Instrukcja obsługi SkyRC SK-100013

SkyRC Batterij-oplader SK-100013

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SkyRC SK-100013 (28 stron) w kategorii Batterij-oplader. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/28
Professional Balance Charger Discharger /
Built In AC Power Supply-
INSTRUCTION MANUAL
TABLE OF CONTENTS
INTRODUCTION......................................................................................
SPECIAL FEATURES.............................................................................
WARNING AND SAFETY NOTES.........................................................
PROGRAM FLOW CHART......................................................................
LITHIUM BATTERY(LIPO/LILO/LIFE)PROGRAM...................................
Charging Lithium battery at balance mode................................................
Charging of Lithium Battery.......................................................................
‘FAST' charging of Lithium battery.............................................................
'STORAGE' control of lithium battery.........................................................
Discharging Lithium battery.......................................................................
Pb( lead-sulphuric acid) battery program................................................
Charging of Pb battery.............................................................................
Discharging of Pb battery...........................................................................
NIMH/NICD BATTERY PROGRAM.........................................................
Charging of NiCd/NiMH battery..................................................................
Charging NiCd/NiMH battery in the AUTO charge mode...........................
Discharging of NiCd/NiMH battery..............................................................
Charging NiCd/NiMH Battery In Re-Peak Charge Mode............................
Charge/discharge & discharge/charge cycle of NiMH/NiCd battery...........
BATTERY MEMORY SET........................................................................
PROGRAM SET UP.................................................................................
LITHIUM BATTERY METER.....................................................................
VARIOUS INFORMATION DURING THE PROCESS..............................
WARNING AND ERROR MESSAGE.....................................................
SPECIFICATION......................................................................................
RECOMMENDED ACCESSORIES.........................................................
CONFORMITY DECLARATION..............................................................
WARRANTY AND SERVICE..................................................................
02
04
06
10
11
12
12
13
14
14
15
15
15
16
16
16
16
17
17
17
19
20
22
23
24
25
26
26
INTRODUCTION
INTRODUCTION
Congratulations on your choice of the SKYRC QUATTRO B6AC digital intelligent charger from
SKYRC Technology Co., Ltd. You are now the owner of a compact charger with battery
management and integral balancer.
The unit is simple to use, but the operation of a sophisticated automatic charger such as
the SKYRC QUATTRO B6AC does require some knowledge on the part of the user.
These operating instructions are designed to ensure that you quickly become familiar
with its functions.
It is therefore important that you read right through the Operating Instructions, Warning
and Safety Notes before you attempt to use your new automatic charger for the first time.
We hope you have many years of pleasure and success with your new battery charger.
SKYRC QUATTRO B6AC is a high performance micro processor control charge/discharge - ,
station with battery management suitable for use with all current battery types. With integral
equalizer for six cell Lithium Ion LiIon Lithium Polymer LiPo and Lithium-Ferrum (LiFe) - - ( ), - ( )
batteries.
Maximum 6A charge current can be powered by a 12 Volt car battery or from 100V-240V via the ;
built in switch-mode power supply.
And the circuit features four totally independent identical power outputs which are powered 50
watts each. Total powers are 200 watts. As a result , it can charge or discharge up to 4 x 15 cells
of NiCd/NiMH or 4 x 6 series of Lithium batteries simultaneously. Quattro B6AC has four
individual cell voltage balancer at each outputs, so it does not required any balancer separately
when charging Lithium Battery LiPo LiIon LiFe for voltage balancing ( / / ) .
When a Nickel battery is fully charged, the unit terminates the process using the Delta-Peak
method. Lithium and lead (Pb) batteries are charged using the CC-CV method.
The fan cooling system is so smart and efficient. The fan speed is controlled by
internal temperature sensor.
Following instructions only apply to one of the four chargers, as all of them operate
according to same principle.
Please BE SURE to read these instructions and Warning and Safety Notes before you
use the charger for the first time.
It can be dangerous to mis-handle batteries and battery chargers, as there is always a
risk of batteries catching fire and exploding.
This charger is designed and approved exclusively for use with the types of battery
stated in these Instruction Manual. SKYRC accepts no liablility of any kind if the charger
is used for any purpose other than that stated. We are unable to ensure that you follow
the instructions supplied with the charger, and we have no control over the methods you
employ for using, operating and maintaining the device. For this reason we are obliged
to deny all liability for loss, damage or costs which are incurred due to the incompetent
or incorrect use and operation of our products, or which are connected with such
operation in any way. Unless otherwise prescribed by law, our obligation to pay
compensation, regardless of the legal argument employed, is limited to the invoice value
of those SKYRC products which were immediately and directly involved in the event in
which the damage occurred.
Liability Exclusion

Specyfikacje produktu

Marka: SkyRC
Kategoria: Batterij-oplader
Model: SK-100013

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SkyRC SK-100013, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Batterij-oplader SkyRC

SkyRC

SkyRC B6AC+ V2 Instrukcja

17 Września 2024
SkyRC

SkyRC BD250 Instrukcja

10 Września 2024
SkyRC

SkyRC D400 Instrukcja

8 Września 2024
SkyRC

SkyRC SK-100013 Instrukcja

9 Sierpnia 2024

Instrukcje Batterij-oplader

Najnowsze instrukcje dla Batterij-oplader

Absaar

Absaar S-M Instrukcja

19 Września 2024
Akyga

Akyga AK-BC-02 Instrukcja

19 Września 2024
Lenmar

Lenmar SOLOXP-KF Instrukcja

19 Września 2024
Gp Batteries

Gp Batteries PowerBank 202160 Instrukcja

18 Września 2024
Gp Batteries

Gp Batteries PowerBank PB50GS Instrukcja

18 Września 2024
AccuPower

AccuPower IQ216 Instrukcja

18 Września 2024
Scosche

Scosche PowerVolt PSQC3-SP Instrukcja

17 Września 2024
Tecmate

Tecmate Optimate Lithium Instrukcja

16 Września 2024
Eufab

Eufab 16616 Instrukcja

16 Września 2024
4Load

4Load Charge Box 7.0 Instrukcja

16 Września 2024