Instrukcja obsługi Siemens RDE100.1DHW
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Siemens RDE100.1DHW (4 stron) w kategorii termostat. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
1/4 Operating Instructions CB1B1423en_01 / 2013-03-08 Siemens Building Technologies
s
Operating Instructions RDE100.1DHW
RDE100.1DHW is a room thermostat that allows you to set the ideal room temperature at the time you want.
In addition, it offers independent control of DHW. There are several switching patterns available that can be set to
your specific needs.
1. Display
Indicating that
batteries need to be
replaced
Morning: 12-hour format
Afternoon: 12-hour format
Frost protection
(heating) is active
Confirmation
Auto Timer mode
F
Room temperature in
degrees Fahrenheit
View and set Auto
Time switch
C
Room temperature in
degrees Celsius
Comfort mode
Button lock activated
Economy mode
Display of room
temperature, setpoint, etc.
Escape
Heating ON
Display of time
Weekday 1 = Monday
7 = Sunday
Permanent setpoint
setting
Timer bar
Day and time setting
The actual room
temperature
Holiday mode setting
View and set DHW
Auto Time switch
DHW Auto Time
switch activated
2. Change operating mode
3. Set
4. Ok
5. Decrease value
6. Increase value
7 DHW switch ON/AUTO/OFF button
8. Battery holder
Do you want to adjust the time and day?
You can set the current time of day.
set
ok
+
–
mode
Proceed as follows:
• Press and select set
• Press and the time flashes for setting ok
• Press
+
or
–
to adjust the time
• Press to confirm ok
• The weekday flashes, press
+
or
–
to select the desired day
• Press to save the value ok
• Press to exit or wait for the program to exit automatically mode
Do you want to lock the buttons?
mode
Press and hold for at least 7 seconds to activate a button lock. Repeat to unlock. mode
The unit operates normally when the buttons are locked, but no changes are possible while the buttons are locked.
2/4 Operating Instructions CB1B1423en_01 / 2013-03-08 Siemens Building Technologies
Are your rooms too warm/too cold?
+
–
ok
set
mode
Press or to increase or decrease the room + –
temperature setpoint in increments of 0.5 °C / 1 °F .
Proceed as follows:
• Press
+
or
–
to adjust the setpoint temporarily.
This adjustment is reset as soon as the
operating mode changes.
• Press , or to save the value or wait ok set mode
for the program to exit automatically
• To lock the setpoints, use parameters P06 and
P08.
Do you want to change the operating mode?
mode
!
The thermostat provides Comfort mode, Economy
mode, and Auto mode. Changeover between the
operating modes can be made manually by pressing
mode.
Comfort mode is the permanent (24 h) selection
of Comfort. Select this mode to maintain Comfort
temperature permanently without any time switch. It is
used during occupancy periods, for example.
Economy mode is the permanent (24 h) selection
of Economy. Select this mode to maintain the
Economy temperature permanently without any time
switch.
It is used during non-occupancy periods, for example
at night.
AUTO
In , operating modes (Comfort, Auto timer mode
Economy) are changed automatically according to the
time switch set.
Note:
Frost protection is a function always active in the
background. As soon the room temperature falls
below 5 ºC, the unit automatically activates the
heating .
Do you want to set permanent temperature
setpoints?
set
ok
+
–
mode
!
• Press and select set
• Press to confirm ok
• Press to select an operating mode, Comfort mode
or Economy
• Press
+
or
–
to adjust the setpoint permanently.
• Press to confirm ok
• Press to exit or wait for the program to exit mode
automatically
Note: This permanent setpoint is used during Auto timer
mode.
Energy saving tips without loss of comfort
• Select Auto timer mode during the heating period, and set the
time switch according to your normal habits at home
• Select Economy mode or Holiday mode for long periods of
non-occupancy and during summer period
Do you want to set your Holiday mode?
set
ok
+
–
mode
!
Use the Holiday mode to set the thermostat to a
constant temperature while absent.
• Press and select set
• Press to confirm ok
• Press
+
or
–
to adjust the temperature setpoint
• Press to confirm ok
• Press
+
or
–
to adjust the number of days for
holidays (Note: 0 = Holiday mode OFF)
• Press to save the value ok
• When Holiday mode is activated, the remaining
days are displayed on the screen
Note: modeIf you press while Holiday mode is active,
the function is turned off and the
symbol
disappears.
If the Comfort and Economy setpoint values are both
locked, the lowest locked setpoint value is the Holiday
mode setpoint value. You can adjust the setpoint
temperature from 5 ºC up to the lowest locked setpoint
value.
Do you want to enter your own time switch?
Option 1: Time switch with individual day selection (P11=0)
set
ok
+
–
mode
You can select Comfort or Economy at 15 minute
intervals throughout the day. The 0:00 to 24:00 hour
time bar allows you to set the operating mode for the
selected day(s).
