Instrukcja obsługi Shelly 1L

Shelly przełącznik 1L

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Shelly 1L (2 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

UNIVERSAL WIFI SENSOR INPUT

USER GUIDE

BYPASS

OLNSxSxSW2SW1

LEGEND*

N - Neutral Input

L - Line input (110-240V)

O - Output

SW1 - Switch 1

SW2 - Switch 2

SX - signal for Switch

* When using the device without neutral, Shelly 1L re-

quires at least 20W of power consumption, in order to

operate. If the connected light has a smaller power con-

sumption, then Shelly Bypass is required for the opera-

tion of the Device! Shelly Bypass is accessory that will

be sold separatley!

The WiFi Relay Switch Shelly 1L can control 1 electrical

circuit up to 1кW load. It is intended to be mounted into a

standard in-wall console, behind power sockets and light

switches or other places with limited space. Shelly may

work as a standalone Device or as an accessory to anoth-

er home automation controller.

• Purpose of control: Operating

• Construction of control: Independently mounted

• Type 1.B Action

• Pollution Degree 2

• Impulse Voltage: 4000 V

SPECIFICATION

Power supply: 110-230V ±10% 50/60Hz AC

Max load

• 4,1A/230V

• 4,1A/110V

Max current for short operation

• 1200W/230V

• 600W/110V

Supported load type (with and without neutral):

• Resistive - for example lights, electric heaters, etc.

• Inductive for example LED lights, transformers, fans,

motors, etc.

• Capacitive for example motor starting capacitors, gen-

erators, synchronous motors, etc.

Supported light types:

• Incandescent lamps

• Fluorescent lamps

• Halogen lamps

• Dimmable LED

• Non Dimmable LED

• Fluorescent tubes

• Neon lamps

Protection: Overheating

Complies with:

• RE Directive 2014/53/EU

• LVD 2014/35/EU

• EMC 2004/108/WE

• RoHS2 2011/65/UE

Working temperature: – 20°C up to 40°C

Radio signal power: 1mW

Radio protocol: WiFi 802.11 b/g/n

Frequency: 2400 – 2500 MHz

Operational range (depending on local construction)

• up to 50 m outdoors

• up to 30 m indoors

Dimensions (HxWxL): 41 x 36 x 17 mm

Electrical consumption: < 1 W

TECHNICAL INFORMATION

• -Control through WiFi from a mobile phone, PC, auto

mation system or any other Device supporting HTTP

and/or UDP protocol.

• Microprocessor management.

• Controlled elements: 1 electrical circuits/appliances.

• Controlling elements: 1 relays.

• Shelly may be controlled by an external button/switch.

CAUTION! Danger of electrocution. Mounting the Device

to the power grid has to be performed with caution.

CAUTION! Do not allow children to play with the but-

ton/switch connected the Device. Keep the Devices for

remote control of Shelly (mobile phones, tablets, PCs)

away from children.

Introduction to Shelly®

Shelly® is a family of innovative Devices, which allow

remote control of electric appliances through mobile

phone, PC or home automation system. Shelly® uses

WiFi to connect to the devices controlling it. They can be

in the same WiFi network or they can use remote access

(through the Internet). Shelly® may work standalone,

without being managed by a home automation control-

ler, in the local WiFi network, as well as through a cloud

service, from everywhere the User has Internet access.

Shelly® has an integrated web server, through which the

User may adjust, control and monitor the Device. Shelly®

has two WiFi modes - access Point (AP) and Client mode

(CM). To operate in Client Mode, a WiFi router must be lo-

cated within the range of the Device. Shelly® devices can

communicate directly with other WiFi devices through

HTTP protocol.

An API can be provided by the Manufacturer. Shelly® de-

vices may be available for monitor and control even if the

User is outside the range of the local WiFi network, as

long as the WiFi router is connected to the Internet. The

cloud function could be used, which is activated through

the web server of the Device or through the settings in the

Shelly Cloud mobile application.

The User can register and access Shelly Cloud, using ei-

ther Android or iOS mobile applications, or any internet

browser and the web site: https://my.shelly.cloud/.

Installation Instructions

CAUTION! Danger of electrocution. The mounting/instal-

lation of the Device should be done by a qualied person

(electrician).

CAUTION! Danger of electrocution. Even when the De-

vice is turned off, it is possible to have voltage across

its clamps. Every change in the connection of the clamps

has to be done after ensuring all local power is powered

off/disconnected.

CAUTION! Do not connect the Device to appliances ex-

ceeding the given max load!

CAUTION! Connect the Device only in the way shown in

these instructions. Any other method could cause dam-

age and/or injury.

CAUTION! Before beginning the installation please read

the accompanying documentation carefully and com-

pletely. Failure to follow recommended procedures could

lead to malfunction, danger to your life or violation of the

law. Allterco Robotics is not responsible for any loss or

damage in case of incorrect installation or operation of

this Device.

