Instrukcja obsługi Sanus ELM205

Sanus klimatyzacja ELM205

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sanus ELM205 (4 stron) w kategorii klimatyzacja. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA

Customer Service: 1-800-359-5520 • info@sanus.com • www.sanus.com

are used for identification purposes and are trademarks of their respective owners.

ELM205 Power Conditioner

(6901-100215 <01>)

Specifications

• 2,700 joule surge suppression

• Dual Stage EMI/RFI noise filtration 20-50dB (100KHz-1MHz)

• Gold-plated coaxial input and outputs

• Combo ethernet/phone jack - supports up to 100Base-T connection speeds

• 125V/60Hz/12 A max

• Suppressed voltage rating: L-N 400V L-G 500V N-G 500V

• Audible alarm if surge has served it’s useful life

• Resettable fuse

• Interchangeable 1’ * or 6’ ** power cords

• ClickFit compatible

* 1’ power cord is intended for use in special installations only; such as, dedicated equipment intended to be mounted near a

receptacle.

** 6’ power cord is intended for use in all other installations.

Warranty

Your Sanus ELM205 has a five year product warranty against manufacturer’s defects. If you have any questions or experience any

problems with your Sanus Elements product, please contact Sanus Systems Customer Service at 1-800-359-5520.

Avoid potential injuries! Do not disassemble the surge protector. Disassembling the surge

protector will void the warranty and may cause serious personal injury.

Avoid potential damage to your electrical components! Disconnect the surge protector during

lightning storms. Not for use near water or in areas with high moisture.

This product contains small items that could be a choking hazard if swallowed. Keep these items

away from young children!

WARNINGS

OPT

Hardware and procedures for multiple mounting configurations are included. When you see this symbol,

choose the correct configuration to suit your needs. Not all hardware included will be used.

The input plug of this power tap is intended to serve as the disconnect device, it shall be easily

accessible and withdrawn.

Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National

Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial

Cable.

CAUTIONS

6901-100215 <01>

Package Contents

[01] x 1

[02] x 1

[03] x 2 [04] x 2 [05] x 1

Resettable Fuse

Interchangeable

Power Cord

In Out In Out

SurgePower Ground

From wall outlet or router

To phone/modem or

ethernet input

From wall, DSS, cable, or other coaxial output

To TV, VCR, or other coaxial input

The Power, Surge, and Ground LED lights illuminate to indicate that the surge protector is working. If the lights fail

to illuminate, see Troubleshooting your Power Conditioner on the next page.

ClickFit Compatible

Transformer Spaced Outlet

Features

6901-100215 <01> 3

Troubleshooting your Power Conditioner

The Power, Surge, and Ground LED lights illuminate under normal operating conditions. If any of the lights fail to illuminate, follow

the instructions below. If any of the lights still fail to illuminate, you need to replace your Power Conditioner.

Power

• If the Power light is off, verify that your power conditioner is plugged into a working outlet.

• If the Power light is still off, unplug all accessories from the surge protected outlets and press the resetable fuse button.

• If the Power light remains off, the power conditioner has served it’s useful life and needs to be replaced.

Surge

• If the Surge light is off but the Power and Ground lights are on, or if the alarm sounds, the power conditioner has served it’s

useful life and needs to be replaced.

Ground

• If the Ground light is off but the Power and Surge lights are on, verify that you are using a properly grounded outlet.

• If the Ground light is still off, the power conditioner has served it’s useful life and needs to be replaced.

Changing your Power Cord

[05]

[02]

OPT

1’ power cord is intended for use in special installations only; such

as, dedicated equipment intended to be mounted near a receptacle.

6’ power cord is intended for use in all other installations.

NOTE

Specyfikacje produktu

Marka:	Sanus
Kategoria:	klimatyzacja
Model:	ELM205
Kolor produktu:	Czarny
Wysokość produktu:	91.4 mm
Szerokość produktu:	196.3 mm
Waga produktu:	910 g
Szerokość opakowania:	152 mm
Wysokość opakowania:	296 mm
Głębokość opakowania:	44 mm
Ilość:	1 szt.
Ilość portów Ethernet LAN (RJ-45):	2
Wartość znamionowa udaru energii:	2700 J
Ilość gniazd sieciowych:	1 x gniazdo sieciowe
Wartość nominalna napięcia wejściowego:	330 V
Filtr EMI/RFI:	Tak
EMI/RFI filtry hałasu:	50 dB