Instrukcja obsługi Sherwood RX-4105

Sherwood odbiornik RX-4105

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sherwood RX-4105 (47 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/47

RX-4105

 2008.7.24 12:14 PM  2

ENGLISH

1. - All the safety and operating instructions shouldRead Instructions

be read before the product is operated.

2. Retain instructions - The safety and operating instructions should

be retained for future reference.

3. Heed Warnings - All warnings on the product and in the operating

instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should be

followed.

5. Cleaning - Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

6. - Do not use attachments not recommended by theAttachments

product manufacturer as they may cause hazards.

7. - Do not use this product near water - forWater and Moisture

example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in

a wet basement, or near a swimming pool; and the like.

8. - Do not place this product on an unstable cart, stand,Accessories

tripod, bracket, or table. The product may fall, causing serious injury

to a child or adult, and serious damage to the product. Use only with

a cart, stand, tripod, bracket, or table recommended by the

manufacturer, or sold with the product. Any mounting of the product

should follow the manufacturer’s instructions, and should use a

mounting accessory recommended by the manufacturer.

9. A product and cart combination should be moved with care. Quick

stops, excessive force, and uneven surfaces may cause the product

and cart combination to overturn.

10. - Slots and openings inVentilation

the cabinet are provided for

ventilation and to ensure reliable

operation of the product and to

protect it from overheating, and

these openings must not be

blocked or covered. The openings

should never be blocked by placing

the product on a bed, sofa, rug, or other similar surface. This

product should not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

11. - This product should be operated only from thePower Sources

type of power source indicated on the marking label. If you are not

sure of the type of power supply to your home, consult your product

dealer or local power company. For products intended to operate

from battery power, or other sources, refer to the operating

instructions.

12. - This product may be equipped with aGrounding or Polarization

polarized alternating-current line plug (a plug having one blade

wider than the other). This plug will fit into the power outlet only one

way. This is a safety feature. If you are unable to insert the plug

fully into the outlet, try reversing the plug. If the plug should still fail

to fit, contact your electrician to replae your obsolete outlet. Do not

defeat the safety purpose of the polarized plug.

Alternate Warnings - This product is equipped with a three-wire

grounding-type plug, a plug having a third(grounding) pin. This plug

will only fit into a grounding-type power outlet. this is a safety

feature. If you are unable to insert the plug into the outlet, contact

your electrician to replace your obsolete outlet. Do not defeat the

safety purpose of the gronding-type plug.

13. - Power-supply cords should be routed soPower-Cord Protection

that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit from the

product.

14. - If an outside antenna or cableOutdoor Antenna Grounding

system is connected to the product, be sure the antenna or cable

system is grounded so as to provide some protection against

voltage surges and built-up static charges. Article 810 of the

National Electrical Code, ANSI/NFPA 70, provides information with

regard to proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna-discharge unit,

connection to grounding electrodes, and requirements for the

grounding electrode. See Figure 1.

15. - For added protection for this product during a lightningLightning

storm, or when it is left unattended and unused for long periods of

time, unplug it from the wall outlet and disconnect the antenna or

cable system. This will prevent damage to the product due to

lightning and power-line surges.

16. Power Lines - An outside antenna system should not be located in

the vicinity of overhead power lines or other electric light or power

circuits, or where it can fall into such power lines or circuits. When

installing an outside antenna system, extreme care should be taken

to keep from touching such power lines or circuits as contact with

them might be fatal.

17. Overloading - Do not overload wall outlets, extension cords, or

integral convenience receptacles as this can result in a risk of fire

or electric shock.

18. Object and Liquid Entry - Never push objects of any kind into this

product through openings as they may touch dangerous voltage

points or short-out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the product.

19. Servicing - Do not attempt to service this product yourself as

opening or removing covers may expose you to dangerous voltage

or other hazards. Refer all servicing to qualified service personnel.

20. - Unplug this product form the wallDamage Requiring Service

outlet and refer servicing to qualified service personnel under the

following conditions:

a) When the power-supply cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the

product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the product to its normal operation.

e) If the product has been dropped or damaged in any way, and

f) When the product exhibits a distinct change in performance -

this indicates a need for service.

