Instrukcja obsługi Sani-Lav ESB2-505L
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sani-Lav ESB2-505L (9 stron) w kategorii Spoelbak. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/9
1
A C O R B AT T E R Y P O WERE D
S I N K W I T H E L E C T R O N I C S E N S O R
Operating Manual for Hands-Free Wall Mount Stainless Steel Sink
AC Models ES2-505L and ES2-505L-0.5
Battery Models ESB2-505L and ESB2-505L-0.5
of Domestic and Foreign Parts
Columbia does not recommend use with harsh chemicals.
Product Compliance
NSF/ANSI 2 Food Equipment, NSF/ANSI 372 Lead-Free Compliant, ASME A112.18.1
2
COLUMBIA SPECIFICATIONS
A C O R B AT T E R Y P O W E R E D
S I N K W I T H E L E C T R O N I C S E N S O R
800.626.2117 columbiasinks.com info@columbiasinks.com
©2021 Columbia Products
Installation Instructions
Step 1
1. Establish sink location on the wall.
2. Determine desired height for the top of the backsplash from finished floor and draw a level
line which will be the top edge of the wall mounting bracket.
3. Hold the wall mounting bracket against the wall and mark the wall where the holes are. Drill
holes and secure bracket to the wall as shown in illustration A. Screws are not provided.
4. Position the sink onto wall bracket.
5. Mark holes for fastening side mounting brackets as shown in illustration B.
6. Remove sink from the wall bracket.
7. Drill holes in wall for securing sink to wall. Screws are not provided.
Step 2
1. Install strainer assembly.
2. Install faucets to the sink following the instructions provided with sensor unit.
3. Attach supply tube with elbow to back of faucet.
4. Install mixing check valve and compression fitting to control box of each sensor faucet.
Step 3
1. Position the sink onto wall bracket and secure to wall.
2. Connect waste line to strainer assembly.
3. Mount sensor control box at desired location on wall.
4. Connect power line from sensor to control box.
5. Attach supply tube from faucet to control box.
6. Connect hot and cold water from the source to mixing check valve.
7. Remove aerator from the spout assemblies and flush water system. (see step 7 sensor
installation instructions)
8. Check connections for leaks.
9. Replace aerator onto the spout.
10. We recommend sealing top of backsplash to wall as shown in illustration C.
Parts List
(1) Wall mount sink
(1) AC or Battery powered sensor faucet assembly
(1) Wall-mounting bracket
(1) Mixing check valve
(1) Strainer assembly with basket
Tools Required
Tape measure
Adjustable wrench
Drill motor and drill bits
Pipe wrench
Level
Safety glasses
Screw drivers: phillips and standard
Pencil
Socket wrench
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds),
Lead, and Phthalates (DEHP) which are known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
NOTE: Lead content originates from Brass components in valves and faucets and is certied under
NSF/ANSI 372 as containing less than 0.25% lead in wetted surfaces.
Notice for California Consumers
Go to for more information on replacement parts and installation videos.columbiasinks.com
Illustration A
Illustration B
Illustration C
3
COLUMBIA SPECIFICATIONS
A C O R B AT T E R Y P O W E R E D
S I N K W I T H E L E C T R O N I C S E N S O R
800.626.2117 columbiasinks.com info@columbiasinks.com
©2021 Columbia Products
16.5”
(419mm)
21”
(533mm)
45º
9.5”
(241mm)
9.5”
(241mm)
4” (102 mm)
19” (483mm)
17.875” (454mm)
6.125” (156mm)
7.5” (191mm)
17” (432mm)
Stainless Steel Brackets
9.5”
(241mm)
7”
(197mm)
1.25” R
32mm
Hole Configuration
Front Side
Top
wall hanger
6” (152mm)
9.5” (241mm)
5.5” (140 mm)
18”
(457mm)
14”
(356mm)
2” (51mm)
.875” (22mm)
dia. key hole
1.5”
(38.1mm) .875”
(22.22mm)
Back
Splash
.25”
dia. hole
2” drain hole
Wall Mounting Detail
Specyfikacje produktu
| Marka: | Sani-Lav |
| Kategoria: | Spoelbak |
| Model: | ESB2-505L |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Sani-Lav ESB2-505L, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Spoelbak Sani-Lav
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
Instrukcje Spoelbak
- Spoelbak Teka
- Spoelbak Smeg
- Spoelbak Concept
- Spoelbak CDA
- Spoelbak Artusi
- Spoelbak Kernau
- Spoelbak Deante
- Spoelbak BLANCO
- Spoelbak Rangemaster
- Spoelbak Leisure
- Spoelbak Elkay
- Spoelbak Schock
- Spoelbak Advance Tabco
- Spoelbak Tot Mate
Najnowsze instrukcje dla Spoelbak
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
22 Września 2024