Instrukcja obsługi RYOBI RCS5145N

RYOBI Maszyna do piłowania RCS5145N

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RYOBI RCS5145N (20 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

RCS5145N

PETROL CHAINSAW

Important!

It is essential that you read the instructions in this manual before

assembling, maintaining and operating this machine.

English (Original Instructions)

Thank you for buying a Ryobi chainsaw.

Your chainsaw has been engineered and manufactured to

Ryobi’s high standard for dependability, ease of operation,

and operator safety. Properly cared for, it will give you

years of rugged, trouble-free performance.

Some regions have regulations that restrict the use of

the product to some operations. Check with your local

authority for advice.

READ ALL INSTRUCTIONS

Intended use

This chainsaw is designed for cutting branches, trunks,

logs and beams of a diameter determined by the cutting

length of the guide bar. It is only designed to cut wood. It

is only to be used outdoors, by adults.

Do not use the chainsaw for any purpose not listed above.

This chainsaw is not to be used for professional tree

services. It is not to be used by children or by persons

not wearing adequate personal protective equipment and

clothing.

Residual risks

Even when using the chainsaw as intended, there remains

a residual risk of harm which cannot be fully prevented.

The following list of potential hazards should be read and

understood. You should pay extra attention and care to

these items to reduce the risk of occurrence or injury.

■Contact with exposed cutting teeth and saw chain.

■Access to rotating parts (the saw chain).

■Unexpected, abrupt movement (kick back) of the

guide bar.

■Flying chain parts (thrown off or broken).

■Flying material (cut from the work piece).

■Inhalation of saw dust and particles or emissions from

the petrol engine.

■Skin contact with petrol/oil.

■Loss of hearing if no hearing protective equipment

worn during use.

GENERAL SAFETY RULES

WARNING

The warnings, labels, and instructions found in this

section of the operator’s manual are for your safety.

Failure to follow all instructions may result in serious

personal injury. Safe operation of this tool requires that

you read and understand this operator’s manual and

all labels afxed to the tool. Safety is a combination of

using common sense, staying alert, and knowing how

your saw works.

■Do not operate a chainsaw that is damaged, improperly

adjusted, or not completely and securely assembled.

Be sure that the saw chain stops moving when the

throttle control trigger is released.

GENERAL PRECAUTIONS

■Know your tool. Read the operator’s manual carefully.

Learn the saw’s applications and limitations as well as

the specific potential hazards related to this tool.

■Do not operate a chainsaw with one hand. Serious

injury to the operator, helpers, and/or bystanders

may result from one-handed operation. A chainsaw is

intended for two-handed use.

■Do not operate a chainsaw when you are fatigued.

Never operate a chainsaw when you are tired or under

the influence of medication, drugs, or alcohol.

■Keep all parts of your body away from the saw chain

when the engine is running.

■Always carry the chainsaw with the engine stopped

and the brake engaged, the guide bar and saw chain

to the rear, and the silencer away from your body.

When transporting the chainsaw, use the appropriate

guide bar scabbard.

■Turn off the engine before putting the chainsaw down.

Do not leave the engine running unattended. As an

additional safety precaution, apply the chain brake

before putting down the saw.

■Do not cut vines and/or small undergrowth (less than

76 mm (3 inch) in diameter).

■Silencer surfaces are very hot during and after

operation of the chainsaw; keep all body parts away

from the silencer. Serious burns may occur if contact

is made with the silencer.

■Always hold the chainsaw with both hands when the

engine is running. Use a firm grip with thumbs and

fingers encircling the chainsaw handles.

■Never let anyone use your chainsaw who has not

received adequate instructions in its proper use. This

applies to rentals as well as privately owned saws.

■Before you start the engine, make sure the saw chain

is not contacting any object.

■Operate the chainsaw only in well ventilated areas.

■Always have a fire extinguisher available when using

chainsaw.

■Use guide bar cover during transport and storage.

■The chainsaw should always be used with correctly

mounted spiked bumper.

■Do not adapt your powerhead to a bow guide or use

it to power any attachments or devices not listed for

your saw.

English (Original Instructions)

PROPER CLOTHING FOR SAFETY

■Clothing must be sturdy and snug-fitting but allow

complete freedom of movement. Always wear long

pants made of heavy material to help protect your

legs from contact with branches and brush. To reduce

the risk of cut injuries,wear pants or chaps that

contain pads of cut retardant material. Never wear

scarves,ties,jewellery or other items of clothing,which

might get caught in the equipment, in brush or on

branches. Secure hair so it is above shoulder.

■Wear safety boots with a good tread (with non-slip

soles).

■Wear non-slip, heavy-duty protective gloves.

■Wear eye protection with side shields marked to

comply with EN 166 as well as hearing and head

protection when operating the product.

REFUELLING (DO NOT SMOKE!)

