Instrukcja obsługi SAB SG711

SAB Zabawki sterowane radiem SG711

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla SAB SG711 (118 stron) w kategorii Zabawki sterowane radiem. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/118
SAB HELI DIVISION
G O B L I N B L A C K N I T R O
380mm
1320mm [SG651] 1385mm [SG711]
196mm
Main rotor diameter :
* 1468mm (with 650mm blades) [SG651]
* 1548mm (with 690mm blades) [SG711]
Main blade length :
* 650mm [SG651] * 690mm [SG711]
Tail rotor diameter :
* 285mm (with 105mm Tail blades) [SG651]
* 305mm (with 115mm Tail blades) [SG711]
Tail blade length :
* 105mm [SG651] * 115mm [SG711]
Weight including standard electronics:
* 4220g (Without Fuel) [SG651].
* 4300g (Without Fuel) [SG711].
Gear Ratio:
* 8.23 [SG651].
* 7.64 [SG711].
Usable Engines : YS91, YS96, YS120 - OS91, OS105.
Fuel capacity : 650cc.
SPECIFICATIONS
[ SG651 ( 650mm Size Blades ) SG711 ( 690mm Size Blades ) ]
It is extremely important that you take a moment to register your helicopter with us. This is the only way to ensure that you are
properly informed about changes to your kit, such as upgrades, retrofits and other important developments. SAB Heli Division
cannot be held responsible for issues arising with your model and will not provide support unless you register your serial number.
The Serial number is also engraved in the Aluminum Main Plate.
Thank you for your purchase, we hope you enjoy your new Goblin helicopter!
SAB Heli Division
VERY IMPORTANT
In the Manual bag you will find a product card your with serial number. Please take a moment to register
your kit online via our web site at:
Please read this user manual carefully, it contains instructions for the correct assembly of the model.
Please refer to the web site www.goblin-helicopter.com for updates and other important information.
http:
//www.goblin-helicopter.com
13 – Belt Tension and Canopy
14 – In flight
15 – Maintenance
16 – Exploded Views
17 – Spare Parts
INDEX
1 – Serial Number
2 – Important Notes
3 – Components and Box
4 – Carbon frame Assembly
5 – Tranmission Assembly
6 – Main Rotor Assembly
7 – Assembling The Modules
8 – Engine Unit Assembly
9 – Installation of Servos
10 – Installation of FBL Unit and RX
11 – Tank System Assembly
12 – Tail and Boom Assembly
Page 0
Chapter 1, Serial Number
IMPORTANT NOTES
*This radio controlled helicopter is not a toy.
*This radio controlled helicopter can be very dangerous.
*This radio controlled helicopter is a technically complex device which has to be built and handled very carefully.
*This radio controlled helicopter must be built following these instructions. This manual provides the necessary information
to correctly assemble the model. It is necessary to carefully follow all the instructions.
*Inexperienced pilots must be monitored by expert pilots.
*All operators must wear safety glasses and take appropriate safety precautions.
*A radio controlled helicopter must only be used in open spaces without obstacles, and far enough from people to minimize
the possibility of accidents or of injury to property or persons.
*A radio controlled helicopter can behave in an unexpected manner, causing loss of control of the model, making it very
dangerous.
*Lack of care with assembly or maintenance can result in an unreliable and dangerous model.
*
Neither SAB Heli Division nor its agents have any control over the assembly, maintenance and use of this product.
Therefore, no responsibility can be traced back to the manufacturer. You hereby agree to release SAB Heli Division from
any responsibility or liability arising from the use of this product.
SAFETY GUIDELINES
*Fly only in areas dedicated to the use of model helicopters.
*Follow all control procedures for the radio frequency system.
*It is necessary that you know your radio system well. Check all functions of the transmitter before every flight.
*The blades of the model rotate at a very high speed; be aware of the danger they pose and the damage they may cause.
*Never fly in the vicinity of other people.
*Follow all of the safety regulations relating to fuel management.
*Pay attention to the danger surrounding the cooling fan with running engine.
*Use caution when handling the muffler after a flight as they get very hot after a flight.
NOTES FOR ASSEMBLY
Please refer to this manual for assembly instructions for this model.
Follow the order of assembly indicated. The instructions are divided into chapters, which are structured in a way that
each step is based on the work done in the previous step. Changing the order of assembly may result in additional or
unnecessary steps.
Use thread lockers and retaining compounds as indicated. In general, each bolt or screw that engages with a metal part
requires thread lock.
It is necessary to pay attention to the symbols listed below:
Important
Use retaining
compound
(eg Loctite 648)
Use retaining
compound
(eg Loctite 243)
Use CA Glue
Use Proper
Lubricant
Indicates that for this
assembly phase you need
materials that are in bag xx.
Bag xx
Page 1
Chapter 2, Important Notes

Specyfikacje produktu

Marka: SAB
Kategoria: Zabawki sterowane radiem
Model: SG711

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z SAB SG711, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zabawki sterowane radiem SAB

SAB

SAB SG725 Instrukcja

20 Września 2024
SAB

SAB Goblin 380 Buddy Instrukcja

17 Września 2024
SAB

SAB SG508 Instrukcja

16 Września 2024
SAB

SAB SG707 Instrukcja

16 Września 2024
SAB

SAB SG571 Instrukcja

15 Września 2024
SAB

SAB mini COMET Instrukcja

13 Września 2024
SAB

SAB SG715 Instrukcja

13 Września 2024
SAB

SAB Goblin Kraken Instrukcja

12 Września 2024
SAB

SAB SG711 Instrukcja

12 Września 2024
SAB

SAB SG570 Instrukcja

10 Września 2024

Instrukcje Zabawki sterowane radiem

Najnowsze instrukcje dla Zabawki sterowane radiem

Futaba

Futaba SBS-01RO Instrukcja

15 Stycznia 2025
Spektrum

Spektrum DX5 Pro Instrukcja

29 Grudnia 2024
Sharper Image

Sharper Image Space Blaster Shooting Game Instrukcja

18 Grudnia 2024
Axial

Axial Wraith Spawn Instrukcja

15 Grudnia 2024
Spektrum

Spektrum AR6600T Instrukcja

15 Października 2024
Amewi

Amewi Hyper Go Instrukcja

9 Października 2024
Carson

Carson Drift Burner Instrukcja

9 Października 2024
Carson

Carson Micro X-Warrior 2.0 Instrukcja

9 Października 2024
Hobbywing

Hobbywing XeRun XR10 Pro WP Instrukcja

9 Października 2024
Hobbywing

Hobbywing XeRun XR10 Stock Spec G2 Instrukcja

9 Października 2024