Instrukcja obsługi Samsung NK36CB700W12

Samsung Okap wyciągowy NK36CB700W12

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Samsung NK36CB700W12 (57 stron) w kategorii Okap wyciągowy. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/57
Range Hood
Installation manual
NK30CB700W** / NK36CB700W** / NK30CB600W** / NK36CB600W**
MANUAL INSTALL_Range Hood_DG68-01500A.indb 1
MANUAL INSTALL_Range Hood_DG68-01500A.indb 1
MANUAL INSTALL_Range Hood_DG68-01500A.indb 1
MANUAL INSTALL_Range Hood_DG68-01500A.indb 1MANUAL INSTALL_Range Hood_DG68-01500A.indb 1 2023-02-20 오후 10:25:53
2023-02-20 오후 10:25:53
2023-02-20 오후 10:25:53
2023-02-20 오후 10:25:532023-02-20 오후 10:25:53
2 English
Contents
Contents
Important Safety Instructions 2
Installation Requirements 4
General Specifications 4
Mounting Height 5
Venting Methods 5
Parts List 6
Sub-Parts List 6
Additional Purchase Accessories 6
Installation Clearances 7
Making a hole in the furniture 7
Installation 8
Setting the Location 8
Connecting the Vent System 9
Installing the Range Hood 10
Connect Filter Support Cable 13
Installing the Recirculation Kit 13
Important Safety Instructions
APPROVED FOR RESIDENTIAL APPLIANCES FOR RESIDENTIAL USE ONLY
READ AND SAVE THESE INSTRUCTIONS
PLEASE READ THE ENTIRE INSTALLATION GUIDE BEFORE PROCEEDING.
INSTALLATION MUST COMPLY WITH ALL LOCAL CODES.
IMPORTANT: Save these instructions for the use of the local electrical inspector.
INSTALLER: Please leave these Instructions with this unit for the owner.
OWNER: Please retain these instructions for future reference.
Symbols used in this manual
WARNING
Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result in electric shock, personal injury, or
property damage.
NOTE
Useful tips and instructions
These warning icons and symbols are here to prevent injury to you and others.
Please follow them explicitly. After reading this section, keep it in a safe place for
future reference.
WARNING
Turn off the power circuit in the service panel and lock out panel before wiring this
appliance.
Requirement 120 VAC, 60 Hz. 15 or 20 A Branch Circuit
State of California Proposition 65 warning (US only)
WARNING
This product contains chemicals known to the State of California to cause cancer
and birth defects or other reproductive harm.
MANUAL INSTALL_Range Hood_DG68-01500A.indb 2
MANUAL INSTALL_Range Hood_DG68-01500A.indb 2
MANUAL INSTALL_Range Hood_DG68-01500A.indb 2
MANUAL INSTALL_Range Hood_DG68-01500A.indb 2MANUAL INSTALL_Range Hood_DG68-01500A.indb 2 2023-02-20 오후 10:25:53
2023-02-20 오후 10:25:53
2023-02-20 오후 10:25:53
2023-02-20 오후 10:25:532023-02-20 오후 10:25:53
English 3
Important Safety Instructions
Electrical Requirements
IMPORTANT
Observe all governing codes and ordinances.
It is the customer’s responsibility:
To contact a qualified electrical installer.
To assure that the electrical installation is adequate and in conformance with the
National Electrical Code, ANSI/NFPA 70 — latest edition*, or CSA Standards C22.1-
94, Canadian Electrical Code, Part 1 and C22.2 No.0-M91 - latest edition** and all
local codes and ordinances.
If codes permit and a separate ground wire is used, it is recommended that a
qualified electrician determine that the ground path is adequate. A copy of the
above code standards can be obtained from:
National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169-7471
CSA International
8501 East Pleasant Valley Road
Cleveland, OH 44131-5575
A 120 volt, 60 Hz., AC only, 15-amp, fused electrical circuit is required.
If the house has aluminum wiring, follow the procedure below:
1. Connect a section of solid copper wire to the pigtail leads.
2. Connect the aluminum wiring to the added section of copper wire using
special connectors and/or tools designed and UL listed for joining copper to
aluminum.
Follow the electrical connector manufacturers recommended procedure.
Aluminum/copper connections must conform with local codes and industry
accepted wiring practices.
Wire sizes and connections must conform with the rating of the appliance as
specified on the model/serial rating plate. The model/serial plate is located behind
the filter on the rear wall of the range hood.
Wire sizes must conform to the requirements of the National Electrical Code, ANSI/
NFPA 70 (latest edition), or CSA Standards C22. 1-94, Canadian Electrical Code,
Part 1 and C22.2 No. 0-M91 (latest edition and all local codes and ordinances.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for the
electric current. This appliance is equipped with a cord that has a grounding wire
with a grounding plug. The plug must be plugged into an outlet that is properly
installed and grounded.
WARNING
Improper grounding can result in a risk of electric shock.
Consult a qualified electrician if the grounding instructions are not completely
understood, or if doubt exists as to whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord is too short, have a
qualified electrician install an outlet near the appliance.
Venting Requirements (ducted models only)
The vent system must terminate outdoors.
Do not terminate the vent system in an attic or other enclosed area.
Do not use a 4" (10.2 cm) laundry-type wall cap.
Only use metal vents. Rigid metal vents are recommended. Plastic or metal foil
vents are not recommended.
The length of the vent system and the number of elbows should be kept to a
minimum to provide efficient performance.
For the most efficient and quietest operation:
Use no more than three 90 ° elbows.
Make sure there is a minimum of 24" (61 cm) of straight vent between the elbows
if more than one elbow is used.
Do not install two elbows together.
Use clamps to seal all joints in the vent system.
The vent system must have a damper.
Use caulking to seal the exterior wall or roof opening around the cap.
The size of the vent should be uniform.
MANUAL INSTALL_Range Hood_DG68-01500A.indb 3
MANUAL INSTALL_Range Hood_DG68-01500A.indb 3
MANUAL INSTALL_Range Hood_DG68-01500A.indb 3
MANUAL INSTALL_Range Hood_DG68-01500A.indb 3MANUAL INSTALL_Range Hood_DG68-01500A.indb 3 2023-02-20 오후 10:25:53
2023-02-20 오후 10:25:53
2023-02-20 오후 10:25:53
2023-02-20 오후 10:25:532023-02-20 오후 10:25:53


Specyfikacje produktu

Marka: Samsung
Kategoria: Okap wyciągowy
Model: NK36CB700W12

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Samsung NK36CB700W12, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Okap wyciągowy Samsung

Instrukcje Okap wyciągowy

Najnowsze instrukcje dla Okap wyciągowy

Pelgrim

Pelgrim ISW990 Instrukcja

15 Października 2024
PKM

PKM 6080X Instrukcja

15 Października 2024
M-System

M-System MSPK 761 IX Instrukcja

15 Października 2024
Pelgrim

Pelgrim ISWA991RVS Instrukcja

15 Października 2024
Pelgrim

Pelgrim ISW751RVS Instrukcja

15 Października 2024
Pelgrim

Pelgrim ISW771RVS Instrukcja

15 Października 2024
Amana

Amana WVW53UC6HV Instrukcja

15 Października 2024
Haier

Haier HPH60IMB2 Instrukcja

15 Października 2024
Haier

Haier HC60BMB2 Instrukcja

15 Października 2024
Haier

Haier HPH90IMB2 Instrukcja

15 Października 2024