Instrukcja obsługi Skil HD182001

Skil maszyna wiertnicza HD182001

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Skil HD182001 (50 stron) w kategorii maszyna wiertnicza. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/50
WARNING: To reduce the risk of injury, the user must read and understand the
Owner’s Manual before using this product. Save these instructions for future reference.
AVERTISSEMENT : Afin de réduire les risques de blessure, l’utilisateur doit lire et
comprendre le guide d’utilisation avant d’utiliser cet article. Conservez le présent guide
afin de pouvoir le consulter ultérieurement.
ADVERTENCIA : Para reducir el riesgo de lesiones, el usuario debe leer y comprender
el Manual del operador antes de utilizar este producto. Guarde estas instrucciones para
consultarlas en caso sea necesario.
Owner’s Manual
Guide d’utilisation
Manual del propietario
OR
TABLE OF CONTENTS
General Power Tool Safety Warnings 3-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Warnings for Hammer Drills 4-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Additional Safety Warnings 5-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Symbols 7-9 .....................................................
Get to Know Your Hammer Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Specications .................................................10
Operating Instructions 11-13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance ...................................................14
Extension Cords 14-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting ...............................................15
Limited Warranty of Skil Consumer Portable,
Benchtop and Hd and Shd Heavy Duty Power Tools . . . . . . . . . . . . . . . . . . 16
WARNING
Some dust created by power sanding, sawing, grinding, drilling and other construction
activities contains chemicals known to the State of California to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
Lead from lead-based paints.
Crystalline silica from bricks, cement, and other masonry products.
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending upon how often you do this type of work.
To reduce your exposure to these chemicals:
Work in a well-ventilated area.
Work with approved safety equipment, such as dust masks that are specially designed to
lter out microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and
other construction activities. Wear protective clothing and wash exposed areas with soap
and water. Allowing dust to get into your mouth or eyes or to lie on the skin may promote
absorption of harmful chemicals.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING Read all safety warnings, instructions, illustrations and specications
provided with this power tool. Failure to follow all instructions listed
below may result in electric shock, re and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE
REFERENCE.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of
ammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodied plugs and matching
outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is earthed
or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the inuence of drugs,
alcohol or medication. A moment of inattention while operating power tools may result in
serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment
such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for
appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or energising power tools that have the
switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.

Specyfikacje produktu

Marka: Skil
Kategoria: maszyna wiertnicza
Model: HD182001

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Skil HD182001, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje maszyna wiertnicza Skil

Skil

Skil HD182001 Instrukcja

23 Sierpnia 2024
Skil

Skil 3075 CA Instrukcja

23 Sierpnia 2024
Skil

Skil 3070 HA Instrukcja

23 Sierpnia 2024
Skil

Skil 1780 MA Instrukcja

23 Sierpnia 2024
Skil

Skil 3000 CA Instrukcja

23 Sierpnia 2024
Skil

Skil 3005 GA Instrukcja

23 Sierpnia 2024
Skil

Skil 6725 GA Instrukcja

23 Sierpnia 2024
Skil

Skil 1020 AA Instrukcja

23 Sierpnia 2024
Skil

Skil 6398 AA Instrukcja

23 Sierpnia 2024
Skil

Skil 6725 AA Instrukcja

23 Sierpnia 2024

Instrukcje maszyna wiertnicza

Najnowsze instrukcje dla maszyna wiertnicza

HiKOKI

HiKOKI DV36DA Instrukcja

24 Października 2024
HiKOKI

HiKOKI DH26PC2 Instrukcja

24 Października 2024
HiKOKI

HiKOKI DH28PCY2 Instrukcja

24 Października 2024
Alpha Tools

Alpha Tools ASE 18/2 GA Instrukcja

22 Października 2024
Alpha Tools

Alpha Tools ASE 14,4 AK Instrukcja

22 Października 2024
Alpha Tools

Alpha Tools AS 18 A Instrukcja

22 Października 2024
Meec Tools

Meec Tools 008-199 Instrukcja

7 Października 2024
Meec Tools

Meec Tools 001-098 Instrukcja

6 Października 2024
Metabo

Metabo PowerMaxx BS 12 BL Instrukcja

1 Października 2024
Proviel

Proviel HTM 1305/1 Instrukcja

1 Października 2024