Example:
0
6
12
24
18
1 2
Visible bars: Control to Comfort temperature
Invisible bars: Control to Economy temperature
When Auto timer mode is enabled, changeover between
the operating modes is automatic after the settings are
saved.
Proceed as follows:
1) Press and select set
AUTO
.
2) Press to confirm. ok
3) Time switch for day Mon(1) is displayed.
4) Press
+
or
–
to select the day, from Mon(1) to
Sun(7).
5) Press to confirm the selection and initiate time ok
programming.
During programming step:
6) Press to select an operating mode, (Comfort or mode
Economy) or
7) Press
+
or
–
to adjust the time setpoint by 15
minutes for the selected mode.
8) Press to save the time switch. ok
9) Repeat steps 4-8 for all remaining days (if required);
or
10) Press or wait for the program to exit mode
automatically.
3/4 Operating Instructions CB1B1423en_01 / 2013-03-08 Siemens Building Technologies
Option 2: Time switch with the same 7 day selection (P11=1)
set
ok
+
–
mode
You can set all the 7 day time switches at the same
time.
Example:
0
6
12
24
18
1 2
Visible bars: Control to Comfort temperature
Invisible bars: Control to Economy temperature
Proceed as follows:
1) Set the parameter (P11=1). Please refer to the
section " ". Do you want to change parameters
2) Press and select set
AUTO
.
3) Press to confirm. ok
4) Time switch for period Mon (1) - Sun (7) is
displayed.
5) Press to initiate time programming. ok
During programming step:
6) Press to select an operating mode, (Comfort mode
or Economy) or
7) Press
+
or
–
to adjust time setpoint by 15 minutes
for the selected mode.
8) Press to save the time switch. ok
9) Press or wait for the program to exit mode
automatically.
Option 3: Time switch with 5-2 day selection (P11=2)
set
ok
+
–
mode
You can set Monday - Friday time switch at once and
Saturday - Sunday time switch at once.
Example:
0
6
12
24
18
1 2
Visible bars: Control to Comfort temperature
Invisible bars: Control to Economy temperature
Proceed as follows:
1) Set the parameter (P11=2). Please refer to the
section " ". Do you want to change parameters
2) Press and select set
AUTO
.
3) Press to confirm. ok
4) Time switch for period Mon(1) - Fri(5) is displayed.
5) Press
+
or
–
to select the period, Mon (1) - Fri( 5) or
Sat (6) - Sun (7).
6) Press to confirm the selected period and initiate ok
time programming.
During programming step:
7) Press to select an operating mode, (Comfort or mode
Economy) or
8) Press
+
or
–
to adjust the time setpoint by 15
minutes for the selected mode.
9) Press to save the time switch. ok
10) Repeat the steps 5-9 for the other period if
necessary; or
11) Press or wait for the program to exit mode
automatically.
Factory default for 7-day Time switch
Day/s Comfort mode Economy mode
Mo (1) – Fr (5) 6:00 – 8:00 hr
17:00 – 22:00 hr
22:00 – 6:00 hr
8:00 – 17:00 hr
Default
value
Sa (6) – Su (7) 7:00 – 22:00 hr 22:00 – 7:00 hr
Do you want to activate DHW control?
• Press to switch on DHW heating
• While DHW heating is switched on, the
symbol is displayed
• Press
again
• DHW is in the auto status, the
AUTO
symbol is
displayed. DHW switches according to the DHW
time switch.
If you want to see the DHW time bar, press and
hold for 5 seconds. The time bar flashes to
show the programmed DHW times. The timeout
of the DHW timer bar is set with parameter P13
• Press
again
• DHW heating is switched off and the symbol
disappears
DHW can also be switched on/off while frost protection
is active.
Do you want to enter your own time switch for
DHW control?
set
ok
You can enter the DHW Auto Time switch as follows:
• Press and selectset
AUTO
, then press ok
You can select DHW on or off for every 15 minutes
interval of the day. The 0:00 to 24:00 hour time bar
allows you to set DHW on or off for the selected day(s).
Example:
0
6
12
24
18
1 2
Visible bars: DHW control is switched on
Invisible bars: DHW control is switched off
There are 3 options for DHW Time switch setting:
Individual day, 7 day and 5/2 day.
To set the DHW Time switch, please follow the same
steps as in the section "Do you want to enter your
own time switch".
Factory default of 7-day time switch for DHW
Day/s DHW control ON DHW control
OFF
Mo (1) – Fr (5) 6:00 – 8:00 hr
17:00 – 22:00 hr
22:00 – 6:00 hr
8:00 – 17:00 hr
Default
value
Sa (6) – Su (7) 7:00 – 22:00 hr 22:00 – 7:00 hr
Does symbol appear on the display?