CAUTION! Use the Device only with power grid and appli-

ances which comply with all applicable regulations. short

circuit in the power grid or any appliance connected to

the Device may damage the Device.

RECOMMENDATION! Тhe Device may be connected to

and may control electric circuits and appliances only if

they comply with the respective standards and safety

norms.

RECOMMENDATION! The Device may be connected with

solid single-core cables with increased heat resistance to

insulation not less than PVC T105°C.

Initial Inclusion

Before installing/mounting the Device ensure that the

grid is powered off (turned down breakers).

1. Connecting to the power grid without neutral 110-240

g.1 bypass is optional

2. Connecting to the power grid with neutral 110-240

g.2

For more information about the Device, please visit:

http://shelly-api-docs.shelly.cloud/#shelly-family-overview

or contact us at: developers@shelly.cloud

You may choose if you want to use Shelly with the Shelly

Cloud mobile application and Shelly Cloud service. You can

also familiarize yourself with the instructions for Manage-

ment and Control through the embedded Web interface.

Control your home with your voice

All Shelly devices are compatible with Amazon Echo and

Google Home. For more information see:

https://shelly.cloud/compatibility/Alexa

https://shelly.cloud/compatibility/Assistant

Application for Shelly devices management

Shelly Cloud gives you opportunity to control and adjust

all Shelly® Devices from anywhere in the world.

You only need an internet connection and our mobile ap-

plication, installed on your smartphone or tablet.

To install the application please scan the QR code below

or search for “Shelly cloud“ in your app store.

Registration

The rst time you load the Shelly Cloud mobile app, you

have to create an account which can manage all your

Shelly® devices.

Forgotten Password

In case you forget or lose your password, just enter the

e-mail address you have used in your registration. You

will then receive instructions to change your password.

WARNING! Be careful when you type your e-mail address

during the registration, as it will be used in case you for-

get your password.

First steps

After registering, create your rst room (or rooms), where

you are going to add and use your Shelly devices.

Shelly Cloud gives you opportunity to create scenes for

automatic turning on or off of the Devices at predened

hours or based on other parameters like temperature, hu-

midity, light etc. (with available sensor in Shelly Cloud).

Shelly Cloud allows easy control and monitoring using a

mobile phone, tablet or PC.

Device Inclusion

To add a new Shelly device, install it to the power grid

following the Installation Instructions included with the

Device.

Step 1

After the installation of Shelly following the Instalation

Instructions and the power is turned on, Shelly will create

its own WiFi Access Point (AP).

WARNING! In case the Device has not created its own

WiFi network with SSID like shelly1L-35FA58 check if

you have connected Shelly correctly by the schemes

described above. If you do not see an active WiFi net-

work with SSID like shelly1L-35FA58, reset the Device.

If the Device has been powered on, you have to restart

by powering it off and on again. After turning the power

on, you have one minute to press 5 consecutive times

the button/switch connected to either input (SW1/SW2).

You have to hear the Relay trigger itself. After the trig-

ger sound, Shelly should return to AP Mode. If you have

physicall access to the device, you can press and hold

the Reset button for 10 second, which is placed on the

back of the device. Shelly should return to AP Mode. If

not, please repeat or contact our customer support at:

support@shelly.cloud

Step 2

Choose “Add Device”.

In order to add more Devices later, use the app menu at

the top right corner of the main screen and click “Add De-

vice”. Type the name (SSID) and password for the WiFi

network, to which you want to add the Device.

Step 3

• If using iOS press the home button of your iPhone/

iPad/iPod. Open Settings > WiFi and connect to the WiFi

network created by Shelly, e.g. shelly1L-35FA58.

• If using Android your phone/tablet will automatically

scan and include all new Shelly Devices in the WiFi net-

work that you are connected to.

Upon successful Device Inclusion to the WiFi network

you will see the following pop-up:

Step 4

Approximately 30 seconds after discovery of any new

Devices оn the local WiFi network, а list will be displayed

by default in the “Discovered Devices” room.

Step 5

Enter Discovered Devices and choose the Device you

want to include in your account.

Step 6

Enter a name for the Device (in the Device Name eld).

Choose a Room, in which the Device has to be posi-

tioned. You can choose an icon or add a picture to make

it easier to recognize. Press “Save Device”.

Step 7

To enable connection to the Shelly Cloud service for re-

mote control and monitoring of the Device, press “YES”

on the following pop-up.

Wiring without neutral

Wiring with neutral

Shelly devices settings

After your Shelly device is included in the application, you

can control it, change its settings and automate the way

it works.

To switch the Device on and off, use the respective ON/

OFF button.

To enter at the details menu of the respective Device,

simply click on it’s name.

From the details menu you may control the Device, as

well as edit its appearance and settings.

