-2XX SERIESEFX-1XX SERIES
EFX-150.500.0000
Model Shown
(High Model with Bowed
Crown and Water
Temperature Adjustment)
EFX-277.502.0000
Model Shown
(Mid LCD Solar Model with
Water Temperature Adjustment
and Scrub Time Display)
MODEL GUIDE OR BUILD YOUR FAUCET ONLINE AT WWW.SLOANVALVE.COM
–––– Body
Type Power Crown .Mix Sensing Flow Rate .Batteries Base
Plate Adapters Drain
Pop-Up
0 Hardwire Standard None.Active IR 0.5 gpm (1.9 Lpm)
Multi-Lam Spray Insert .Alkaline None None No
1High .Below Deck,
Mechanical – 4-inch Yes.US Plug-in
2Mid .Below Deck,
Thermostatic 1.5 gpm (5.7 Lpm)
Insert . 8-inch UK Plug-in
3 – – . . EU Plug-in
4 – – .Box Mount
5 Battery Solar .Integral Side
Mixer – – .
6 LCD – – . .
7 Solar LCD + Solar .
BASYS
EFX __ __ __ . __ __ __ . __ __ __ __
Choose one from each column.
Includes Full Stream Laminar and Full Stream Aerated Inserts.
Any Application.
Any Environment.
FAUCET ROUGH-IN
2”
(51 mm)
2-1/4”
(57 mm)
2-9/16”
(65 mm)
4-1/4”
(108 mm)
1-1/8”
(29 mm)
7”
(178 mm)
5-3/4”
(146 mm)
6-1/2”
(165 mm)
15”
(380 mm)
10”
(252 mm)
6”
(158 mm)
2”
(51 mm)
12/15”
(21 mm)
7-9/32”
(185 mm)
6-5/8”
(168 mm)
20°
1-7/32”
(31 mm)
2-1/2”
(63 mm)
2-1/4”
(57 mm)
5/16”
(8 mm)
29°
20°
6-3/8”
(162 mm)
1-7/32”
(31 mm)
12/15”
(21 mm)
3-11/16”
(94 mm)
3-1/2”
(90 mm)
34°
2-1/2”
(64 mm)
SPOUT
TEMPERED
SUPPLY
O-RING
RETAINER
NUT
1-3/16” (30 mm) MIN.
DIA. HOLE REQUIRED
13” (330 mm)
LONG FLEX HOSE
SINGLE SUPPLY
0.5 gpm (1.9 Lpm) Max. Flow
Faucets with SingleTempered Water Supply
DUAL SUPPLY
0.5 gpm (1.9 Lpm) Max. Flow
Faucets with Hot and Cold Water Supply
HOT
SUPPLY COLD
SUPPLY
MIXING LEVER
(Can Be Set and
Removed)
1-1/2” (38 mm)
MAX. DECK
THICKNESS
SPOUT
O-RING
1-3/16” (30 mm)
MIN. DIA. HOLE
REQUIRED
RETAINER
NUT
13” (330 mm)
LONG FLEX HOSE
1-1/2” (38 mm)
MAX. DECK
THICKNESS
If a connection to separate hot and cold
water supplies is desired, then a
Bak-Chek® tee fitting must be used
prior to connecting to the faucet.
‡ Sloan BASYS™ Series Faucets are available with a 1.5 gpm (5.7 Lpm) Laminar and Aerated Inserts.
2
• 2.5 mm allen key for removing crown
• 5/8” open end wrench for U.S. hose fittings
• 3/4” open end wrench for International hose fittings
• 13 mm socket or nut driver for mounting nut
TOOLS REQUIRED FOR INSTALLATION
Prior to installing the Sloan BASYS™ Series Faucets, install the items listed below.
Also, refer to rough-in illustrations.
Lavatory/sink
Drain line
Hot and cold water supply lines or pre-tempered water supply line
Important:
• ALLPLUMBINGSHOULDBEINSTALLEDINACCORDANCE
WITH APPLICABLE CODES AND REGULATIONS.
• FLUSHALLWATERLINESPRIORTOMAKINGCONNECTIONS.
• KEEPTHREADSEALANTOUTOFYOURWATERWAYTO
PREVENT COMPONENT PART DAMAGE! DO NOT USE ANY
SEALANT ON COMPRESSION FITTINGS.
Base Plates
When the BASYS™ Faucet is installed on a sink that has three (3) hole punchings, a
Base Plate should be used. Base Plates should be specified at time of
ordering.
EFX-20 Base Plate for 4” (102 mm) Centerset Sink
EFX-26 Base Plate for 8” (203 mm) Centerset Sink
PRIOR TO INSTALLATION
3
1 - INSTALL FAUCET
2-SECURETOSINKDECK
ARemove Nut and Faucet Retainer.
DO NOT remove the D-shaped gasket from base of
faucet.
FAUCET
CENTER HOLE
IN DECK OR
LAVATORY
FAUCET
RETAINER
AND GASKET NUT
D-SHAPED GASKET
DO NOT REMOVE
FAUCET
RETAINER
Install Faucet with faucet retainer into the center hole in deck or
lavatory — 1-3/16” (30 mm) min. hole required.
NOTE: If installing the Faucet on a three (3) hole
sink, a Base Plate should be installed at this time.
B
13 mm
NUT
FAUCET
FAUCET
RETAINER
MODELS POWERED
BY PLUG-IN
ADAPTER ONLY
DO NOT pull or
crimp AC Power
Line.
FLEX HOSE
3 - CONNECT TO WATER SUPPLY
AIMPORTANT: Flush dirt, debris, and
sediment from Supply Line(s) before
Connecting Flex Hoses.
BInstall flex hose(s) with gaskets
onto supply stops.
CTighten the flex hose(s) (with
gaskets in place) securely to
the supply. SUPPLY LINE/
STOP
GASKET
FLEX HOSE
EOpen Supply Stop(s).
For single supply faucets
Install flex hose with gasket onto mixing
valve and connect check tee or mixing
valve to hot and cold water supplies.
D


Specyfikacje produktu

Marka: Sloan
Kategoria: Dźwig
Model: Basys EFX-3324014

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sloan Basys EFX-3324014, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Dźwig Sloan

Instrukcje Dźwig

Najnowsze instrukcje dla Dźwig