Instrukcja obsługi Shimano PD-M9000

Shimano Akcesoria rowerowe PD-M9000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Shimano PD-M9000 (1 stron) w kategorii Akcesoria rowerowe. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/1

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

High Tech Campus 92, 5656 AG Eindhoven, The Netherlands Phone: +31-402-612222

3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan

Please note: speciﬁ cations are subject to change for improvement without notice. (English)

UM-46X0A-001-00 User's manual

SPD Pedals

User's manuals in other languages are available at :

http://si.shimano.com

IMPORTANT NOTICE

•Contact the place of purchase or a bicycle dealer for information on installation and

adjustment of the products which are not found in the user's manual. A dealer's

manual for professional and experienced bicycle mechanics is available on our website

(http://si.shimano.com).

•Do not disassemble or alter this product.

For safety, be sure to read this user's manual thoroughly before use,

and follow them for correct use.

Important Safety Information

Guidelines that require replacement, contact the place of purchase or a

bicycle dealer.

WARNING TO PARENT / GUARDIAN

•USE OF THIS PRODUCT IN ACCORDANCE WITH THESE USER'S MANUALS IS ESSENTIAL

FOR YOUR CHILD'S SAFETY. MAKE SURE YOU AND YOUR CHILD UNDERSTAND THESE

USER'S MANUALS. FAILURE TO FOLLOW THESE USER'S MANUALS MAY RESULT IN

SERIOUS PERSONAL INJURY.

WARNING

•These pedals are designed so that you release them only when you intend to release.

They are not designed to release automatically at times such as when falling off the

bicycle.

•Use only SPD shoes with this product. Other types of shoes may not release from the

pedals, or may release unexpectedly.

•Use only Shimano cleats (SM-SH51 / SM-SH56) and tighten the mounting bolts securely

to the shoes.

•Before attempting to ride with these pedals and shoes, make sure you understand the

operation of the engagement / release mechanism for the pedals and cleats (shoes).

•Before you attempt to ride with these pedals and shoes, apply the brakes, then place

one foot on the ground and practice engaging and releasing each shoe from its pedal

until you can do so naturally and with minimal effort.

•Ride on level ground ﬁ rst until you become adept at engaging and releasing your

shoes from the pedals.

•Before riding, adjust the spring tension of the pedals to your liking.

If the spring tension of the pedals is low, the cleats may become accidentally released

and you may lose balance and fall off the bicycle. If the spring tension of the pedals is

high, the cleats cannot be easily released.

•When riding at low speed or when there is a possibility that you might need to stop

riding, (for example, when doing a U-turn, nearing an intersection, riding uphill or

turning a blind curve), release your shoes from the pedal beforehand so that you can

quickly put your feet onto the ground at any time.

•Use a lighter spring tension for attaching the pedal cleats when riding in adverse

conditions.

•Keep cleats and bindings clear of dirt and debris to ensure engagement and release.

•Remember to check the cleats periodically for wear. When the cleats are worn, replace

them. Always check the spring tension after replacing the pedal cleats and before

riding.

BE SURE TO READ AND FOLLOW THE ABOVE WARNINGS CAREFULLY.

If the warnings are not followed, your shoes may not come out of the pedals when

you intend or they may come out unexpectedly or accidentally, and severe injury

may result.

•Reﬂ ectors have to be mounted to the bike at any time as soon as traveling on public

roads.

•Optional reﬂ ectors are available for models that do not come equipped with reﬂ ectors

as standard. For information on suitable reﬂ ectors, contact the place of purchase or a

bicycle dealer.

•Do not continue riding the bicycle if the reﬂ ectors are dirty or damaged, otherwise it

becomes more difﬁ cult for oncoming vehicles to see you.

•After reading the user's manual carefully, keep it in a safe place for later reference.

Note

•In addition, if pedaling performance does not feel normal, check this once more.

•If you experience any trouble with the rotating parts of the pedal, the pedal may

require adjustment. Contact the place of purchase or a bicycle dealer.

•Parts are not guaranteed against natural wear or deterioration resulting from normal

use.

•For maximum performance we highly recommend Shimano lubricants and

maintenance products.

Regular inspections before riding the bicycle

Before riding the bicycle, check the following items. If any problems are found with the

following items, contact the place of purchase or a bicycle dealer.

•Are the fastening sections ﬁ xed securely?

•Is there a large play between the cleats and the pedals because of wear?

•Are there any abnormalities in the engagement and release of the cleats?

•Are there any abnormal noises?

Names of parts

Fastening

section

Binding

Cleat types and using the pedals

WARNING

Do not use the pedals and cleats in any way other than as

described in these user's manuals. The cleats are designed

to engage and release from the pedals when the cleats and

pedals are facing forward.

See below for instructions on how to install the cleats.

FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN

SERIOUS PERSONAL INJURY.

Front

Single release mode cleats (SM-SH51) and multiple release mode cleats (SM-SH56) are

available for use with these pedals.

Each type of cleat has its own distinctive features, so be sure to read the Service

Instructions carefully and select whichever type of cleat best suits your riding style

and the terrain and riding conditions which you will encounter.

Other types of cleats such as single release mode cleats (SM-SH52) and multiple

release mode cleats (SM-SH55) cannot be used, as they do not provide stable enough

step-out performance or sufﬁ cient holding force.