Edit device

Аllows you to change the Device’s name, room and picture.

Device settings

Allows you to change settings. For example, with Restrict

access to the embedded web interface in Shelly. You may

automate the Device operations from this menu as well.

Timer

Тo manage the power supply automatically, you may use:

• Auto OFF - After turning on, the power supply will auto-

matically shutdown after a predened time (in seconds).

A value of 0 will cancel the automatic shutdown.

• Auto On - After turning off, the power supply will be

automatically turned on after a predened time (in sec-

onds). A value of 0 will cancel the automatic power-on.

Weekly schedule

This function requires an Internet connection. To use In-

ternet, a Shelly Device has to be connected to a local WiFi

network with working internet connection.

Shelly may turn on/off automatically at a predened time

and day throughout the week. You may add unlimited

number of weekly schedules.

Sunrise/Sunset

This function requires an Internet connection. To use In-

ternet, a Shelly Device has to be connected to a local WiFi

network with а working Internet connection.

Shelly receives actual information through the Internet

about the time of sunrise and sunset in your area. Shelly

may turn on or off automatically at sunrise/sunset, or at a

specied time before or after sunrise/sunset.

Settings

All the settings are well explained in THE EMBEDDED

WEB INTERFACE section of this user guide.

Firmware update

Shows present rmware version. If a newer version is

available, you can update your Shelly Device by clicking

Update.

Factory reset

Remove Shelly from your account and return it to its fac-

tory settings.

Device information

Here you can see the unique ID of Shelly and the IP it got

from the Wi-Fi network.

THE EMBEDDED WEB INTERFACE

Еven without the mobile app, Shelly can be set and con-

trolled through a browser and WiFi connection of a mo-

bile phone, tablet or PC.

Abbreviations used

• Shelly-ID – the unique name of the Device. It consists

of 6 or more characters. It may include numbers and let-

ters, for example 35FA58.

• SSID – the name of the WiFi network, created by the

Device, for example shelly1L-35FA58.

• Access Point – the mode in which the Device cre(AP) -

ates its own WiFi connection point with the respective

name (SSID).

• Client Mode – the mode in which the Device is (CM)

connected to another WiFi network.

Initial inclusion

Step 1

Install Shelly to the power grid following the schemes de-

scribed above and place it into the console. After turning

the power on Shelly will create its own WiFi network (AP).

WARNING! In case the Device has not created its own

WiFi network with SSID like shelly1L-35FA58 check if

you have connected Shelly correctly by the schemes

described above. If you do not see an active WiFi net-

work with SSID like shelly1L-35FA58, reset the Device.

If the Device has been powered on, you have to restart

by powering it off and on again. After turning the power

on, you have one minute to press 5 consecutive times

the button/switch connected to either input (SW1/SW2).

You have to hear the Relay trigger itself. After the trig-

ger sound, Shelly should return to AP Mode. If you have

physicall access to the device, you can press and hold

the Reset button for 10 second, which is placed on the

back of the device. Shelly should return to AP Mode. If

not, please repeat or contact our customer support at:

support@shelly.cloud

Step 2

When Shelly has created an own WiFi network (own AP),

with name (SSID) such as shelly1L-35FA58. Connect to it

with your phone, tablet or PC.

Step 3

Type 192.168.33.1 into the address eld of your browser

to load the web interface of Shelly.

General - Home Page

This is the home page of the embedded web interface.

If it has been set up is correctly, you will see information

about:

• Settings menu button

• Current state (on/off)

• Present time

Settings – General Settings

In this menu, you can congure the Shelly device’s work

and connection modes.

WiFi Settings

The WiFi connection settings:

• Access Point (AP) Mode - allows the Device to operate

as a WiFi access point. The User can change the name

(SSID) and the password to access the AP. After you have

entered the desired settings, press Connect.

• WiFi Client Mode - allows the Device to connect (CM)

to an available WiFi network. In order to switch to this

mode, the User must enter the name (SSID) and the pass-

word to connect to a local WiFi network. After entering

the correct details, press Connect.

ATTENTION! If you have entered incorrect information

(wrong settings, usernames, passwords etc.), you will

not be able to connect to Shelly and you have to reset the

Device as explained in Step 1.

Access to the Device

Leave unprotected

removing the notication for disabled authorization.

Enable authentication

You can turn authentication on or off

Password and username

This is where you can change your username and pass-

word. You must enter a new username and the new pass-

word, then press Save to save the changes.

Connect to cloud

you can turn the connection between Shelly and Shelly

Cloud on or off.

Factory reset

Return Shelly to its factory settings.

Firmware update

Shows present rmware version. If a newer version is

available, you can update your Shelly Device by clicking

Update.

Device reboot

Reboots the device.

Relay mode

Relay Screen

In this screen you can control, monitor and change the

settings for turning the power on and off. You can also

see the current status of the connected appliance to

Shelly, Buttons Settings, On and OFF.

