Instrukcja obsługi Skil 2898LI-04
Skil
maszyna wiertnicza
2898LI-04
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Skil 2898LI-04 (52 stron) w kategorii maszyna wiertnicza. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/52
IMPORTANT: IMPORTANT : IMPORTANTE:
Read Before Using Lire avant usage Leer antes de usar
Operating/Safety Instructions
Consignes de fonctionnement/sécurité
Instrucciones de funcionamiento y seguridad
2898
For English Version Version française Versión en español
See page 2 Voir page 18 Ver la página 34
1-877-SKIL999 (1-877-754-5999) www.skil.com
Call Toll Free for
Consumer Information
& Service Locations
Pour obtenir des informations
et les adresses de nos centres
de service après-vente,
appelez ce numéro gratuit
Llame gratis para
obtener información
para el consumidor y
ubicaciones de servicio
SM 1619X04447 08-09:SM 1619X04447 08-09 8/19/09 1:47 PM Page 1
-2-
Work area safety
Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Electrical safety
Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating the power tool in damp locations
is unavoidable use a Ground Fault Circuit
Interrupter (GFCI) protected supply. Use of
an GFCI reduce the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention
while operating power tools may result in
serious personal injury.
Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the
switch is in the off-position before
connecting to power source and / or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energizing power tools that have the
switch on invites accidents.
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a
key left attached to a rotating part of the power
tool may result in personal injury.
Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.
Dress properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in
moving parts.
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
Power tool use and care
Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
Do not use the power tool if the switch does
not turn it on and off. Any power tool that
cannot be controlled with the switch is
dangerous and must be repaired.
Read all safety warnings and instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in all of the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
!
WARNING
General Power Tool Safety Warnings
SM 1619X04447 08-09:SM 1619X04447 08-09 8/19/09 1:47 PM Page 2
Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of
parts and any other condition that may
affect the power tools operation. If damaged,
have the power tool repaired before use.
Ma ny accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
Use the power tool, accessories and tool
bits etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
Battery tool use and care
Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
Under abusive conditions, liquid may be
ejected from the battery, avoid contact. If
contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Service
Have your power tool serviced by a qualified
repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Safety Rules for Cordless Drills/Drivers
Wear ear protectors with impact drills.
Exposure to noise can cause hearing loss.
Use auxiliary handles supplied with the
tool. Loss of control can cause personal injury.
Hold power tools by insulated gripping
surfaces when performing an operation
where the cu tting tools may contact
hidden wiring. Contact with a “live” wire will
make exposed metal parts of the tool “live”
and shock the operator.
Use clamps or other practical way to
secure and support the workpiece to a
stable platform. Holding the work by hand
or against your body is unstable and may
lead to loss of control.
Do not drill, fasten or break into existing
walls or other blind areas where electrical
wiring may exist. If this situation is
unavoidable, disconnect all fuses or circuit
breakers feeding this worksite.
Always hold the tool with both hands. If
the bit jams two ha nds wi ll give you
maximum control over torque reaction or
kickback.
Always wear safety gogg les or eye
protection when using this tool. Use a
dust mask or respirator for applications
which generate dust.
Secure the material being drilled. Never
hold it in your hand or a cross l egs.
Unstable support can cause the drill bit to
bind causing loss of control and injury.
Disconnect battery pack from tool before
making any assembly, adjustments or
changing accessories. Such preventive
safety measures reduce the risk of starting the
tool accidentally.
Position yourself to avoid being caught
between the tool or side handle and walls
or posts. Should the bit become bound or
-3-
SM 1619X04447 08-09:SM 1619X04447 08-09 8/19/09 1:47 PM Page 3
Specyfikacje produktu
| Marka: | Skil |
| Kategoria: | maszyna wiertnicza |
| Model: | 2898LI-04 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Skil 2898LI-04, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna wiertnicza Skil
23 Sierpnia 2024
23 Sierpnia 2024
23 Sierpnia 2024
23 Sierpnia 2024
23 Sierpnia 2024
23 Sierpnia 2024
23 Sierpnia 2024
23 Sierpnia 2024
23 Sierpnia 2024
23 Sierpnia 2024
Instrukcje maszyna wiertnicza
- maszyna wiertnicza Worx
- maszyna wiertnicza Milwaukee
- maszyna wiertnicza Bosch
- maszyna wiertnicza Parkside
- maszyna wiertnicza Global
- maszyna wiertnicza Festool
- maszyna wiertnicza Bavaria By Einhell
- maszyna wiertnicza Stanley
- maszyna wiertnicza Black & Decker
- maszyna wiertnicza Scheppach
- maszyna wiertnicza Proxxon
- maszyna wiertnicza DeWalt
- maszyna wiertnicza Einhell
- maszyna wiertnicza Genesis
- maszyna wiertnicza Silverline
- maszyna wiertnicza Makita
- maszyna wiertnicza Ozito
- maszyna wiertnicza RYOBI
- maszyna wiertnicza DEDRA
- maszyna wiertnicza Baumr-AG
- maszyna wiertnicza Hilti
- maszyna wiertnicza Rodcraft
- maszyna wiertnicza Trotec
- maszyna wiertnicza Dremel
- maszyna wiertnicza Velleman
- maszyna wiertnicza Meec Tools
- maszyna wiertnicza Güde
- maszyna wiertnicza Zipper
- maszyna wiertnicza McKenzie
- maszyna wiertnicza Ferm
- maszyna wiertnicza Hitachi
- maszyna wiertnicza Craftsman
- maszyna wiertnicza Ridgid
- maszyna wiertnicza PowerPlus
- maszyna wiertnicza Alpha Tools
- maszyna wiertnicza HiKOKI
- maszyna wiertnicza Proviel
- maszyna wiertnicza Porter-Cable
- maszyna wiertnicza Metabo
- maszyna wiertnicza C-Power
- maszyna wiertnicza Cotech
- maszyna wiertnicza Maestro
- maszyna wiertnicza Clas Ohlson
- maszyna wiertnicza Laserliner
- maszyna wiertnicza Cocraft
- maszyna wiertnicza Pansam
- maszyna wiertnicza Wolfcraft
- maszyna wiertnicza Kinzo
- maszyna wiertnicza Luxor
- maszyna wiertnicza Kress
Najnowsze instrukcje dla maszyna wiertnicza
24 Października 2024
24 Października 2024
24 Października 2024
22 Października 2024
22 Października 2024
22 Października 2024
7 Października 2024
6 Października 2024
1 Października 2024
1 Października 2024