Instrukcja obsługi Samson MD2 Pro


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Samson MD2 Pro (32 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/32
Quick Start Guide
Copyright 2016, Samson Technologies Corp.
v3
Samson Technologies Corp.
45 Gilpin Avenue
Hauppauge, New York 11788-8816
Phone: 1-800-3-SAMSON (1-800-372-6766)
Fax: 631-784-2201
www.samsontech.com
If you want to dispose this product, do not mix it with general
household waste. There is a separate collection system for used
electronic products in accordance with legislation that requires
proper treatment, recovery and recycling.
Private household in the 28 member states of the EU, in Switzerland
and Norway may return their used electronic products free of charge to
designated collection facilities or to a retailer (if you purchase a similar
new one).
For Countries not mentioned above, please contact your local authorities
for a correct method of disposal.
By doing so you will ensure that your disposed product undergoes the
necessary treatment, recovery and recycling and thus prevent potential
negative effects on the environment and human health.
ENGLISHFRANÇAISDEUTSCHEESPAÑOLITALIANO
A direct insertion box, or DI box, converts unbalanced, high impedance,
signals to balanced, low impedance signals providing the facility for
connecting audio into a mixer’s microphone input. Samson’s S-Max
Direct Boxes combines premium sound circuitry with durable, roadwor-
thy construction to provide high-quality signal connection solutions for
live and studio applications. The Samson MD2 ProProfessional Stereo
Passive Direct Box offers a variety of DI solutions for live sound and
recording applications. You can connect all kinds of audio signals like
those from keyboards, drum machines, mixers, guitars, and outboard
signal processors.
Featuring two of Samson’s STLX Faraday shielded transformer, which
deliver an extended, flat frequency response, ultra-low distortion, and
eliminates hum and RF interference. The MD2 Pro balanced output
provide a clean signal, that is lesssusceptible to noise when compared
to an unbalanced cable, which allows for running longer lengths of
cables.Another benefit from a balanced connection is CMR (Common
Mode Rejection), which provides cancellation of interference (hums and
buzzes), while leaving the original signal pure.
The THRU jacks enables you to tap off the signal from the input and
pass the signal to an amplifier or monitor without affecting the original
sound. This can eliminate the need for miking the guitar amplifier,
which in many cases is preferable, especially as more bands are using
in-ear monitors. The Stereo/Mono switch mixes the two input channels
together for situations where the number of audio channels is at a
premium.
With proper care and maintenance, your MD2 Pro will operate trou-
ble-free for many years. Should your direct box ever require servicing,
a Return Authorization (RA) number must be obtained before shipping
your unit to Samson. Without this number, the unit will not be accepted.
Please call Samson at 1-800-3SAMSON (1-800-372-6766) for an RA
number prior to shipping your unit. If your direct box was purchased
outside of the United States, contact your local distributor for warranty
details and service information.
Introduction


Specyfikacje produktu

Marka: Samson
Kategoria: system hi-fi
Model: MD2 Pro

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Samson MD2 Pro, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje system hi-fi Samson

Samson

Samson SAXP208W Instrukcja

3 Października 2024
Samson

Samson S.phone Instrukcja

5 Września 2024
Samson

Samson C-control Instrukcja

31 Sierpnia 2024
Samson

Samson RS110A Instrukcja

28 Sierpnia 2024
Samson

Samson S.amp Instrukcja

24 Sierpnia 2024
Samson

Samson MD2 Pro Instrukcja

20 Sierpnia 2024
Samson

Samson MDA1 Instrukcja

19 Sierpnia 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi