Instrukcja obsługi Senco PC1010

Senco kompresor PC1010

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Senco PC1010 (48 stron) w kategorii kompresor. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/48
Operating Instructions
Warnings for the safe use of this compressor are included in this manual.
Des mises en garde pour une utilisation en toute sécurité de ce compresseur
sont incluses dans ce manuel.
En este manual se incluyen avisos para el uso seguro de este compresor.
PC 1010
Electric Air Compressor
PC1010 Revised May 14 2012,
(Replaces 2/1/08)
Questions? Comments? call SENCO's toll-free ction-line: 1-800-543-4596 or e-mail: toolprof@senco.com A
© 2012 Senco Brands, Inc.by
Senco Brands, Inc.
4270 Ivy Pointe Blvd.
Cincinnati, OH 45245
TABLE OF CONTENTS
INTRODUCTION ................................................................... 3
SAFETY INSTRUCTIONS...................................................... 3
INSPECTION ......................................................................... 3
SAFETY WARNINGS .........................................................4-7
ELECTRICAL ................................................................ 4
EXPLOSION OR FIRE .................................................. 5
BURSTING 5...................................................................
BREATHING ................................................................. 6
BURNS ......................................................................... 6
FLYING OBJECTS ........................................................ 6
MOVING ...........................................................PARTS 7
NEGLIGENCE .............................................................. 7
AIR COMPRESSOR DAMAGE ..................................... 7
COMPRESSOR FEATURES ................................................. 8
PREPARATION .................................................................... 10
INITIAL SET-UP ......................................................... 10
LOCATION .................................................................. 10
ELECTRICAL .............................................................. 10
OPERATION ........................................................................ 11
PRE-START CHECKLIST ........................................... 11
START-UP .................................................................. 11
SHUTDOWN .............................................................. 11
MAINTENANCE ................................................................... 11
TROUBLESHOOTING ................................................... 12-13
SPECIFICATIONS ............................................................... 14
WARRANTY ........................................................................ 15
CALIFORNIA PROPOSITION 65 WARNING................ 7
PART RTS CHA ..................................................................... 16
3
INTRODUCTION
Congratulations on the purchase of your new SENCO® Air Compressor! You can be assured your SENCO Air
Compressor was constructed with the highest level of precision and accuracy. Each component has been rigorously
tested technicians to ensure the quality, endurance and performance of this air compressor.by
This operator manual was compiled for your benefit. By reading and following the simple safety, installation ands
operation, and maintenance steps described in this manual, you will receive years of troublefreeoperation
from your new SENCO Air Compressor. . The contents of this manual are based on the latest product
information ailable at the time of publication. The manufacturer reserves the right to make changes in price,av
color, materials equipment, specifications or models at any time without notice.
SAFETY ALERT!
A
DANGER, WARNING or CAUTION
safety warning will be surrounded by a ”SAFETY ALERT BOX”.
This box is used to designate and emphasize Safety Warnings that must be followed when operating this
air compressor. Accompanying the safety warnings are “Signal rds” which designate the degree orWo
level of hazard seriousness. rThe “Signal Wo ds” used in this manual are as follows:
DANGER:
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
WARNING:
Indicates an imminently hazardous situation which, if not avoided,
COULD result in death or serious injury.
CAUTION:
Indicates an imminently hazardous situation which, if not avoided
MAY result in minor or moderate injury or to the airdamage
compressor.
The symbols set to the left of this paragraph are “Safety Alert Symbols”.
These symbols are used to call attention to items or procedures that could
be dangerous to you or other persons using this equipment.
ALWAYS PROVIDE A COPY OF THIS MANUAL ANYONE USING THIS EQUIPMENTTO . READ ALL
INSTRUCTIONS IN THIS MANUAL AND ANY INSTRUCTIONS SUPPLIED BY MANUFACTURERS OF
SUPPORTING EQUIPMENT BEFORE OPERATING THIS AIR COMPRESSOR AND ESPECIALLY POINT OUT
THE “SAFETY WARNINGS” TO PREVENT THE POSSIBILITY OF PERSONAL INJURY TO THE OPERATOR.
INSPECTION
Unbox the air compressor and write in the serial number in the space provided belo Inspect for signs of obviousw.
or concealed freight damage Be sure that all damaged parts are replaced and any mechanical problems are.
corrected prior to the operation of the air compressor.
SERIAL NUMBER__________________________________________
If ou hay ve Questions or Comments call SENCOs toll-free Action-line: 1-800-543-4596 or, e-mail:
toolprof@Senco.com
Please ha the following information ailable for all service calls:ve av
1. Model Number
2. Serial Number
3. Date and Place of Purchase
Senco, 4270 Ivy Pointe Blvd., Cincinnati, OH 45245


Specyfikacje produktu

Marka: Senco
Kategoria: kompresor
Model: PC1010

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Senco PC1010, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kompresor Senco

Senco

Senco PC1010 Instrukcja

4 Września 2024

Instrukcje kompresor

Najnowsze instrukcje dla kompresor

MSW

MSW -SPS-24 Instrukcja

15 Października 2024
MSW

MSW -UVRSRI Instrukcja

15 Października 2024
Ferm

Ferm CRM1027 FCO-1524 Instrukcja

13 Października 2024
Einhell

Einhell BT-AC 180/6 Kit Instrukcja

9 Października 2024
Ozito

Ozito ACP-2115K Instrukcja

9 Października 2024
Anova

Anova CA30S Instrukcja

8 Października 2024
Anova

Anova CA50S Instrukcja

8 Października 2024
DeWalt

DeWalt DCC2520 Instrukcja

8 Października 2024
SPL

SPL Kultube Instrukcja

8 Października 2024