Instrukcja obsługi Senal CSP-142

Senal Niesklasyfikowane CSP-142

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Senal CSP-142 (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
Table of Contents:
Introduction. ............................................. 1
Overview ...................................................2
Precautions ...............................................2
Setting Up ................................................ 3
Preparing the ceiling ............................ 3
Drop Ceilings .................................... 3
Fixed Ceilings ................................... 3
Connecting the wiring to the
removable locking connector............3
Wiring Schemes ..................................... 4
Attaching and securing the
wiring to the speaker............................4
Installing the speaker into
the ceiling..................................................5
Adjust the Multi-Tap Selector.............5
Attaching the Grille .............................. 5
Painting ..................................................... 5
Preparing.............................................5
Painting the rim................................5
Painting the grille.............................5
Specifications ......................................... 6
Frequency Response ........................... 6
Troubleshooting ......................................7
Three-Year Limited Warranty.............7
CSP-SERIES
Thank you for choosing Senal.
The CSP-series speakers are passive coaxial two-way speakers that provide premium sound
quality for use with 70V or 100V systems and for low-ohm systems.
These high power - low distortion speakers feature wide coverage that evenly distributes high
fidelity audio to fill large and small spaces. All models are ideal for broadcasting announcements
and music reproduction in commercial and residential applications.
The CSP-series ceiling speakers have a multi-tap transformer, which allows flexibility in
configuring multiple speakers of a high-impedance system. It is easily accessed with the multi-
tap selector on the front baffle of the speaker. Low frequencies are enhanced with a vented
port, and precise and smooth high frequencies are delivered by the coaxially mounted 3/4 "
titanium-coated tweeter. The sealed backcan enhances overall fidelity by focusing the sound
and preventing the distribution of sound into the surrounding ceiling structure.
Removable locking connectors simplify the process of wiring the speakers. Each speaker comes
with the mounting brackets and hardware necessary for installation. The attachment screw
system makes installation simple while providing a secure mounting connection to most ceiling
types. Secondary support tabs ensure extra security for compliance with building codes. The
speakers can be painted to match ceiling décor.
CSP-162
The CSP-162 is a powerful 150-watt, low-distortion ceiling speaker with a built-in multi-tap
transformer with maximum power of 60W. It features a 6.5-inch woofer and 3/4 titanium-"
coated tweeter.
CSP-142
The CSP 142 is a compact 80-watt ceiling speaker with a built-in multi-tap transformer with
a maximum power of 30W. It features a 4-inch woofer and 3/4 titanium-coated tweeter. "
Low clearance of 6.25 (15.9 cm) makes it possible to install this speaker into smaller ceiling "
spaces.
USER’S GUIDE
2
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Overview/Precautions
1. Front baffle
2. Woofer
3. Tweeter
4. Multi-tap selector
5. Attachment screws
6. Vented port
7. Removable locking connector
8. Secondary support tab
9. Mounting tabs
10. Connecter cover plate (CSP-162)
11. Cover plate door (CSP-162)
12. Adjustable strain-relief fitting
(CSP-162)
13. Removable cover (CSP-142)
14. Knockout (CSP-142)
15. (2) Screws (CSP-142)
16. Perforated grille
17. Rails
18. C-Ring
19. C-Ring slots
20. C-Rings adjuster nuts and bolts
21. Grille removal key
22. Cutout template
2.2.
10.
12.
11.
5.
9.
5. 3.3.
6.
7.
8.
6.
9.
4.
7.
8.
1.
14.
13.
15.
1.
4.
CSP-142CSP-162
Overview
16.
17.
18. 20.
19.
21.
22.
Precautions
▪ Please read and follow these
instructions, and keep this
manual in a safe place.
▪ Do not connect the speaker to
a high-voltage system when
the tap is set on bypass 16
ohms (16R setting on the tap
selector). Doing so will damage
the speaker.
▪ Use only the correct,
recommended voltage.
▪ Do not attempt to disassemble
or repair this product. Repairs
should only be done at an
authorized repair shop.
▪ Keep this product away from
water, moisture, and any
flammable gases or liquids.
▪ Handle this product with care.
▪ Clean this product with a soft
dry cloth.
▪ All photos are for illustrative
purposes only.
3
Setting Up
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
Setting Up
The CSP-series speakers are designed for easy installation. If
necessary, installation can be accomplished without access above
the ceiling.
Tools needed for installation
▪ Drywall saw
▪ Slotted screwdriver
▪ Phillips head screwdriver
▪ Wire stripper
▪ Pencil
Preparing the ceiling
Drop Ceilings
1. Locate the ceiling tile in which the speaker is to be mounted and
remove the tile from the ceiling.
2. Measure to find the center of the tile and place a mark there. Use
that mark to center the cutout template on the tile. With a pencil,
trace an outline of the cutout template on the tile.
3. Use a drywall saw to cut along the traced
line.
For easy cleanup it’s best to Pro tip:
perform this step while placing the tile over
an open box or trashcan.
4. Replace the ceiling tile into the ceiling.
5. Insert the rails through the hole.
6. Place the rails on either side of the hole so that the inverted “V”
ends of the rails fit over the ceiling grid rails. The flat side of the
rails should rest on the tile, and the side with the pre-cut holes
should stand perpendicular on either edge of the hole.
The rails of the mounting bracket do not attach to the Note:
ceiling grid rails, but suspend over them.
7. Insert the C-ring by angling
it through the hole using
the open end of the ring.
8. Fit the slots of the C-ring over the
rails and attach it by inserting the
bolts through the tabs of the C-ring
and securely tightening the nuts.
9. Pull the speaker wire out so that it
extends beyond the ceiling and gives
you enough length to complete the
installation.
Fixed Ceilings
1. Locate the spot where the speaker will be installed
2. Use a stud finder to locate studs in the ceiling. Make sure they
won’t interfere with your installation. If a stud is near the location
of your hole, make sure that there is 1-inch clearance between the
edge of the hole and the stud.
Pro tip: Drill a small pilot hole and probe inside the ceiling with
a stiff wire to make sure there are no obstructions where you are
planning on placing the speaker.
3. With a pencil, trace an outline of the cutout template on the
ceiling.
4. Use a drywall saw to cut along the traced line and remove the
cutout from the ceiling.
5. Pull the speaker wire out so that it extends beyond the ceiling
and gives you enough length to complete the installation.
Connecting the wiring to the removable locking
connector
CSP-162
1. Open the connector cover plate door.
2. Remove the locking connector from the
socket
3. Strip approximately 1/4 (6 mm) off the "
ends of the insulation on the speaker
wires.
4. Insert the exposed ends of the wires
into the connector and tighten the
screw-down terminals using a small flat blade
screwdriver.
CSP-142
1. Remove the cover by unscrewing the two
screws attaching it to the backcan.
1.1. Determine the angle your speaker
wires approach the speaker and
remove the appropriate knockout.
1.2. Feed the wires through the
knockout.
2. Remove the locking connector from the
socket
3. Strip approximately 1/4 (6 mm) off the "
ends of the insulation on the speaker
wires.
4. Insert the exposed ends of the wires into
the connector and tighten the screw-
down terminals using a small flat blade
screwdriver.
Inside-ceiling view
of assembled rails
and C-ring.