■To reduce the risk of fire and burn injury, handle fuel

with care. It is highly flammable.

■Mix and store fuel in a container approved for petrol.

■Mix fuel outdoors where there are no sparks or flames.

■Select bare ground, stop the engine, and allow it to

cool before refuelling.

■Loosen the fuel cap slowly to release pressure and to

keep fuel from escaping around the cap.

■Tighten the fuel cap securely after refuelling.

■Wipe spilled fuel from the unit. Move 9 m away from

refuelling site before starting engine.

■Never attempt to burn off spilled fuel under any

circumstances.

BASIC PRECAUTIONS IN THE CUTTING/WORK AREA

■Do not stand on any unstable surface while using your

chainsaw, that includes ladders, scaffolds, trees, etc.

■Do not start cutting until you have a clear work area,

secure footing, and a planned retreat path from the

falling tree.

■Do not cut from a ladder, this is extremely dangerous.

■Use extreme caution when cutting small-size brush

and saplings because slender material may catch the

saw chain and be whipped toward you or pull you off

balance.

■When cutting a limb under tension, be alert for spring-

back so that you will not be struck when the tension in

the wood fibres is released.

■Do not operate a chainsaw in a tree unless you have

been specifically trained to do so.

■Beware of the emission of exhaust gases, lubricant

mist and saw dust.

■This product is very noisy when operating, to prevent

long term hearing damage, wear hearing protection

and keep other persons 15 m away from the work

area. Operating similar tools nearby increases risk of

injury. Take frequent breaks.

■Use of hearing protection reduces the ability to hear

warnings (shouts or alarms). The operator must pay

extra attention to what is going on in the work area.

■Keep bystanders and animals out of the work area. Do

not allow other persons to be nearby during starting or

cutting with the chainsaw.

NOTE: The size of the work area depends on the job being

performed as well as the size of the tree or work piece

involved. For example, felling a tree requires a larger work

area than making other cuts, i.e., bucking cuts etc.

PUSH AND PULL

The reaction force is always opposite to the direction the

chain is moving. Thus, the operator must be ready to

control the pull when cutting on the bottom edge of the bar

and the push when cutting along the top edge.

NOTE: Your chainsaw has been fully factory tested. It is

normal to nd some slight lubricant residue on the saw.

MAINTENANCE PRECAUTIONS

■Never operate a chainsaw that is damaged, improperly

adjusted, or is not completely and securely assembled.

■Be sure that the saw chain stops moving when the

throttle control trigger is released. If the saw chain

moves at idling speed, the carburettor may need

adjusting. Refer to “Operation-adjusting idling speed”

later in this manual. If the saw chain still moves at

idling speed after adjustment has been made, contact

a service dealer for adjustment and discontinue use

until the repair is made.

■Keep the handles dry, clean, and free of lubricant or

fuel mixture.

■Follow the sharpening and maintenance instructions

for the saw chain.

■Use only the replacement guide bars and low kickback

chains specified for your saw. You must never modify

or remove parts from this product or use parts not

recommended by Ryobi. This will increase the risk of

injury.

WARNING

The risk of kickback may increase if non-approved

guide bar and chain combinations are used. Refer to

specications table for qualied replacement guide bar

and chain combinations.

Specyfikacje produktu

Marka:	RYOBI
Kategoria:	Maszyna do piłowania
Model:	RCS5145N

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z RYOBI RCS5145N, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do piłowania RYOBI

RYOBI R36XCHS10 Instrukcja

9 Października 2024

RYOBI RCS36HP Instrukcja

9 Października 2024

RYOBI One+ P2501 Instrukcja

8 Października 2024

RYOBI One+ P2508 Instrukcja

8 Października 2024

RYOBI RY40HPCW01 Instrukcja

8 Października 2024

RYOBI R18CHS20 Instrukcja

2 Października 2024

RYOBI OCS1830BL Instrukcja

26 Września 2024

RYOBI 18V One+ RCS18X Instrukcja

11 Września 2024

RYOBI RCS5145N Instrukcja

10 Września 2024

RYOBI One+ RJS18 Instrukcja

2 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Einhell BG-EC 2040 Instrukcja

28 Marca 2025

Einhell EKS-W 2040 Instrukcja

28 Marca 2025

Einhell TK 220/1 Instrukcja

28 Marca 2025

Makita UC023G Instrukcja

28 Marca 2025

Makita 4334DWFE Instrukcja

28 Marca 2025

Makita DPC7310 Instrukcja

28 Marca 2025

Einhell NKS 2000 Instrukcja

27 Marca 2025

Einhell NTK 1200 Instrukcja

27 Marca 2025

Einhell FKS 22/315 D Instrukcja

27 Marca 2025

Einhell NKT 1200 Instrukcja

27 Marca 2025