Instrukcja obsługi Simplecom EC318


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Simplecom EC318 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
PCI-e p1-x4 to USB 3.2 Gen2x2 20Gbps
USB-C Expansion Card
Interface
Safety Information
Please disconnect PC from power before installing. During PC
component assembly all cabling has to be disconnected from
the computer. It may cause electric shock or damage to PC
component.
When installing the PC component cards please note ESD
(Electrostatic discharge) may cause damage to the PC. Please
touch a metal object to discharge or wear antistatic gloves
before installation.
Specifications
· Bus: PCI Express 3.0 p1-x4 lanes
· Interface: 1x USB-C (USB 3.2 Gen2x2)
· Controller: ASM3242 and ASM1541 USB 3.2 Gen 2x2 controllers
· Speed Support: SuperSpeed USB 20Gbps/10Gbps/5Gbps,
HiSpeed USB 480Mbps
· Power Source: Powered by PCI-e slot, SATA Power Connector for
additional power
· USB Power Output: 5V3A max
· Supported System: Windows 8 and above
· SuperSpeed USB 20Gbps, compliant with USB 3.2 Gen2x2
· PCI Express 3.0 p1-x4 lanes (also works on p1-x8 or x16 lanes)
· Compliant with PCI Express Specification 3.0
· Compliant with USB 3.2 Rev. 1.0, Intel xHCI Specification 1.2
· Compliant with USB Attached SCSI Protocol (UASP) Specification 1.0
· Includes low profile slot cover for supporting low profile cases
· Plug and play, no driver required
Features
EC318 is a PCI Express to SuperSpeed USB 20Gbps expansion card
features USB 3.2 Gen2x2 USB-C interface. This expansion card
supports data transfer rate up to 20Gbps and provides enough
bandwidth for fast portable SSD storage devices.
Designed for PCI-e 3.0 and above version, this PCI-e card is
applicable to most PCs with PCI-e interface (PCI-e p1-x4 x8 or x16) on
the motherboard. It works up to 20Gbps for data transfer when
connecting to USB 3.2 Gen2x2 compliant peripherals, while
maintaining compatibility with existing USB peripheral devices.
EC318
KC008-ASM3242+ASM1541-V4.2
RoHS
KC008-ASM3242+ASM1541-V4.2
RoHS
PCI Express 3.0 p1-x4 lanes
15pin SATA Power Connector
1 2 3 4
1. High-profile bracket
2. LED indicator for power
3. USB-C (USB 3.2 Gen 2x2)
4. LED indicator for connection status
About Product
This product includes one (1) year repair/replacement warranty
provide by Simplecom Australia. This warranty is non-transferable
and is limited to the original purchaser.
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or
refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have
the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
For our assistance with regards to warranty please email to
support@simplecom.com.au or create a support ticket at
http://www.simplecom.com.au
© Simplecom Australia All Rights Reserved. Simplecom is a registered
trademark of Simplecom Australia Pty Ltd. All other trademarks are property
of their respective owner. Specifications and external appearance are subject
to change without notice. Warranty and technical support covering this
product are only valid in the country or region of purchase.
Warranty
1. Turn your PC off and disconnect power cable
2. Open your PC case and Insert PCI-e card to
PCI-e x4, p2-x8 or x16 slot on motherboard
3. Fasten the metal bracket by screw to secure the card
on PCI-e slot
4. Plug a SATA power cable from PC power supply to the
SATA power port, for additional power when PCI-e can't
supply enough power to expansion card
Note
EC318 does not support DP Alt Mode or USB Power Delivery.
Windows 7 is not supported.
EC318 is designed for PCI-e 3.0 interface. In order to get full
speed of USB 3.2 Gen 2x2, please use a PCI-e slot based on PCI
Express 3.0 or above version on your motherboard.
The actual data transfer speed may be limited by the connected
USB device, please check your USB device for max supported
speed.
Thunderbolt 3 device is supported but only compatible with
10Gbps data transfer rate.
·
·
·
·
·
PCIe×4/8/16
KC008-ASM3242+ASM1541-V4.2
RoHS


Specyfikacje produktu

Marka: Simplecom
Kategoria: Niesklasyfikowane
Model: EC318

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Simplecom EC318, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Simplecom

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024