Specyfikacje produktu

Marka: Senal
Kategoria: Niesklasyfikowane
Model: CSP-142

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Senal CSP-142, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Senal

Senal

Senal SCI-3212 Instrukcja

23 Grudnia 2024
Senal

Senal CSP-142 Instrukcja

23 Grudnia 2024
Senal

Senal PS-48B Instrukcja

23 Grudnia 2024
Senal

Senal ASM-5 Instrukcja

23 Grudnia 2024
Senal

Senal ASM-3 Instrukcja

23 Grudnia 2024
Senal

Senal CSP-162 Instrukcja

23 Grudnia 2024
Senal

Senal CS-88 Instrukcja

23 Grudnia 2024
Senal

Senal ASM-4 Instrukcja

23 Grudnia 2024
Senal

Senal ME-220-CL Instrukcja

23 Grudnia 2024
Senal

Senal OLM-2S-P Instrukcja

23 Grudnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

D-Link

D-Link DWA-142 Instrukcja

23 Grudnia 2024
Matterport

Matterport Pro2 3D Camera MC250 Instrukcja

23 Grudnia 2024
Lucide

Lucide Casper i 79166/19/12 Instrukcja

23 Grudnia 2024
Lucide

Lucide Merlina 78193/30/66 Instrukcja

23 Grudnia 2024
Lucide

Lucide Pippa 77583/81/30 Instrukcja

23 Grudnia 2024
Lucide

Lucide Pia 45380/04/30 Instrukcja

23 Grudnia 2024
Lucide

Lucide Pia 45280/01/30 Instrukcja

23 Grudnia 2024
Lucide

Lucide Anaka 45179/03/30 Instrukcja

23 Grudnia 2024
Lucide

Lucide Zych 45156/01/97 Instrukcja

23 Grudnia 2024
Lucide

Lucide Robin 34539/81/41 Instrukcja

23 Grudnia 2024