Instrukcja obsługi Sharper Image Surround Sound Shower System (Set of 2)

Sharper Image Niesklasyfikowane Surround Sound Shower System (Set of 2)

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sharper Image Surround Sound Shower System (Set of 2) (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
Thank you for purchasing the Surround Sound Shower System
(Set of 2). Please take a moment to read this guide and store it
for future reference.
User de Gui
Surround Sound Shower System (Set of 2)
Item No. 206890
size: 240*150mm 三折页
-2-
KEY FUNCTION
1.
Hold the power button for 3 seconds to switch speaker
on and off.
2.
Short press for multi-color LED light:
Rotate colors
Select color
No color/light
Long press to play the previous song
Short press to turn down the volume
Long press to play the next song
Short press to turn up the volume
1.
Press to play or pause music or FM radio
2.
Bluetooth mode: Long press the host speaker to connect
or cut off the connections of two speakers.
3.
FM radio: Press and hold to search automatically
4.
Press to answer or end phone call
5. Press and hold to reject incoming calls
6. Double press to redial
1.
Short press to switch between wireless and FM radio
2.
Long press the host speaker to cut off or reconnect the wireless
connection with the device.
FEATURES
Wireless 5.0
Waterproof IP grade: IP67
Hands-free talking
Strong suction cup
FM radio
Multi-color LED light
Charges via USB
-3-
SPECIFICATIONS
Frequency Range: 100Hz-20KHz
Operating Distance: 10 meters
Microphone: Built in
Power Rating: 5W
SNR: ≥85+2 dB
Charging Voltage: DC 5V
Battery Capacity: 650mAh
Charge Time: Approx. 4 hours
Playback Time: Approx. 8 hours
Housing Material: ABS + Silicone
WIRELESS PAIRING
Charge the speaker for 3 full hours prior to initial use.
1. Make sure that the speaker is powered off. Place your mobile
phone or media player devicenext to it. Press and hold the
power button for 3 seconds toenter pairing mode. If Bluetooth
disconnects, the speaker will shut down automatically after
10 minutes.
2.
Activate the wireless feature on your media player device
and search the list for“SI AUDIO.” Enter “0000” if prompted
for a password.
3.
If pairing fails, refer to your media player device’s user manual.
Remove paired devices from the list and start over at step 1.
TWS CONNECTION
Follow these instructions when first using the TWS function:
1. Turn on one of the speakers and pair your device to the host
speaker.
2. Turn on the second speaker in Bluetooth mode.
3. In Bluetooth mode, press and hold on the host speaker.
Stop pressing after you hear the connection sound.
IN TWS MODE
You can control volume, change previous song/next song,
play/pause, power off, etc.
from either of the two speakers. Press and hold to cut off
the TWS connection between them.
NOTE: TWS only works with Bluetooth
1. In FM mode, two speakers can’t be used as TWS. FM radio
functions individually.
2. When answering an incoming call, the caller’s voice can only
be heard through the host speaker.
-4-
RECHARGING
The wireless speaker is powered by a built-in rechargeable
lithium battery. To charge:
1. Release the DC 5V charging port cover.
2. Connect the USB charging cable to a standard USB
charging port.
PACKAGE CONTENTS
BT Shower Speakers
USB Charging Cable
Dedicated Suction Cup
PRODUCT FEATURE
TROUBLESHOOTING
-6 -
SAFETY INSTRUCTIONS
1. Please make sure the plug cover is tight before you place
the device around water.
2. Keep the device away from extreme weather to prevent
electric shock, explosion or bodily injury.
3. Do not use the device in or around excessive heat: Direct
sunlight, near stovetops or open flames, etc.
4. Keep device out of the reach of children. Do not operate
at excessive volume levels as this may damage hearing.
5. Clean the product with a soft cloth free of harsh or
corrosive chemicals. Always unplug from the power
source before cleaning.
6. Do not puncture or disassemble the exterior surface of
the device in any way.
7. Do not insert metal objects into the device as this could
cause electrical shock.
FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Note:This equipment has been tested and found to complywith
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
toradio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
-Consult the dealer or an experienced radio/TV technician
for help.
WARRANTY / CUSTOMER SERVICE
This item from SharperImage.com includes a 1-year limited
replacement warranty. If you have any questions not covered
in this guide, please call our Customer Service department at 1
(877) 210-3449. Customer Service agents are available
Monday through Friday, 9:00 a.m. to 6:00 p.m. ET.
-1-
Symptoms
Speaker Can’t be powered on
Not able to pair with the speaker
Volume too low
Causes
Low battery level
Speaker is already on or
not in pairing mode. Refer to “Wireless
pairing section”
Recharge the battery
Battery is not charged up
or volumeis not set the
max on both the speaker
and media player.
1.Increase the volume by
pressing and holding the
volume up button.
2.Increase the volume
on your media player.
Solutions
FM Radio Signals
1. To receive optimal FM radio signals, relocate your
speakers to an open environment. Move it away from
other electronic devices to reduce the interference.
2. If applicable, use an external antenna to possibly
increase the signal strength.
Press to switch between Bluetooth and FM
radio. If TWS is available, long press to pair
or cut off the connection between the two
speakers
Press to play or pause
music or FM radio
In Bluetooth mode, press
andhold to connect or cut
off TWS
In FM radio mode, press and
hold to search/save radio
channels
Press to answer or end
phone calls
Press and hold to reject
incomingcalls
Double press to redial the
lastnumber called
Long press to play previous
song
Short press to turn down
the volume
Built-in microphone for
phonecalls
Power On/Off:
Hold the power button for 3 seconds to switch speaker on or off
Short press to select one color, switch between colors, or turn off
the multi-color LED light
Long press to play
the next song
Short press to turn
up the volume
-5-
Shockproof, Scratchproof,
Dustproof and Waterproof
case
Strong suction cup
Colorful LED light
Red indicator light will
turn off once the device is
fully charged
Micro USB
DV 5V charging port


Specyfikacje produktu

Marka: Sharper Image
Kategoria: Niesklasyfikowane
Model: Surround Sound Shower System (Set of 2)

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sharper Image Surround Sound Shower System (Set of 2), zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Sharper Image

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane