Instrukcja obsługi SetonixSynth Noise Complaint!

SetonixSynth Niesklasyfikowane Noise Complaint!

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SetonixSynth Noise Complaint! (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
Noise Complaint! Quad Normalized Attenuator - User’s Manual for Eurorack
Copyright 2022 SetonixSynth. All rights reserved.
Hello and thank you for using the Noise Complaint! Quad Normalized Attenuator for Eurorack modular.
We hope you will find it to be good for attenuating stuff!
Technical Specifications (Intellijel 1U)
Width: 22 hp
Depth: 25 mm
Peak Current Draw: 0 mA (Passive)
1. Installing the Noise Complaint!
The Noise Complaint! consumes no power and as such does not need to be plugged into your case’s
power busboard. The module will fit in any 1U case. Simply place it in the case andIntellijel-format
mount it using either two diagonal rack screws or screws in each of the four corner holes.
2. Theory of Operation
The Noise Complaint! is a very simple module containing four passive attenuator channels. Because this
is a passive module, it is only capable of turning signals down, never of amplifying. It’s also worth noting
that this module , though it can be used as the opposite (in other words, ancan’t be used as a mixer
attenuating Multiple - see “Patch Ideas” section).
Most Eurorack output signals are relatively hot, or high-amplitude, making it a common problem that they
need “reining in” in order to most effectively modulate or control parameters which benefit from nuance,
such as filter cutoff, FM amount, envelope time, and similar. As such, the Noise Complaint! is designed
simply to provide some solid, performance-friendly knobs and switches for precisely dialing in signals.
Please note: The Noise Complaint! is an entirely passive module and will accept and output any voltage
and current up to the breaking point of its hardware, without limiting or conditioning it in any way apart
from acting as a voltage divider depending on the position of the corresponding knob. As such, it should
not be used to process signals outside the power rail voltages of any synthesizer to which it is patched as
this could potentially damage an active circuit.
3. Summary of Functions
Level A-D :(knobs) Controls the level of the corresponding input channel.
Mute A-C: Interrupts the Input of the corresponding channel and pulls the Output to 0 volts. Does not
affect the Normalization of one input channel to the next.
In A-D: Input to each Attenuator channel. If IN D is left unpatched, its jack will be normalized to IN C. IN C
is normalized to IN B, and IN B is normalized to IN A. Therefore, if only IN A is patched, this input signal
will be routed to IN B, C, and D as well.
Out A-D: Channel Outputs post-Attenuation and Mute, if applicable.
4. Patch Ideas
“Attenuating Multiple”
Patch a signal to IN A. If IN B-D are left unpatched, LEVEL B-D and MUTE B-C can be used to provide a
different level output of the signal present at IN A. The Normalization to any channel can be broken by
patching a signal to the corresponding IN, allowing for the creation of two separate two-channel
Attenuating Multiples for example.
"Meta Controller"
Patch a signal to IN A, then patch OUT A to IN B. Patch OUTs B-D to sensitive parameters in your patch
and adjust LEVELs B-D to control the “window size” of each parameter to be modulated. When LEVEL A
is adjusted, it will provide overall level control for each of the other Channel OUTs, and MUTE A can be
used to mute all other Channels.

Specyfikacje produktu

Marka: SetonixSynth
Kategoria: Niesklasyfikowane
Model: Noise Complaint!

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SetonixSynth Noise Complaint!, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane SetonixSynth

SetonixSynth

SetonixSynth Boing! Instrukcja

22 Września 2024
SetonixSynth

SetonixSynth Tidbit Audio Instrukcja

21 Września 2024
SetonixSynth

SetonixSynth Marsupial Instrukcja

21 Września 2024
SetonixSynth

SetonixSynth Solar Gravity Instrukcja

21 Września 2024
SetonixSynth

SetonixSynth Macropod Instrukcja

20 Września 2024
SetonixSynth

SetonixSynth Noise Complaint! Instrukcja

18 Września 2024
SetonixSynth

SetonixSynth Laka Instrukcja

18 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024