Instrukcja obsługi Siemens N2264
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Siemens N2264 (12 stron) w kategorii termostat. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
CE1N2264en
23.04.2002
Siemens Building Technologies
HVAC Products
2264
Self-learning Room
Temperature Controller REV23
5 operating modes, heating / cooling functions and menu selection via roller selector
• Mains-independent room temperature controller
• Straightforward, self-explanatory menu selection via roller selector
• Self-learning 2-position controller providing PID mode (patented)
• Choice of operating modes:
automatic with maximum 3 heating or cooling periods, continuously comfort
mode, continuously economy mode, frost protection with one 24-hour operat-
ing mode and one heating or cooling period
• In automatic mode, one temperature setpoint can be adjusted for each heating
or cooling period
• Control of cooling equipment
Use
For the control of the room temperature in:
• Apartments, single-family or holiday houses
• Offices, individual rooms, consulting rooms or commercially used spaces
For control of the following pieces of equipment:
• Solenoid valves of instantaneous water heaters
• Solenoid valves of atmospheric gas burners
• Forced draft gas or oil burners
• Circulating pumps in heating systems, zone valves
• Electric direct heating systems or fans of electric storage heaters
• Thermic actuators
• Cooling and refrigeration equipment
2/12
Siemens Building Technologies Room Temperature Controller REV23 CE1N2264en
HVAC Products 23.04.2002
Functions
• PID mode with self-learning or selectable switching cycle
• 2-position control
• Automatic mode with 7-day switching program for 24-hour, working day, weekend or
7-day operation with up to 3 heating or cooling periods per day
• One temperature setpoint for each heating or cooling period
• One 24-hour operating mode with one heating or cooling period
• Remote operation
• Override button
• Sensor calibration and reset function
• Frost protection function or overtemperature protection
• Limitation of the minimum setpoint
• Holiday mode
• Heating or cooling mode
• Periodic pump run
• Optimum start control for the first heating period
Ordering
Room temperature controller with 7-day time switch REV23
When ordering, please give the type reference.
The controller is supplied complete with batteries.
Technical design
Display and
operating elements
Operating elements
Selection of operating mode
Warmer button
Colder button
Override button
Roller selector for the menu, submenu and settings
Confirm by pressing
Leaving the current menu level and returning to the menu level
previously active (the settings currently displayed will be ac-
cepted)
3/12
Siemens Building Technologies Room Temperature Controller REV23 CE1N2264en
HVAC Products 23.04.2002
Display
Time of day
° C Room temperature
Change batteries (display appears about 3 months before bat-
teries are exhausted)
Remote operation active
Holiday mode active
Selection of operating mode (only one operating mode is activ)
Automatic mode
Comfort mode
Economy mode
Frost protection or overtemperature protection
24-hour mode with one heating or cooling period
(heating or cooling period is automatically generated from the
current 24-hour program)
Temporary change of the current setpoint temperature
(change only active until the next switching point is reached)
° C When pressing the + or – button once, the adjusted setpoint
temperature will be displayed. It can be readjusted in incre-
ments of 0.2 °C (max. +/- 4 °C).
Override button
In operating modes and , this button can be used to switch from comfort
to economy temperature, or vice versa. The selection is maintained until the
next switching point is reached or until the operating mode is changed.
