Instrukcja obsługi Sabre Tattoo Machine
Sabre
Maszyna do tatuażu
Tattoo Machine
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sabre Tattoo Machine (16 stron) w kategorii Maszyna do tatuażu. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/16
Sabre User Guide
sabretattoosupplies.com
Operation
The Sabre tattoo m achine is designed to operate over
a variable voltage range depending on personal preference
and the t ype of work being created.
It can be connected to a power supply using an RCA or clip cord.
The tube clamp is operated by turning the vice in an anti-clockwise direction (1)
until the hole in the grip block aligns with the hole in the plastic body.
A tube is then fitted from the bottom and cla mped by turning the vice in a
clockwise direction.
If the vice is unscrewed too far the tube grip block can become disconnected. (4)
Care should be taken not to unscrew the vice too far as parts can become
disconnected.
If this happens, be careful not to lose any parts.
Gently align the screw thread with the tapped hole in the grip block and screw it back
in a clockwise direction.
The Sabre is fitted with a “one touch” hit adjuster , settings are altered by rotating (3)
the metal adjuster knob at the top of the unit. The full range of settings can be
achieved with less than one rotation. When the metal tab is covering the number 1,
the machine is set to its lightest hit. When number 11 is covered, the machine is set
to its hardest hit.
The needle retainer can be tightened and loosened using the adjuster knob.(2)
Screw the knob gently in a clockwise direction until the pulley is in contact
with the needle and keeps it in place on the rubber nipple. Do not over
tighten as this will put unwanted strain on the motor.
As with most tattoo machines the rubber nipple component
should be repl aced after each use.
This is a push fit onto the needle bar.
Specyfikacje produktu
Marka: | Sabre |
Kategoria: | Maszyna do tatuażu |
Model: | Tattoo Machine |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Sabre Tattoo Machine, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do tatuażu Sabre
1 Września 2024
Inne instrukcje Sabre
1 Września 2024
3 Lipca 2024