Instrukcja obsługi Sencor SWS 6300

Sencor elektroniczna stacja pogody SWS 6300

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sencor SWS 6300 (19 stron) w kategorii elektroniczna stacja pogody. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/19
SWS 6300
EN – 2
We thank you for the purchase of our Color Display Weather Station. It has been designed and
constructed using innovative components and techniques to enable the perfect display by this device.
This unit is also equipped with an outdoor sensor.
Please read the entire instruction manual before using the product and then save it for future reference.
We reserve the right for any errors in test or images and any necessary changes made to technical data.
Things to consider:
1. Other wireless equipment using the same frequency band can reduce the transmission range.
2. The range of all wireless equipment depends on the type of obstacles located between the transmitter
and the receiver (e.g. a concrete wall will interfere with the signal much more than a plasterboard
wall).
If you experience problems, try the following:
1.  Turno󰀨anyotherexistingwirelessequipmenttocheckwhetherthisisthecauseoftheproblem.
2.  Moveanyotherexistingwirelessequipment.Shortenthedistancebetweenthesendingandreceiving
devices and reduce the number of obstacles(walls, furniture,etc.) between them.
3. Try removing and reassembling batteries, if the batteries are old, try new ones.
SAFETY AND GUIDE
- Do not clean any part of the product with benzene, thinner or other solvent chemicals. If necessary,
clean it with a soft cloth.
- Do not dismantle or modify the product in any way.
- Never immerse the product in water, It will damage the product.
- Donotsubjecttheproducttoextremeforce,shock,orfluctuationsintemperatureorhumidity.
- Do not tamper with the internal components.
- Do not use used batteries .
- Do not use different types of batteries alkaline, standard or rechargeable batteries with this product.
- Remove the batteries if storing this product for a long period of time, otherwise the battery might
damage the product.
- Do not dispose of this product as unsorted municipal waste, it’s necessary to separately collect it for
special treatment.
- Do not place the main unit in rain or moisture.The transmit range depends on the type of obstacles
located between the transmitter and the receiver (e.g. a concrete wall will interfere with the signal
much more than a plasterboard wall).
- Be sure the sensor is mounted vertically, to allow moisture to drain out properly. Place out of direct
sunlight & ensure the sensor is well-ventilated.
- The distance between main unit and sensors should be at least 5~ 6.5 feet (1.5~2 meters) away from
any interfering sources such as computer monitors or TV sets.
- The main unit stay away from the metal window frames.
- Please do not use other electrical products such as headphones or microphone operating on the
same signal frequency. (433.92MHz), neighbors using electrical devices operating on the same signal
frequency can also cause interference.
- Place the main unit in a dry area, free of dirt and dust. To ensure accurate temperature measurement,
place out of direct sunlight and away from heat sources or vents.
PACKAGE CONTENTS
1xDigitalWeatherStation
3xRemoteSensor
1xUserManual
1*DC Adaptor
(Batteries are not included)
Power Supply
EN – 3
MAIN UNIT INSTALLATION
RemovetheprotectivelmthatisappliedtotheLCDscreenpriortousingtheproduct.
Plugged in with power adapter and use, battery-power is optional, since previous setting will be reset
when plugged out, we recommend install the batteries for the base station.
Base station can stand upright on the table.
SENSOR INSTALLATION
- Base station supports up to 3 sensors connection, the sensor switch is located inside the battery
compartment, it can be switched 1,2,3, matching the info of Channel 1, Channel 2, Channel 3 that
synchronizeontheOUTDOORposition.
1. Remove the battery compartment cover, chose the channel (1,2,3)by switching the channel shift.
2. Insert2xAAbatteriesmatchingthecorrectpolarity(+and-),theredledlightwillashforonce,then
assemble the battery compartment.
3. Put the sensor the position you desire.
Low Battery Indicator
- When battery power for main unit is lower than 3.6V,or when the power for remote sensor is lower
than2.5V,thelowbatteryindicatorwilldisplayontheLCD.
- When it is powered by DC adaptor,the batteries are for memory function. If the low battery indicator
for main unit still shows, that means the batteries’ power for main unit is lower than 3.6V,please check
the batteries situation.
- To avoid batteries runs out, getting rotten and damage the units. please change batteries on time
when low battery indicator appear.
- Please use alkaline dry batteries, do not use rechargeable batteries.
Initialization
1. Installbatteriesformainunitrst,theninstallbatteriesforRemotesensor,Plugintheadaptor
2. Afterpoweron,LCDwilldisplayfullindicatorfor3seconds,andinthemeanwhile,temperature
sensor and humidity sensor inside will detect indoor temperature &humidity,and then it will start to
receiveoutdoorsignalwhichlastformax3minutes.

Specyfikacje produktu

Marka: Sencor
Kategoria: elektroniczna stacja pogody
Model: SWS 6300

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sencor SWS 6300, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje elektroniczna stacja pogody Sencor

Sencor

Sencor SWS 8700 Instrukcja

30 Lipca 2024
Sencor

Sencor SWS 65 Instrukcja

30 Lipca 2024
Sencor

Sencor SWS 270 Instrukcja

30 Lipca 2024
Sencor

Sencor SWS 290 Instrukcja

30 Lipca 2024
Sencor

Sencor SWS 51 W Instrukcja

30 Lipca 2024
Sencor

Sencor SWS 15 GN Instrukcja

30 Lipca 2024
Sencor

Sencor SWS 185 USB Instrukcja

30 Lipca 2024
Sencor

Sencor SWS 11 Instrukcja

30 Lipca 2024
Sencor

Sencor SWS 51 B Instrukcja

30 Lipca 2024
Sencor

Sencor SWS 15 B Instrukcja

30 Lipca 2024

Instrukcje elektroniczna stacja pogody

Najnowsze instrukcje dla elektroniczna stacja pogody

Alecto

Alecto WS-2500 Instrukcja

4 Października 2024
Alecto

Alecto WS-1200 Instrukcja

4 Października 2024
Nedis

Nedis WEST403BK Instrukcja

21 Września 2024
TFA

TFA 30.3256.02 Instrukcja

21 Września 2024
TFA

TFA CLEAR 35.1168.02 Instrukcja

21 Września 2024
Cotech

Cotech E0336WST4H4PR Instrukcja

2 Września 2024
Cotech

Cotech E0317WST2H2-V3 Instrukcja

1 Września 2024
Cotech

Cotech E0003HA-B3V-YX Instrukcja

1 Września 2024
Cotech

Cotech E0317WST2H2-V2 Instrukcja

1 Września 2024
Fluke

Fluke 700G29 Instrukcja

22 Sierpnia 2024