Instrukcja obsługi SereneLife AZSLCATL320


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SereneLife AZSLCATL320 (4 stron) w kategorii Myjka wysokociśnieniowa. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
SLCATL320
User's Manual
Portable Toilet
SereneLifehome.com
www.SereneLifehome.com
Assembly & Care Instructions
IMPORTANT
Before using our product, please familiarise
yourself with the components.
Features
• High density polyethylene construction.
• Completely self contained.
• No external connections required.
• Secure clamps and latches.
All parts are easily replaced by end users.
• 20L waste holding tank.
• 10L fresh water tank.
• Easy to carry and clean.
Adult sized seat and lid are well constructed.
Always flushes with clean water, no water is
re-circulated.
• Completely self-contained. No external water
or power connections.
• Fresh water capacity provides up to 50 flushes.
Attractive matt finish conceals marks, and
allows scrubbing without damage.
• Double sealed drain valve protects against
leakage and odour.
• Heavy duty, corrosion resistant side latches lock
tanks together.
• Detached waste holding tank is easy to empty.
• Both tanks are single piece construction with
no leaking seams.
• Waste level indicator tells you when to empty.
• No splash rotating pour spout.
• Innovative T-type 3 way flush nozzle ensures
a full bowl coverage.
• Upgraded piston pump works more efficiently.
• Selectable bracket can increase the height.
Parts Listing
No.
Part No.
Description
1
CHH-T-009
Seat Cover
2
CHH-T-010
Seat
3
CHH-T-011
Hinge Pin
4
CHH-T-015
Piston Pump Assembly
5
CHH-T-019
Cap, Fresh Water Holding Tank
6
CHH-T-012
Fresh Water Holding Tank Assembly
7
CHH-T-021
Latch Assembly
8
CHH-T-003
Sealed C Ring
9
CHH-T-014
Slide Valve Assembly
10
CHH-T-004
Sealed D Ring
11
CHH-T-023
Cap. Rotating Pour Spout.
12
CHH-T-025
Rotating Pour Spout
13
CHH-T-024
Waste Holding Tank 20L
www.SereneLifehome.com
Assembly & Care Instructions
PREPARING FOR USE
1. Set the SLCATL320 on its front side so that
the cap on the waste holding tank is in a vertical
position. Remove the cap and add deodoriser
following instructions on the deodoriser container.
Tighten the cap firmly.
2. Set the toilet in an upright position and remove
the cap located on the right rear side of the fresh
water tank. Fill with fresh water up to the top of
the fresh water tank. Then tighten the cap firmly.
Caution:
A. Do not add deodoriser to top fresh water tank.
B. Avoid adding holding tank deodoriser through
bowl. Use cap on the bottom rear tank if possible.
Rinse o any spilled or splashed deodoriser
immediately.
C. Atmospheric pressure and temperature
changes may cause pressure build up in lower
holding tank. Caution should be used when first
opening the slide valve.
USE AND OPERATION
2. Depress Flush Pump to add water to the bowl.
3. After use, pull Slide Valve handle out.
4. Depress Flush Pump again to rinse the bowl.
5. Close Slide Valve by pushing in fully.
Bellows
Pump
Slide
Valve
EMPTYING WASTE HOLDING TANK
The has a 20L waste holding tank. It SLCATL320
should be emptied when contents reaches approxi-
mately 2cm below Slide Valve, or the level indicator
turns to red.
1. Separate tanks by pulling outward on side
latches, then lifting upward on water tank. Make
sure slide valve is completely closed.
2. Use moulded handle to carry the holding tank.
3. Remove pour spout cap while it is pointing
upward.
4. To avoid splashing, slowly pour contents out of
the tank. Add fresh water, close cap and shake tank
to rinse.
5. Remove cap and pour rinse water out of the tank.
Close cap firmly and assemble fresh water tank and
waste holding tank together again.
6. Prepare for continued use by following steps 1
and 2 of “Preparing for Use”.
SAFETY INSTRUCTION
1. Handle with care.
2. Avoid exposure to direct sunlight for extended
periods of time.
3. Avoid high temperatures over 50°C.
4. To avoid injury DO NOT lean against lid when
being used.
5. Ensure waste tank is cleaned regularly.
6. Suitable for use with any brand of portable toilet
chemicals and deodorisers.
MAINTENANCE
1. Lubricate Slide Valve seals periodically with
silicone spray or white grease lubricant.
2. The Slide Valve may be removed for cleaning or
inspection by simply unscrewing in a counter
clockwise direction.
3. Clean exterior of toilet with a mild, non-abrasive
bathroom cleaner.
STORAGE
To store our Portable Toilet when not in use:
1. Empty the top tank and waste holding tank.
2. Make sure all water is cleared from the bellows
pump by depressing pump several times.
3. Stored away from direct sunlight.
Note: A small amount of water may remain in the
top tank but will be harmless during storage.
.


Specyfikacje produktu

Marka: SereneLife
Kategoria: Myjka wysokociśnieniowa
Model: AZSLCATL320

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SereneLife AZSLCATL320, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Myjka wysokociśnieniowa SereneLife

Instrukcje Myjka wysokociśnieniowa

Najnowsze instrukcje dla Myjka wysokociśnieniowa

Sun Joe

Sun Joe SPX3001-RM Instrukcja

14 Października 2024
Worx

Worx WG629.1 Instrukcja

13 Października 2024
PowerPlus

PowerPlus POWXG9025 Instrukcja

10 Października 2024
Cecotec

Cecotec HidroBoost 1400 Instrukcja

9 Października 2024
Einhell

Einhell RT-HP 1648 TR Instrukcja

9 Października 2024
Einhell

Einhell RT-HP 1545 Instrukcja

9 Października 2024
Einhell

Einhell HR 160 Instrukcja

9 Października 2024
Anova

Anova H1800 Instrukcja

8 Października 2024
Anova

Anova H1950 Instrukcja

8 Października 2024