Symbol is displayed when the batteries are low. Replace them
with 2 new alkaline batteries type AAA. Proceed as follows:
• Get 2 new alkaline batteries type AAA
• Remove the battery holder, then the batteries, insert the new
batteries and, within 1.5 minutes, replace the battery holder
• Ensure the exhausted batteries are disposed of correctly, in
compliance with environmental requirements
Specyfikacje produktu
| Marka: | Siemens |
| Kategoria: | termostat |
| Model: | RDE100.1DHW |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Siemens RDE100.1DHW, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje termostat Siemens
15 Października 2024
7 Października 2024
5 Października 2024
4 Października 2024
3 Października 2024
1 Października 2024
1 Października 2024
30 Września 2024
29 Września 2024
29 Września 2024
Instrukcje termostat
- termostat AEG
- termostat TP-Link
- termostat Bosch
- termostat Ferroli
- termostat Nobo
- termostat Theben
- termostat Crestron
- termostat Nexa
- termostat Tesla
- termostat Fenix
- termostat Taurus
- termostat Eberle
- termostat Honeywell
- termostat Remeha
- termostat Truma
- termostat ORNO
- termostat Intergas
- termostat Vimar
- termostat Schneider
- termostat Techno Line
- termostat Emos
- termostat Buderus
- termostat Renkforce
- termostat Corbero
- termostat BaseTech
- termostat Viessmann
- termostat Trotec
- termostat Somfy
- termostat Tado
- termostat AVM
- termostat Homematic IP
- termostat Danfoss
- termostat Delta Dore
- termostat Vaillant
- termostat Devolo
- termostat Dimplex
- termostat Baxi
- termostat SPC
- termostat Atag
- termostat Westfalia
- termostat Remko
- termostat Oregon Scientific
- termostat Elro
- termostat Netatmo
- termostat Schwaiger
- termostat Junkers
- termostat Emerson
- termostat Vemer
- termostat Busch-Jaeger
- termostat Elektrobock
- termostat Hunter
- termostat Fibaro
- termostat Salus
- termostat EQ-3
- termostat Emko
- termostat Heatmiser
- termostat Avidsen
- termostat JUNG
- termostat Carrier
- termostat H-Tronic
- termostat EVE
- termostat Elgato
- termostat Wachendorff
- termostat Sygonix
- termostat De Dietrich
- termostat Müller
- termostat Profile
- termostat Nefit
- termostat Agpo Ferroli
- termostat Amfra
- termostat Itho
- termostat Devi
- termostat Stiebel Eltron
- termostat Elco
- termostat Magnum
- termostat Horstmann
- termostat Tylö
- termostat Oventrop
- termostat King
- termostat Arnold Rak
- termostat Nest
- termostat Itho-Daalderop
- termostat Hive
- termostat Saunier Duval
- termostat Seitron
- termostat Plieger
- termostat Aube
- termostat Zehnder
- termostat Bulex
- termostat UPM
- termostat Optima
- termostat AWB
- termostat Finder
- termostat Xavax
- termostat Fantini Cosmi
- termostat Orbis
- termostat Boneco
- termostat Grasslin
- termostat Gira
- termostat Wolf
- termostat HQ
- termostat Max
- termostat Eneco
- termostat Frico
- termostat Vasco
- termostat Radson
- termostat EQ3
- termostat Go Green
- termostat Landis Gyr
- termostat Weishaupt
- termostat ICY
- termostat HomeMatic
- termostat Mikoterm
- termostat Brink
- termostat Drayton
- termostat Oertli
- termostat Heatit
- termostat 2Heat
- termostat Bryant
- termostat Watts
- termostat Etherma
- termostat Emmeti
- termostat Enda
- termostat Eurotronic
- termostat Worcester-Bosch
- termostat Econo-Heat
- termostat VDH
- termostat PECO
- termostat EasyTemp
- termostat Tru Components
- termostat Easy Timer
- termostat Z-Wave
- termostat Hugo Muller
- termostat IMIT
- termostat Innogy
- termostat Wallair
- termostat Maico
- termostat Levica
- termostat HomePilot
- termostat Ouellet
- termostat THERMAFLEX
- termostat Yokis
- termostat ChiliTec
- termostat Eliwell
- termostat Plugwise
- termostat Johnson Control
- termostat Webasto
- termostat Drayton Erie
- termostat OJ ELECTRONICS
- termostat Tellur
- termostat RWE
- termostat Lowes
- termostat Jumo
- termostat Warmup
- termostat Qubino
- termostat STI
- termostat ELKO
- termostat TrickleStar
- termostat Gewiss
- termostat Sinustec
- termostat Rose LM
- termostat Otio
- termostat MundoControl
- termostat GENERAL Life
- termostat Oreg
Najnowsze instrukcje dla termostat
14 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024