Engaging the cleats with the pedals

Press the cleats into the pedals with a forward

and downward motion.

Releasing the cleats from the pedals

The method of release varies according to the type of cleats you are using.

(Check the model number and color of your cleats to determine the proper method

of release.)

Single release mode cleats:

SM-SH51

(black)

Multiple release mode cleats:

SM-SH56

(silver, gold / Optional accessory)

These cleats only release when the

heel is twisted . outward

They will not release if the heel is

twisted in any other direction.

The cleats can be released by twisting

your heel in any direction.

You are able to apply upward force to

the pedal, since they will not release

unless the foot is twisted outward.

Because the cleats can also be released

by lifting your heel, they may become

accidentally released when applying

upward force on the pedals.

These cleats should not be used for

riding style which may involve pulling

up on the pedals or for activities, such

as jumping, in which pulling forces are

applied to the pedals causing possible

release from the pedals.

The cleats will not necessarily release if

you lose your balance.

Accordingly, for places and conditions

where it looks as though you may lose

balance, make sure that you have

sufﬁ cient time to release the cleats

beforehand.

Although the cleats can be released by

twisting your heels in any direction or

by lifting, they will not necessarily

release if you lose your balance.

Accordingly, for places and conditions

where it looks as though you may lose

balance, make sure that you have

sufﬁ cient time to release the cleats

beforehand.

When you are pedaling vigorously,

your heel may inadvertently twist

outward and this may cause the cleat

to release accidentally. If the cleat

releases by accident, you may fall off

the bicycle and serious injury may

result.

You can help to prevent this by

adjusting the amount of force required

to release the cleats, and you should

practice until you are accustomed to

the amount of force and the angle

required to release the cleats.

If the cleats release by accident, you

may fall off the bicycle and serious

injury may result.

If the features of multiple release

mode cleats are not sufﬁ ciently

understood and if they are not used

correctly, then they may release

accidentally with a greater frequency

than for single release mode cleats.

You can help to prevent this by

adjusting the amount of force required

to release the cleats in any direction,

and you should practice until you are

accustomed to the amount of force

and the angle required to release.

Note:

It is necessary to practice releasing until you become accustomed to the

technique.

* In multiple release mode, releasing by lifting your heel requires particular

practice.

Adjusting the spring tension of the pedals

Adjustment bolt

Decrease

Increase

2.5 mm hexagon wrench /

3 mm hexagon wrench

Adjustment plate

•The spring tension of the pedals can be adjusted by turning the adjustment bolt to

adjust the spring force of the binding.

•One click of the adjustment bolt changes one step. There are four clicks per turn.

•The adjustment bolt is located at the rear of each binding, at four positions in total of

both pedals.

•Adjust the spring force to the optimum cleat holding force when releasing the cleats

from the bindings.

•Equalize the cleat holding forces at four positions by checking the adjustment plate

position and counting the number of turns of the adjustment bolts.

•Turning the adjustment bolt clockwise increases the spring tension, and turning it

anti-clockwise reduces the spring tension.

Strongest position Weakest position

Adjustment

plate

Adjustment

bolt

If the adjustment plate is at the strongest or the weakest position, do not turn

the adjustment bolt any further.

Note:

•In order to prevent accidental or unintentional release from occurring, make sure

all the spring tensions are properly adjusted and check the spring tensions.

•If the spring tensions are not adjusted equally, it can cause the rider difﬁ culty to

engage or release from the pedals. The spring tensions should be adjusted equally

for both right and left pedals.

Replacement of the cleats and body cover

The cleats and body cover are consumables and need to be replaced periodically.

The cleats and body cover should be replaced at a dealer or an agency as soon as possible

after they become worn and difﬁ cult to release or can be released with much less effort

than that required when they were new.

Body cover

Specyfikacje produktu

Marka:	Shimano
Kategoria:	Akcesoria rowerowe
Model:	PD-M9000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Shimano PD-M9000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Akcesoria rowerowe Shimano

Shimano FD-M985 Instrukcja

8 Października 2024

Shimano FD-M8000-L Instrukcja

4 Października 2024

Shimano FD-M6020-L Instrukcja

30 Września 2024

Shimano RD-R7000-SS Instrukcja

24 Września 2024

Shimano FD-M7000-10-E Instrukcja

20 Września 2024

Shimano SL-A050-LN Instrukcja

20 Września 2024

Shimano SM-RT70 Instrukcja

16 Września 2024

Shimano ST-M4000-L Instrukcja

14 Września 2024

Shimano SM-CA70 Instrukcja

14 Września 2024

Shimano FD-M8000-H Instrukcja

13 Września 2024

Instrukcje Akcesoria rowerowe

Najnowsze instrukcje dla Akcesoria rowerowe

Crivit IAN 270384 Instrukcja

10 Października 2024

Knog Oi Luxe Instrukcja

9 Października 2024

Abus WBA65 Instrukcja

8 Października 2024

Topeak PRESSURE-RITE SHOCK ADAPTER Instrukcja

7 Października 2024

Blackburn Honest Digital Shock Instrukcja

6 Października 2024

Funn Ripper Instrukcja

5 Października 2024

Funn Mamba Instrukcja

4 Października 2024

Basil Bremen Instrukcja

2 Października 2024

Basil SoHo Instrukcja

2 Października 2024

Basil Cento Instrukcja

2 Października 2024