Instrukcja obsługi Siemens Euroset 5010

Siemens telefon biurowy Euroset 5010

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Siemens Euroset 5010 (15 stron) w kategorii telefon biurowy. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/15

EN / FR

Euroset 5010

1 Repertory keys

2 Recall key

3 Last number redial key

(and pause key)

4 Direct call key

5 Shift key

6 Set key

7 Mute key

1 Touches d'accès rapide

2 Touche de double appel

3 Touche bis (et touche de

pause)

4 Touche d'appel direct (ba-

by call)

5 Touche Shift

6 Touche Enregistrer

7 Touche de désactivation

du haut-parleur (Mute)

Connections

Raccordement

Cable duct for

1 table top operation

2 wall mounting

Rainure pour le cordon, utilisa-

tion

1 sur bureau

2 murale

Wall mounting

(see figure)

Once the connecting leads

have been connected, you can

mount the telephone on the

wall:

◆Drill two dowel holes

(5 mm ∅) 110mm apart,

insert dowels and screw in

countersunk head wood

screws with a slight gap to

the wall.

◆On underside of tele-

phone: Lift out handset

bracket with screwdriver.

◆Clip handset bracket into

handset shell mounting.

◆Hang telephone on pro-

jecting screw heads.

Safety precautions

When installing, connecting

and operating the telephone,

always observe the following

precautions:

◆Only use the jacks and

leads supplied.

◆Only connect the connect-

ing lead to the intended

socket.

◆Only connect approved

accessories.

◆Lay the connecting lead

where it will not cause

accidents.

◆Position the telephone on

a non-slip surface.

◆For your safety and protec-

tion, the telephone may

not be used in the bath or

shower rooms (wet loca-

tions). The telephone is

not splash proof.

◆Never expose the tele-

phone to sources of heat,

direct sunlight or other

electrical devices.

◆Protect your telephone

from moisture, dust, cor-

rosive liquids and vapours.

◆Never open up the tele-

phone yourself.

◆Do not touch the plug con-

tact with pointed or metal-

lic objects.

◆Do not carry the telephone

by the leads.

◆If you give your telephone

to someone else, make

sure you also give them

the operating manual.

Setting up the

telephone for use

Recommended

installation of telephone

◆Do not expose the tele-

phone to direct sunlight or

other sources of heat.

◆Operate at temperatures

of between +5°C and

+40°C.

◆Maintain a distance of at

least one metre between

the telephone and radio

equipment, e.g. radio tel-

ephones, radio pagers or

TV sets. Otherwise, tele-

phone communication

could be impaired.

◆Do not install the tele-

phone in dusty rooms as

this can limit the service

life of the telephone.

◆Furniture lacquer and

polish can be adversely

affected by contact with

parts of the unit (e.g.

feet).

Making calls

Dialling a number

co Lift handset, dial

number.

The redial key ; can be

used to insert pauses when

dialling, starting at the 2nd

digit.

Dialling with the repertory

keys

cLift handset. (If

necessary press

shift key = for

2nd level reper-

tory key).

:Press repertory

key.

Last number redial

The last number dialled is

automatically saved (max. 32

characters).

c; Lift handset, press

last number redial

key.

Baby call dialling

Requirement: Baby call

(direct call) is activated. The

key K lights up when the

handset is lifted.

cLift handset then

press any key

(except ? and

J).

Mute is not possible with the

baby call function.

Mute

You can deactivate the tele-

phone's handset and micro-

phone during a call. You and

the other party will then no

longer be able to hear one

another. The connection will

not be broken; this will be indi-

cated by a waiting melody,

unless you have previously

deactivated the waiting mel-

ody.

JDuring a call: Press

mute key.

Switch the hand-

set and micro-

phone back on:

Press the key

again.

Saving numbers

Various settings on the tele-

phone have to be completed

with the Set ? key.

To cancel the save or setting

operation (e.g. after an incor-

rect entry) without saving,

replace the handset instead of

pressing ?. The original

setting is then retained.

◆When saving numbers,

pauses can be inserted by

pressing ; (not at the

1st digit!).

◆When saving numbers, the

last number dialled can be

inserted at the 1st digit by

pressing ; (max. 32

digits).

◆Saving deletes the previ-

ous content of the mem-

ory

Saving repertory numbers

You can save a total of up to

20 numbers (max. 32 digits)

on the two levels of repertory

keys.

c? Lift handset, press

Set key. (For 2nd

memory level,

also press = .)

:Press the reper-

tory key under

which you want to

save the repertory

number.

oEnter the number

to be saved.

Specyfikacje produktu

Marka:	Siemens
Kategoria:	telefon biurowy
Model:	Euroset 5010

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Siemens Euroset 5010, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje telefon biurowy Siemens

Siemens Euroset 5010 Instrukcja

14 Stycznia 2025

Siemens Hicom 300E Instrukcja

4 Lipca 2024

Siemens Gigaset S2 professional Instrukcja

4 Lipca 2024

Siemens Hipath 2000 Instrukcja

4 Lipca 2024

Siemens Hipath 5000 Instrukcja

3 Lipca 2024

Siemens Gigaset T500 Pro Instrukcja

1 Lipca 2024

Siemens Gigaset 2000 Active Instrukcja

30 Czerwca 2024

Siemens Euroset 5005 Instrukcja

28 Czerwca 2024

Instrukcje telefon biurowy

Najnowsze instrukcje dla telefon biurowy

Avaya 4606 Instrukcja

13 Stycznia 2025

Avaya 9611G Instrukcja

13 Stycznia 2025

Yamaha Revolabs FLX UC 1000 Instrukcja

31 Grudnia 2025

Yamaha FLX UC 500 Instrukcja

31 Grudnia 2025

Yamaha Revolabs FLX UC 1500 Instrukcja

31 Grudnia 2025

Vimar 14557 Instrukcja

29 Grudnia 2024

Vimar 19557 Instrukcja

29 Grudnia 2024

Alcatel-Lucent 8158s WLAN Handset Instrukcja

21 Grudnia 2024

ClearOne MAX-EX Instrukcja

11 Grudnia 2024

Ooma 2602W Instrukcja

7 Października 2024