Menu-driven user settings: 4 main menus available
Time of day and day Main menu Submenu Settings
hCurrent time of day
Current day of week
Temperature Main menu Submenu Factory settings – heating / cooling
T Setpoint comfort mode 19 °C 23 °C
Setpoint economy mode 16 °C 29 °C
Setpoint frost
or overtemperature protection 5 °C 35 °C
Specyfikacje produktu
| Marka: | Siemens |
| Kategoria: | termostat |
| Model: | N2264 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Siemens N2264, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje termostat Siemens
15 Października 2024
7 Października 2024
5 Października 2024
4 Października 2024
3 Października 2024
1 Października 2024
1 Października 2024
30 Września 2024
29 Września 2024
29 Września 2024
Instrukcje termostat
- termostat AEG
- termostat TP-Link
- termostat Bosch
- termostat Ferroli
- termostat Nobo
- termostat Theben
- termostat Crestron
- termostat Nexa
- termostat Tesla
- termostat Fenix
- termostat Taurus
- termostat Eberle
- termostat Honeywell
- termostat Remeha
- termostat Truma
- termostat ORNO
- termostat Intergas
- termostat Vimar
- termostat Schneider
- termostat Techno Line
- termostat Emos
- termostat Buderus
- termostat Renkforce
- termostat Corbero
- termostat BaseTech
- termostat Viessmann
- termostat Trotec
- termostat Somfy
- termostat Tado
- termostat AVM
- termostat Homematic IP
- termostat Danfoss
- termostat Delta Dore
- termostat Vaillant
- termostat Devolo
- termostat Dimplex
- termostat Baxi
- termostat SPC
- termostat Atag
- termostat Westfalia
- termostat Remko
- termostat Oregon Scientific
- termostat Elro
- termostat Netatmo
- termostat Schwaiger
- termostat Junkers
- termostat Emerson
- termostat Vemer
- termostat Busch-Jaeger
- termostat Elektrobock
- termostat Hunter
- termostat Fibaro
- termostat Salus
- termostat EQ-3
- termostat Emko
- termostat Heatmiser
- termostat Avidsen
- termostat JUNG
- termostat Carrier
- termostat H-Tronic
- termostat EVE
- termostat Elgato
- termostat Wachendorff
- termostat Sygonix
- termostat De Dietrich
- termostat Müller
- termostat Profile
- termostat Nefit
- termostat Agpo Ferroli
- termostat Amfra
- termostat Itho
- termostat Devi
- termostat Stiebel Eltron
- termostat Elco
- termostat Magnum
- termostat Horstmann
- termostat Tylö
- termostat Oventrop
- termostat King
- termostat Arnold Rak
- termostat Nest
- termostat Itho-Daalderop
- termostat Hive
- termostat Saunier Duval
- termostat Seitron
- termostat Plieger
- termostat Aube
- termostat Zehnder
- termostat Bulex
- termostat UPM
- termostat Optima
- termostat AWB
- termostat Finder
- termostat Xavax
- termostat Fantini Cosmi
- termostat Orbis
- termostat Boneco
- termostat Grasslin
- termostat Gira
- termostat Wolf
- termostat HQ
- termostat Max
- termostat Eneco
- termostat Frico
- termostat Vasco
- termostat Radson
- termostat EQ3
- termostat Go Green
- termostat Landis Gyr
- termostat Weishaupt
- termostat ICY
- termostat HomeMatic
- termostat Mikoterm
- termostat Brink
- termostat Drayton
- termostat Oertli
- termostat Heatit
- termostat 2Heat
- termostat Bryant
- termostat Watts
- termostat Etherma
- termostat Emmeti
- termostat Enda
- termostat Eurotronic
- termostat Worcester-Bosch
- termostat Econo-Heat
- termostat VDH
- termostat PECO
- termostat EasyTemp
- termostat Tru Components
- termostat Easy Timer
- termostat Z-Wave
- termostat Hugo Muller
- termostat IMIT
- termostat Innogy
- termostat Wallair
- termostat Maico
- termostat Levica
- termostat HomePilot
- termostat Ouellet
- termostat THERMAFLEX
- termostat Yokis
- termostat ChiliTec
- termostat Eliwell
- termostat Plugwise
- termostat Johnson Control
- termostat Webasto
- termostat Drayton Erie
- termostat OJ ELECTRONICS
- termostat Tellur
- termostat RWE
- termostat Lowes
- termostat Jumo
- termostat Warmup
- termostat Qubino
- termostat STI
- termostat ELKO
- termostat TrickleStar
- termostat Gewiss
- termostat Sinustec
- termostat Rose LM
- termostat Otio
- termostat MundoControl
- termostat GENERAL Life
- termostat Oreg
Najnowsze instrukcje dla termostat
14 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024