Instrukcja obsługi SkyRC DPG-020


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SkyRC DPG-020 (2 stron) w kategorii Zabawki sterowane radiem. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
INSTRUCTION MANUAL
The digital pitch gauge is designed for application in model helicopters and serves to measure
the rotor blade pitch value.
The built in digital gyroscopic sensor is capable of detecting pitch angle, with result displayed
through LCD screen, providing a simple and precise way of measuring pitch angle.
- -1
DPG-020 Micro Digital Pitch Gauge
Large LCD for easy reading
Measure up to 450 size helicopter
Fast and accurate measurement
Zero function
Auto rotating display
Auto power-off (Power shuts down after 5 minutes without any movement)
FEATURES
Power and
Zero Button
LCD Display
Blade Clamp
ILLUSTRATION
SPECIFICATIONS
Body Dimension
Suitable blade width
Detectable pitch range
Temperature
Resolution
Current consumption
Battery
Weight (including battery)
44x37.2x14mm
15mm~35mm
±90°
0~40°C
0.1°
4.5mA
CR2032 Lithium X1
20g
Digital Pitch Gau
ge DPG-020
- -2
HOW TO USE
Press “POWER” button to turn on the power. For correct pitch measurements, DPG-020
digital pitch gauge must be zeroed before being used. Press “POWER” button once to zero
the gauge. Please refer to the below instruction to understand how to use DPG-020. After
used, Press “POWER” button for about two seconds to turn off.
HOW TO CHANGE BATTERIES
Low battery could contribute to reduced screen brightness and abnormal startup. Please
replace battery should this occurs.
Open the battery compartment by removing the four screws at the back of the pitch gauge
with a philips-head screw driver.
Remove the battery compartment cover.
Insert / replace one CR2032 batteries while observing the correct polarity.
Close the battery compartment and fasten it with the four screws.
1.
2.
3.
4.
Should the pitch gauge display abnormal behavior after accidental shock or impact, proceed
to remove and re-install battery to reset the device.
Manufactured by
SKYRC TECHNOLOGY CO LTD ., .
www skyrc com. .
RoHS
7504-0379-01
Place the DPG-020 horizontally
leveled with top of helicopter
frames.
Press “POWER” to zero the
gauge.
ZERO THE GAUGE
Mount the DPG-020 on main
blade to measure the pitch.
MEASURE THE PITCH
Digital Pitch Gauge DPG-020
We guarantee this product to be free of manufacturing and assembly defects for a period of one year
from the time of purchase. The warranty only applies to material or operational defects, which are
present at the time of purchase. During that period, we will repair or replace free of service charge for
products deemed defective due to those causes.
For any repair or replace service, please contact your dealer in the first instance, who is responsible for
processing guarantee claims. This warranty is not valid for any damage or subsequent damage arising
as a result of misuse, modification or as a result of failure to observe the procedures outlined in this
manual.
WARRANTY AND SERVICE


Specyfikacje produktu

Marka: SkyRC
Kategoria: Zabawki sterowane radiem
Model: DPG-020

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SkyRC DPG-020, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Zabawki sterowane radiem SkyRC

SkyRC

SkyRC SK-300046 Instrukcja

11 Września 2024
SkyRC

SkyRC Toro TS150 Instrukcja

11 Września 2024
SkyRC

SkyRC DPG-020 Instrukcja

10 Września 2024
SkyRC

SkyRC SK-600075 Instrukcja

8 Września 2024
SkyRC

SkyRC Toro TS120A Instrukcja

8 Września 2024
SkyRC

SkyRC SK-600072 Instrukcja

7 Września 2024
SkyRC

SkyRC Toro TS160 Instrukcja

6 Września 2024
SkyRC

SkyRC SK-500020 Instrukcja

6 Września 2024
SkyRC

SkyRC iMax B6 EVO Instrukcja

6 Września 2024

Instrukcje Zabawki sterowane radiem

Najnowsze instrukcje dla Zabawki sterowane radiem