Instrukcja obsługi Scotts LPS40820S

Scotts kosiarka LPS40820S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Scotts LPS40820S (42 stron) w kategorii kosiarka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/42
OWNER’S MANUAL
CORDLESS 20 VOLT POLE SAW/LITHIUM-ION BATTERY PACK
Copyrights. All Rights Reserved.
Model LPS40820S
Your pole saw has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the owner’s manual before
using this product.
Thank you for your purchase.
DO NOT RETURN THIS PRODUCT TO THE STORE. OPERATING, ASSEMBLY, PART,
SERVICE QUESTIONS? GO TO SCOTTS.AMERICANLAWNMOWER.COM OR CALL
1- -618-7474 BETWEEN 8:00AM-5:00PM EST FOR ASSISTANCE. 800
SAVE THIS MANUAL FOR FUTURE REFERENCE
ADD OIL TO OIL RESERVOIR BEFORE FIRST USE
BATTERY MUST BE CHARGED
BEFORE FIRST USE. TWO TO
THREE INITIAL CHARGING/
DISCHARGING CYCLES MAY BE
REQUIRED TO ACHIEVE
MAXIMUM RUN TIME/CAPACITY.
CA Compliant
Charger Included
(Model No.
CHL82000)
2
LPS40820S
IMPORTANT SAFETY WARNINGS
WARNING: Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
Electrical safety
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Power tool use and care
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
TO REDUCE RISK OF INJURY:
Before any use, be sure everyone using this tool reads and
understands all safety instructions and other information
contained in this manual.
CAUTION: Wear appropriate personal hearing protection
during use. Under some conditions and duration of use,
noise from this product may contribute to hearing loss.
Save these instructions and review frequently prior to use and
in instructing others.
WARNING: When using electric gardening appliances, basic
safety precautions should always be followed to reduce risk of
fire, electric shock, and personal injury, including the
following:
READ ALL INSTRUCTIONS
3
LPS40820S
GENERAL POWER TOOL SAFETY WARNINGS
Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Battery tool use and care
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, seek
medical help. Liquid ejected from the battery may cause
irritation or burns
Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is
maintained.
When servicing a power tool, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of
unauthorized parts or failure to follow Maintenance
instructions may create a risk of shock or injury.
AVOID DANGEROUS ENVIRONMENTS – Don’t use pole
saw in rain, damp or wet locations. Do not operate pole saw in
gaseous or explosive atmospheres. Motors in these tools
normally spark, and the sparks might ignite fumes.
DRESS PROPERLY – Don’t wear loose clothing or jewelry.
Wear protective hair covering to contain long hair. They can
be caught in moving parts. Use of rubber gloves and
substantial footwear is recommended when working outdoors.
USE SAFETY GLASSES –Wear safety glasses with side
shields or goggles that are marked to comply with ANSI Z87.1
standard when operating this product. Use face or dust mask
if environment is dusty.
DANGER: Risk of cut. Keep hands away from chain. Keep
both hands on pole and handle when power is on.
USE RIGHT APPLIANCE – Do not use appliance for any job
except that for which it is intended.
USE HEAD AND FACE PROTECTION: Wear a safety hard
hat with a full face shield that meets the ANSI Standards
ANSI Z89.1, or CE Standards while operating the pole saw.
CAUTION: Never stand under the limb being trimmed.
Position yourself out of the way of falling debris.
REMOVE BATTERY FROM POLE SAW when not in use or
when servicing or cleaning. Do not leave unattended.
AVOID UNINTENTIONAL STARTING— Don’t carry the pole
saw with finger on switch, Be sure the switch is off when
installing battery pack.
CAUTION: Never carry pole saw with one hand, Doing so
could cause saw to become unbalanced and damage may
occur. Failure to heed this warning can result in serious
personal injury.
KEEP CHILDREN AWAY: All visitors, children and pets
should stay at a safe distance from the work area.
STORE IDLE POLE SAW INDOORS: When not in use, the
pole saw should be stored indoors in a dry and high or
locked-up place, out of reach of children.
DO NOT ATTEMPT to remove cut material or hold material to
be cut when pole saw is on and the chain is moving. Make
sure switch is off when clearing jammed material from the
chain, Do not grasp the exposed cutting edges when picking
up or holding the saw. Keep all parts of the body away from
the saw chain.
CAUTION: Chain coasts after pole saw is turned off.
WARNING: To protect yourself from electrocution maintain a
min of 50ft (15m) from overhead electrical likes.
DO NOT FORCE POLE SAW—It will do the job better and
with less likelihood of a risk of injury at the rate for which it
was designed.
GENERAL SAFETY

Specyfikacje produktu

Marka: Scotts
Kategoria: kosiarka
Model: LPS40820S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Scotts LPS40820S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje kosiarka Scotts

Scotts

Scotts ST00213S Instrukcja

21 Września 2024
Scotts

Scotts LB22020S Instrukcja

14 Września 2024
Scotts

Scotts LB23020S Instrukcja

13 Września 2024
Scotts

Scotts LPS40820S Instrukcja

12 Września 2024
Scotts

Scotts LHT12220S Instrukcja

12 Września 2024
Scotts

Scotts LB24020S Instrukcja

10 Września 2024
Scotts

Scotts CLPS40020S Instrukcja

10 Września 2024
Scotts

Scotts PS45010S Instrukcja

10 Września 2024
Scotts

Scotts LCS31020S Instrukcja

9 Września 2024
Scotts

Scotts LPHT12122S Instrukcja

5 Września 2024

Instrukcje kosiarka

Najnowsze instrukcje dla kosiarka

Hecht

Hecht 5564 SX Instrukcja

15 Października 2024
Craftsman

Craftsman 25365 Instrukcja

15 Października 2024
AL-KO

AL-KO Solo 4758 VSI Instrukcja

15 Października 2024
AL-KO

AL-KO Classic 4.64 SP-S Instrukcja

15 Października 2024
Gardena

Gardena PowerMax 36 A Li Instrukcja

15 Października 2024
Einhell

Einhell BG-PM 46 Instrukcja

14 Października 2024
Stihl

Stihl RMA 235 Instrukcja

13 Października 2024
Einhell

Einhell GC-PM 46 S Instrukcja

11 Października 2024
BaByliss

BaByliss Pro FX660E Instrukcja

11 Października 2024
Conair

Conair HC108RGB Instrukcja

9 Października 2024