21. - When replacement parts are required, beReplacement Parts

sure the service technician has used replacement parts specified

by the manufacturer or have the same characteristics as the

original part. Unauthorized substitutions may result in fire, electric

shock, or other hazards.

22. Safety Check - Upon completion of any service or repairs to this

product, ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

23. - The product should be mounted to aWall or Ceiling Mounting

wall or ceiling only as recommended by the manufacturer.

24. Heat - The product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products

(including amplifiers) that produce heat.

PORTABLE CART WARNING

SAFETY INSTRUCTIONS

RX-4105-VE_080703 2008.7.24 12:16 PM  2

ENGLISH

CAUTION

FOR YOUR SAFETY

: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Introduction

READ THIS BEFORE OPERATING YOUR UNIT

This symbol is intended to alert the user to the presence

of uninsulated "dangerous voltage" within the product's

enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence

of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

Caution regarding installation

Note : For heat dispersal, do not install this unit in a confined space such as a bookcase or similar enclosure.

: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

CAUTION

WARNING

Units shipped to the U.S.A and CANADA are designed for operation on 120 V AC only.

Safety precaution with use of a polarized AC plug.

However, some products may be supplied with a nonpolarized plug.

U.S.A

CANADA

120 V

• Leave a space around the unit for sufficient ventilation.

• Avoid installation in extremely hot or cold locations, or in an area that is exposed to direct sunlight or heating equipment.

• Keep the unit free from moisture, water, and dust.

• Do not let foreign objects in the unit.

• The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

• No naked flame sources, such as lighted candles, should be placed on the unit.

• Please be care the environmental aspects of battery disposal.

• The unit shall not be exposed to dripping or splashing for use.

• No objects filled with liquids, such as vases, shall be placed on the unit.

• Do not let insecticides, benzene, and thinner come in contact with the set.

• Never disassemble or modify the unit in any way.

■Notes on the AC power cord and the wall outlet.

• The unit is not disconnected from the AC power source(mains) as long as it is connected to the wall outlet, even if the unit has been turned off.

• When disconnecting the power cord from the wall outlet, always pull the plug, not the power cord.

• Disconnect the plug from the wall outlet when not using the unit for long periods of time.

• The wall outlet shall be installed near the unit and shall be easily accessible.

Do not block ventilation openings or stack other equipment on the top.

: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

: Pour éviter chocs électriques, introduire la lame la plus large de la fiche dans la borne

correspondante de la prise et pousser jusqu’ au fond.

CAUTION

ATTENTION

Note to CATV System Installer :

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper

grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point

of cable entry as practical.

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

RX-4105-VE_080703 2008.7.24 12:16 PM  3

Specyfikacje produktu

Marka:	Sherwood
Kategoria:	odbiornik
Model:	RX-4105

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sherwood RX-4105, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje odbiornik Sherwood

Sherwood NetBoxx R-904N Instrukcja

1 Października 2024

Sherwood AX-5505 Instrukcja

1 Października 2024

Sherwood RD-705i Instrukcja

1 Października 2024

Sherwood R-507 Instrukcja

1 Października 2024

Sherwood RX-4508 Instrukcja

1 Października 2024

Sherwood RD-7505 Instrukcja

1 Października 2024

Sherwood BT-R7 Instrukcja

23 Września 2024

Sherwood RD-8601 Instrukcja

23 Września 2024

Sherwood RD-6500 Instrukcja

22 Września 2024

Sherwood RX-4105 Instrukcja

17 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon AVR-S900W Instrukcja

15 Października 2024

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024

AKG HP12U Instrukcja

15 Października 2024

Apart SBR160 Instrukcja

14 Października 2024

American Audio VLP 600 Instrukcja

14 Października 2024

Chord Anni Instrukcja

14 Października 2024

Sennheiser EM 9046 SU Instrukcja

14 Października 2024

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024

JL Audio VX600/6i Instrukcja

12 Października 2024

Pioneer SX-303RDS Instrukcja

10 Października 2024