Instrukcja obsługi SE Electronics DM3


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SE Electronics DM3 (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
DM3
Use r Ma nu al
Thank you!
Thank you for choosing the sE Electronics DM3. We
hope you enjoy using it as much as we’ve enjoyed
designing and building it for you.
The DM3 is an active DI, employing the well-established
DYNAMITE technology of our DM1 and DM2 inline
preamps. Its Ultra Hi-Z input, massive headroom and
dedicated Class-A output-buffer amplifier ensure that
you’ll always get the best out of your instrument. The
DM3 can be directly connected to any Phantom-powered
XLR input, with no need for an extra cable. Its compact
size allows it to easily fit into your pocket, so the sound
quality you're looking for is always at your disposal.
Please note: The DM3 requires +48V Phantom power for
operation.
Ultra -Z inputHi
The DM3’s ultra-high input impedance preserves the
individual sonic character of your instrument without any
compromise. Instruments with passive pickups (i.e.
electric guitars, stringed instruments with piezo pickups,
vintage high-impedance microphones) will especially
benefit from the DM3’s stunningly high input impedance
of 10 MOhms.
Attenuation pad
For high-output instruments (i.e. electric guitars with
active pickups, keyboards, drum machines) a three-
position attenuation switch allows you to reduce the
signal by 15 or 30 dB. This is useful the signal level is if
too high for the input of your preamp or mixer.
Please note: The switch is embedded in a recess to
prevent unintended access; you will need a miniature
screwdriver to change its settings.
Ground lift switch
The DM3 features a dedicated three-position ground lift
switch. In the position, the ground lift is deactivated. Off
If you are experiencing unwanted hum or buzz, a ground
loop might be causing this. Turning the switch to the On
position will break any such loops, greatly reducing
noise.
The switch’s third position engages our innovative new
On+ circuitry. The innovative electronic design can help
to reduce unwanted noise, not only in the low-frequency
but also in the in the high-frequency range. This is a great
option if you are still experiencing a hissing sound or
radio frequency interference with the ground lift
engaged. Please be aware that results depend on the
noise source; your individual setup and radio frequency
environment (i.e., cell phone proximity, wireless
broadband services, power supplies, Wi-Fi and Bluetooth
devices, transformers). Not all humming or buzzing is
generated by group loops.
Please note: The switch is embedded in a recess to
prevent unintended access; you will need a miniature
screwdriver to change its settings.
Lockable 1/4 input jack
The DM3’s 1/4” input jack has a locking mechanism that
prevents unintended disconnection. This is ideal for both
studio and stage applications.
Powering
To ensure proper operation, your sE product requires a
Phantom power source that provides 48 Volts according
to IEC 61938.
Risk of damage
Do not connect your sE product to any power
supply other than a Phantom power source
(input with Phantom power or external IEC
standard Phantom power supply) with a
floating connector, using a balanced cable with studio-
grade connectors to IEC 268-12 only. This is the only way
to ensure safe and reliable operation.
Please be aware that Phantom power cannot pass
through TRS connectors. A balanced microphone cable
with XLR connectors at both sides is required to provide
Phantom power to a microphone.
Safety and maintenance
Warning
The product may contain small, detachable
parts, which may cause choking, personal
injury, or death, especially in children. Please


Specyfikacje produktu

Marka: SE Electronics
Kategoria: Niesklasyfikowane
Model: DM3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SE Electronics DM3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane SE Electronics

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024