Instrukcja obsługi Sennheiser ClipMic Digital

Sennheiser mikrofon ClipMic Digital

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sennheiser ClipMic Digital (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

3B Adjusting Input Level with

Apogee Maestro App

XOpen Apogee Maestro app and choose Sennheiser

ClipMic digital from the main menu.

1 Tap the button to hear your micro-Input Monitoring

phone input.

2 Turn the knob to increase or decrea-Gain Adjustment

se the microphone input to the desired level. Small

adjustments can also be made by pressing either the

“–“or “+“ buttons 3.

Tips for Setting Input Level

The best way to do this is to monitor the loudest

sound you will be recording and adjust the input

gain so the input metering remains green, yellow or

orange and not red. If the microphone input meter

becomes red when recording, the input is too high

and the recording will be distorted.

4 Select an preset. The presets use Input Processing

onboard DSP processing to shape the sound with EQ,

compression and limiting to achieve the most natural

or unique result. Select or leave as is to No Processing

bypass this feature.

1 Tap to operate transport controls.

2 Force tap to toggle favorite status.

3 Tap to add a marker.

4 Tap to reset max. peak display.

5 Tap “+” or “–“ to adjust input gain.

ClipMic digital

Quick Start Guide

4Recording

Note:

It is recommended that you set your iOS device to

airplane mode to prevent any incoming calls from

disrupting your recordings.

XOpen Apogee MetaRecorder or any other Core Audio

compatible recording App.

ClipMic digital should be automatically detected and

selected as the input device.

XIf you haven’t already done so, connect headphones to

the built-in output on your iOS device and enable input

monitoring in the recording App.

XTap the button Record 1 in the App to begin.

3C Apple Watch Remote

Control

XMetaRecorder offers an Apple Watch App to remotely

operate these controls.

Sennheiser electronic GmbH & Co. KG

Am Labor 1, 30900 Wedemark, Germany

www.sennheiser.com

Publ. 06/18 A06

In the Box

1 ClipMic digital microphone

1 Clip

1 Metal wind screen

Overview

1 Sennheiser ME 2-II microphone capsule

2 Apple MFi certified Lightning connector

3 Apogee PureDigital A/D conversion circuitry

1 Installing the App

System Requirements

• iPhone 6, iPhone 6 plus, iPhone 5s, iPhone 5c

iPhone 5

• iPad Air 2, iPad Air, iPad (4th generation)

• iPad mini 3, iPad mini 2, iPad mini

• iPod touch (5th generation)

• iOS version: 8.0 and later

• Apogee MetaRecorder App, Apogee Maestro App or

any Core Audio compatible App on iOS

−Apogee MetaRecorder allows you to record audio

and control your ClipMic digital microphone.

−Apogee Maestro allows you to control your

ClipMic digital microphone.

This is not an App for recording.

Apogee MetaRecorder Apogee Maestro

XInstall Apogee MetaRecorder or Apogee Maestro from

Apple’s App Store for iOS.

Note:

It is possible to record with ClipMic digital using any

Core Audio compatible App.

2 Connecting to your iOS Device

XConnect ClipMic digital to the

Lightning port on your iPhone,

iPad or iPod touch.

By default, you will not hear ClipMic

digital until input monitoring is

enabled in an App.

XConnect headphones to the built-in analog output on

your iPhone, iPad or iPod touch.

This is necessary to avoid feedback when monitoring

your microphone input.

3A Preparing the Recording

ClipMic digital’s input gain can be controlled from either

of Apogee’s two iOS Apps or from any recording App that

supports Core Audio input control.

Adjusting Input Level with Apogee

MetaRecorder App

1 Open Apogee MetaRecorder and tap the tab.Rec/Play

2 Confirm that appears just below the ClipMic digital

microphone icon.

3 Tap the microphone icon to reveal the input

level slider.

4 Drag the input slider with your finger to adjust the

microphone input to the desired level.

5 Tap the tab and enable input monitoringSettings 6.

Settings

Input Monitor

Measurement Mode

Latency

Sennheiser ClipMic digital Connected >

Configu ware rd ha re specific settings of a

connected Apogee product.

When enabled, r es the button to be helequir d

down for 3 seconds to pause or stop recording.

Add Marker at Start Record

Long Press to Pause/Stop

Prevent Screen Lock

Very Low Low

9:41 AM 100%

Markers SettingsScenes Rec/Play

Normal

1 Carrying pouch

1 Quick Start Guide

Attachment of the Microphone

25 cm (10 inches)

For more info on Apogee MetaRecorder

and other compatible apps,

visit www.apogeedigital.com/apps

Specyfikacje produktu

Marka:	Sennheiser
Kategoria:	mikrofon
Model:	ClipMic Digital
Długość kabla:	1.6 m
Technologia łączności:	Przewodowa
Częstotliwość mikrofonu:	30 - 20000 Hz
Typ kierunku mikrofonu:	Wielokierunkowy
Wyciszenie mikrofonu:	Tak
Interfejs urządzenia:	Lightning
Waga mikrofonu:	24 g
Przepływność:	24 bit