Instrukcja obsługi Seymour Duncan 805 Overdrive

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Seymour Duncan 805 Overdrive (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
- 8 0 5 -
O v e r d r i v e P e d a l
U S e r S G U i d e
Congratulations, and thank you for your purchase of the Seymour Duncan 805 Overdrive™ Pedal!
The 805 is a very transparent, classic Overdrive pedal designed using the legendary 808 chip as a
starting point but with an expanded gain range and 3-band active EQ that is not commonly found
in 808 style overdrive pedals.
The gain range extends from 8dB to 36dB, allowing for a wide range of overdrive options from
mild boost to saturated lead gain . The active EQ circuit is designed to allow players full access to
be able to fine-tune all elements of the low, mid and high frequency content.
Typical applications for the 805 Overdrive include:
• Use for frequency contouring. Set up a frequency response that works well for
saturated overdrive sounds.
• Use to boost level into single channel or clean amps to push them into overdrive and
create essentially two channels.
• Use the pedal’s own smooth distortion to create a rich, saturated tone even at lower
volume levels, with amps that don’t have separate gain and master knobs.
H O W I T W O R K S
1 Level - Sets the overall level of your signal. W
the wide gain range available you can dial in th
based on how much crunch you dial in with the
knob. The cleaner (lower) the gain, the higher t
should be and vice versa.
2 Drive - Regulates the amount of gain the 80
Overdrive is putting out. Low settings will provi
very slightly overdriven, boosted tone. Increasin
Drive pushes the front end of your amp harder,
depending on the output of your pickups will st
add some rich distortion anywhere from 9 o’clo
higher-output humbuckers, to 11-12o’clock for th
output, more vintage type pickups. Gain range
805 Overdrive is a versatile 8dB to 36dB provid
wide, flexible tonal palette.
3 Bass - Active control provides +/- 11dB of bo
cut at 90hz. Turn clockwise for thunderous low
to fatten up an open-back cabinet, counter-clo
to clean up closed-back cabinets that may be t
bass-heavy for the venue or style of music.
4 Mid - Active +/-11dB of boost or cut at 750h
From 12 o’clock, turn clockwise to boost the
mids for more presence, counter-clockwise
to cut the mids for a more scooped tone.
1
3
2
5
7
8 9
4
11
(on back panel)
6
10

Specyfikacje produktu

Marka: Seymour Duncan
Kategoria: Niesklasyfikowane
Model: 805 Overdrive

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Seymour Duncan 805 Overdrive, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Seymour Duncan

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024