Instrukcja obs艂ugi Skytronic 651.548

Skytronic R贸偶norodny 651.548

Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Skytronic 651.548 (14 stron) w kategorii R贸偶norodny. Ta instrukcja by艂a pomocna dla 3 os贸b i zosta艂a oceniona przez 2 u偶ytkownik贸w na 艣rednio 4.5 gwiazdek

Pobierz PDF
Strona 1/14
INVERTER
150W 300W
651.530 12V
651.533 Shuko 24V
651.542 12V
651.545 B/FR 24V
Instruction Manual
Gebruiksaanwijzing
Mode d鈥橢mploi
Gebrauchsanleitung
651.536 12V
651.539 Shuko 24V
651.548 12V
651.551 B/FR 24V
GB
Thank you for purchasing this SkyTronic inverter. Read this manual carefully and keep it for future reference.
Warnings
- Read the manual prior to using the unit.
- Keep the manual for future reference.
- Keep the packaging for safer transport in its original packaging
- Install the unit in such a way that sufficient cooling is ensured.
- The unit contains voltage carrying parts. DO NOT open the unit.
- When you unplug the unit from the mains always pull the plug, never the lead.
- Never plug or unplug the unit with wet hands.
- If the plug and/or mains lead are damaged, they need to be repaired by a qualified technician.
- If the unit is damaged to an extent that you can see internal parts, do not plug the unit into a mains
outlet.
- Repairs have to be carried out by a qualified technician.
- Do no place the unit near heat sources.
- When the unit operates, NEVER touch the battery clamps, this may result in electric shock.
- Do not clean the unit with solvents or detergents. Only use a dry cloth for cleaning.
- Make sure that no small objects or liquids can enter the housing.
General Features
This range of inverters from SkyTronic transforms a 12 VDC battery voltage into a 230 VAC mains voltage.
Thus enabling you to use your domestic equipment everywhere you want to use it. It can be used on boats,
caravans, campers, cars etc.
Important!
Under full load, high current is flowing through the battery cables. Therefore it is recommended to use only
the supplied cables and no extension cables in order to avoid unacceptable voltage losses. If necessary, use
an extension cord in the 230V circuit to the connected unit. To comply with the legal standards, the inverter
may only be used with the supplied low voltage cables. Do NOT extend them.
The connected battery must be in good condition and fully charged. After some time, it may be necessary to
start the car or boat in order to recharge the battery. At that moment, the inverter must be switched OFF
beforehand in order to avoid damage due to excessive battery voltage.
GENERAL SAFETY
1. Always operate the inverter from the correct power source, 12V or 24V battery (As applicable).
2. When connecting the cables from the battery to the inverter observe the correct polarity, RED is positive
(+) and BLACK is negative (-). REVERSING the polarity will damage the inverter and is not covered by
the warranty.
3. Ensure the DC input connections are secure, because a loose contact can result in excessive voltage
drop and can cause overheated wires and melted insulation.
4. Locate the inverter and power source (battery) away from any inflammables to avoid any possible fire or
explosion. NOTE. It is normal to experience sparks when connecting the positive terminal of the inverter
from the battery. This is due to the current flow charging the capacitors in the inverter.
5. Where applicable, always ground the inverter before operation to avoid possible shock.
6. Check that the power consumption of the appliance to be operated is compatible with the output capacity
of the inverter. Thus, you can鈥檛 power a 450W drill machine with a 300W inverter.
7. The battery must be of adequate capacity (ampere-hour) to run the inverter at the required power. The
maximum current ratings for the various inverter models are:
12V-300W = 33A
The capacity of a battery is stated in Ah (Amps/hour) and is noted on the battery. This capacity is
applicable over a period of 20 hours. Example: A battery with a capacity of 48 Ah can deliver a current of
2.4 Amps during 20 hours or a current of (a bit less than) 4.8 Ah during 10 hours. At a higher current, the
capacity is always a bit lowered.
8. Insert an in-line fuse with the proper rating into the cable leading to the battery.
9. Disconnect the inverter when not in use.

Specyfikacje produktu

Marka: Skytronic
Kategoria: R贸偶norodny
Model: 651.548

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z Skytronic 651.548, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮


Instrukcje R贸偶norodny Skytronic

Skytronic

Skytronic 651.542 Instrukcja

23 Wrze艣nia 2024
Skytronic

Skytronic 651.539 Instrukcja

22 Wrze艣nia 2024
Skytronic

Skytronic 651.671 Instrukcja

21 Wrze艣nia 2024
Skytronic

Skytronic 651.533 Instrukcja

18 Wrze艣nia 2024
Skytronic

Skytronic 651.536 Instrukcja

17 Wrze艣nia 2024
Skytronic

Skytronic 710.285 Instrukcja

17 Wrze艣nia 2024
Skytronic

Skytronic 651.674 Instrukcja

17 Wrze艣nia 2024
Skytronic

Skytronic 651.530 Instrukcja

16 Wrze艣nia 2024
Skytronic

Skytronic 651.548 Instrukcja

13 Wrze艣nia 2024

Instrukcje R贸偶norodny

Najnowsze instrukcje dla R贸偶norodny

Walkera

Walkera Goggle 3 Instrukcja

15 Pa藕dziernika 2024
Walkera

Walkera Goggle 4 Instrukcja

15 Pa藕dziernika 2024
Somfy

Somfy Telis Lounge Instrukcja

5 Pa藕dziernika 2024
Navman

Navman NavBus Instrukcja

5 Pa藕dziernika 2024
Trelock

Trelock LS 320 Instrukcja

5 Pa藕dziernika 2024
DJI

DJI Phantom 3 Standard Instrukcja

5 Pa藕dziernika 2024
Bobike

Bobike Maxi City Instrukcja

5 Pa藕dziernika 2024
Tanita

Tanita 1210N Instrukcja

5 Pa藕dziernika 2024
Kerbl

Kerbl 81685 Cat flap Instrukcja

5 Pa藕dziernika 2024
Tanita

Tanita HC-212F Breath Checker Instrukcja

5 Pa藕dziernika 2024