To control your Shelly:

1. Press Relay

• To turn on the connected circuit press “Turn ON”.

• To turn off the connected circuit press “Turn OFF”

2. Press the icon to go to the previous menu.>

Shelly Management Settings

Each Shelly can be congured individually. This lets you

personalize each Device in a unique manner, or consis-

tently, as you choose.

Power On Default State

This sets the relays’ default state when powered from

the power grid.

• ON - By default when the Device is powered and the

connected circuit/appliance to it will be powered as well.

• OFF - By default the Device and any connected circuit/

appliance will not be powered, even when it is connected

to the grid.

• Restore last state - By default the Device and the

connected circuit/appliance will be returned to the last

state they occupied (on or off) before the last power off/

shutdown.

Auto ON/OFF

Automatic powering/shutdown of the socket and the

connected appliance:

• Auto after: After turning on, the power supply will OFF

be automatically shut down after a predened time (in

seconds). A value of 0 will cancel the automatic shut-

down.

• Auto after: After turning off, the power supply will ON

be automatically turned on after a predened time (in

seconds). A value of 0 will cancel the automatic start.

Manual Switch Type

• One button mode - relay is controlled with button 1 -

(momentary)

• Dual button mode - relay is controlled with button 1 for

On and 2 for Off (momentary)

• Toggle switch one button - relay is controlled with

switch 1

• Toggle Dual switch mode - relay is controlled with but-

ton 1 for On and 2 for Off

• Edge switch - relay is controlled with switch 1

• Edge Dual switch mode - relay is controlled with button

1 for On and 2 for Off

• Activation Switch - use it for motion sensor connected

to swith 1. Any input turns “ON” and resets Auto OFF timer.

• Detached Switch 1- switch doesn’t control dimmer

output.

Actions supported from Shelly1L

When the button is switched ON or OFF and When

the output is ON or OFF. The difference is that button

means physical action (push with hand), the relay can

be switched ON/OFF from scene, Schedule, Application

Different type of devices can support different actions.

You must activate the required option and enter the URL

that is being executed. Detailed description about what

commands are possible between Shelly device can be

found here https://shelly-api-docs.shelly.cloud/

Sunrise/Sunset hours

This function requires an Internet connection. To use In-

ternet, a Shelly Device has to be connected to a local WiFi

network with а working Internet connection.

Shelly receives actual information through the Internet

about the time of sunrise and sunset in your area. Shelly

may turn on or off automatically at sunrise/sunset, or at a

specied time before or after sunrise/sunset.

On/Off schedule

This function requires an Internet connection. To use In-

ternet, a Shelly Device has to be connected to a local WiFi

network with working internet connection. Shelly may

turn on/off automatically at a predened time.

Shelly may turn on/off automatically at a predened

time.

Hereby, Allterco Robotics EOOD declares that the radio

equipment type Shelly 1L is in compliance with Directive

2014/53/EU, 2014/35/EU, 2004/108/WE, 2011/65/UE.

The full text of the EU declaration of conformity is avail-

able at the following internet address:

https://shelly.cloud/declaration-of-conformity/

Manufacturer: Allterco Robotics EOOD

Address: Soa, 1407, 103 Cherni vrah Blvd.

Tel.: +359 2 988 7435

E-mail: support@shelly.cloud

Web: http://www.shelly.cloud

Updates in the contact data are published by the Manu-

facturer at the ocial website of the Device

http://www.shelly.cloud

The User is obliged to stay informed for any amendments

of these warranty terms before exercising his/her rights

against the Manufacturer.

All rights to trademarks She® and Shelly® , and other

intellectual rights associated with this Device belong to

Allterco Robotics EOOD.

Specyfikacje produktu

Marka:	Shelly
Kategoria:	przełącznik
Model:	1L

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Shelly 1L, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje przełącznik Shelly

Shelly 1PM Instrukcja

23 Września 2024

Shelly Pro 4PM Instrukcja

23 Września 2024

Shelly 1L Instrukcja

23 Września 2024

Shelly Plus 1PM Instrukcja

23 Września 2024

Shelly Pro 2 Instrukcja

23 Września 2024

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik

Netgear GS110TPP Instrukcja

15 Października 2024

ZyXEL SFP-LHX1310-40-D Instrukcja

14 Października 2024

Tripp Lite B005-DPUA4 Instrukcja

11 Października 2024

Lancom CS-8132F Instrukcja

9 Października 2024

Lancom YS-7154CF Instrukcja

9 Października 2024

TP-Link Festa FS328G Instrukcja

9 Października 2024

Totolink SW24DM Instrukcja

9 Października 2024

Totolink SW1008P Instrukcja

9 Października 2024

Totolink SW24G2 Instrukcja

9 Października 2024

Cudy FS1006P Instrukcja

9 Października 2024