Instrukcja obsługi Saro GERRIT


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Saro GERRIT (3 stron) w kategorii piec do pizzy. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
www.saro.de
Operation Instructions
Conveyor Baker
Model GERRIT
Order no. 175-4001
1. General notes
1. Carefully read these operating instructions through as they contain important
information.
2. It is advisable to keep the operating instructions in a place where you have them
always ready to hand. Should you pass the conveyor baker on to a third party, this
instruction manual must be handed on.
3. As soon as you have unpacked the oven, check whether everything is in a faultless
condition. Should anything be damaged, do not connect the appliance as such, but
inform your dealer.
4. The oven must only be used for the intended purpose. Improper use can cause
damages and lead to the loss of the warranty.
5. Before you connect the conveyor baker, make sure that the type of current stated on
the identication plate corresponds with your mains supply.
6. In the case of fault and/or malfunction, pull the plug out of the socket and inform your
dealer. He will carry out the repair with original spare parts.
7.
Please observe the local regulations concerning accident prevention and disposal.
8.
The manufacturer/dealer cannot be made responsible for damages which arise
through not observing these operating instructions. Apart from this, if these
instructions are not observed, oven safety is no longer guaranteed.
2. Technical specications
Description Conveyor Baker
Model GERRIT
Power connection 230 V / 50 Hz / 1 Ph / 3,6 kW
Dimensions W 470 x D 1.050 x H 400 mm
Weight 24 kg net
10LA page 1of 3
-2- Operation instructions Conveyor Baker model GERRIT
3. Safety notes
1. Exterior surfaces of the oven can be hot. Therefore do not touch the oven during
operation.
2. Do not touch the plug with wet hands.
3. Do not pull the plug out of the socket by the cable.
4. The cable must not hang over table edges and/or sharp edges. It also must not come into
contact with the hot appliance surface or with water.
5. Check regularly the cable. If it is damaged, it must be exchanged by a qualied specialist.
6. Do not leave the oven unattended while it is in use. Children are not able to realise
dangers when handling electronic appliances.
7. Before each cleaning session, allow the oven to cool down and pull the plug out of the
socket.
8. Do not use the oven outdoors.
9. Do not put the oven near to gas or electric ovens and/or other sources of warmth. Take
care that no curtains or other ammable materials come into contact with the oven when
it is in use.
10. Do not place anything on the oven.
11. Switch the oven o before you pull the plug out of the socket.
12. Repairs may only be undertaken by a qualied specialist using original spare parts.
4. Characteristics / outt
Quartz infrared heaters provide faster, more consistent heating than traditional heating
elements.
Variable speed and top/bottom heat control for perfect colour and texture of bread,
bagels, English mufns and more.
Extended stainless steel conveyor belt for easy loading and large warming area for
higher production.
Heated holding area to keep the oven at the perfect temperature.
Smart crumb tray keeps the bread crumbs from falling under the oven.
Hi-limit switch prevents oven from overheating protecting critical component parts.
5. Switching on / operating
1. Put the oven on a stable, flat, heat resistant surface.
2. Clean the exterior surfaces with a damp, warm cloth and/or a sponge and a mild cleaning
agent. Dry everything carefully. The cleaning cloth and/or sponge must not be wet, but
only damp.
3. Before connecting to the mains check whether the type of current stated and the voltage
corresponds with information on the identication plate. Afterwards, plug the plug into the
socket.
4. Turn the power to FULL POWER.
5. Try to set the conveyor speed on 4.
6. Allow warm-up time of 5 to 10 minutes.
7. Place a sample product on the conveyor belt to test the settings.
a) If toasting is too light, turn conveyor speed control counter clockwise to a
slower speed.
b) If toasting is too dark, turn conveyor speed control clockwise to a faster speed.
page 2 of-3
-3- Operatons Instructions Conveyor Baker Model GERRIT
7. Cleaning
1. Before each cleaning session, the oven has to be switched o and the plug WARNING:
has to be pulled out of the socket.
2. Allow the oven to cool down completely and clean it, as is described in point 5 no. 2
„Switching on / operating”.
3. Do not use abrasive cleaning agents and under no circumstances steel wool or abrasive
sponges.
Enclosure
Electric Scheme
10LA
SARO Gastro-Products GmbH - Sandbahn 6 - D-46446 Emmerich - Germany


Specyfikacje produktu

Marka: Saro
Kategoria: piec do pizzy
Model: GERRIT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Saro GERRIT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje piec do pizzy Saro

Saro

Saro Palermo 1 Instrukcja

11 Września 2024
Saro

Saro GERRIT Instrukcja

19 Sierpnia 2024

Instrukcje piec do pizzy

Najnowsze instrukcje dla piec do pizzy