Instrukcja obsługi RYOBI RMT2004

RYOBI wielofunkcyjne narzędzie RMT2004

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RYOBI RMT2004 (9 stron) w kategorii wielofunkcyjne narzędzie. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/9

RMT2004

ORIGINAL INSTRUCTIONS

Multi-tool

Important!

It is essential that you read the instructions in this manual before operating

this machine.

Subject to technical modiﬁ cations.

Safety

GENERAL POWER TOOL SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions. Failure

to follow the warnings and instructions may result in

electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool’’ in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)

power tool.

1. WORK AREA SAFETY

a. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

b. Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases, or dust. Power tools

create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

2. ELECTRICAL SAFETY

a. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adaptor plugs with earthed (grounded) power

tools. Unmodiﬁ ed plugs and matching outlets will

reduce risk of electric shock.

b. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

e. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

f. If operating power tools in a damp location is

unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

3. PERSONAL SAFETY

a. Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inﬂuence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

b. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

c. Prevent unintentional starting. Ensure the

switch is in the oﬀ-position before connecting

to power source and/or battery pack, picking up

or carrying the tool. Carrying power tools with your

ﬁ nger on the switch or energising power tools that

have the switch on invites accidents.

d. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

e. Do not overreach. Keep proper footing and

balance at all times. This enables better control of

the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

g. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

4. POWER TOOL USE AND CARE

a. Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the rate

for which it was designed.

b. Do not use the power tool if the switch does not

turn it on and oﬀ. Any power tool that cannot be

controlled with the switch is dangerous and must

be repaired.

c. Disconnect the plug from the power source and/

or the battery pack from the power tool before

making any adjustments, changing accessories,

or storing power tools. Such preventive safety

measures reduce the risk of starting the power tool

accidentally.

d. Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are dangerous

in the hands of untrained users.

e. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may aﬀect the

power tools operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f. Properly Keep cutting tools sharp and clean.

Specyfikacje produktu

Marka:	RYOBI
Kategoria:	wielofunkcyjne narzędzie
Model:	RMT2004
Kolor produktu:	Czarny, Srebrny
Typ wyświetlacza:	LED
Wysokość produktu:	39.8 mm
Szerokość produktu:	110.8 mm
Głębokość produktu:	15.4 mm
Waga produktu:	86 g
Wbudowane głośniki:	Tak
Technologia baterii:	Niklowo-metalowo-wodorkowa (NiMH)
Długość przekątnej ekranu:	1.69 "
Obsługiwane typy kart pamięci:	microSDHC
Pojemność pamięci wewnętrznej:	8192 MB
Obsługiwane formaty audio:	MP3,PCM,WMA
Wyjście na słuchawki:	Tak
Mikrofon:	Tak
Liczba baterii:	2
Standardowe rozwiązania komunikacyjne:	USB
Podświetlenie:	Tak
System operacyjny:	Windows XP, Windows Vista, Windows 7\nMac OS X 10.4.11 - 10.6
Ilość wbudowanych glosników:	1
Maksymalny czas nagrywania:	2007 h
Obsługiwane nośniki:	Karta pamięci
Kolor podświetlenia:	Niebieski
Radio FM:	Nie
Wbudowany mikrofon:	Tak
Funkcja wstrzymania:	Tak
Odtwarzacz mp3:	Tak
Rozmiar wyświetlacza:	31 x 29.7 mm
Tryb nagrywania:	Wysoka jakość (HQ)
Moc wyjściowa:	150 mW
Średnica głośników:	20 mm
Czas życia baterii przy nagrywaniu:	46 h
Liczba wiadomości w folderze:	200
Prędkość przepływu danych MP3:	64 - 320 Kbit/s
Prędkość przepływu danych WMA:	32 - 64 Kbit/s
Pasmo przenoszenia w trybie SHQ:	40 - 20000 Hz
Liczba folderów wiadomości:	5
Rozpoznawanie głosu:	Tak