Instrukcja obsługi RYOBI RCS3845

RYOBI Maszyna do piłowania RCS3845

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RYOBI RCS3845 (44 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/44
ORIGINAL INSTRUCTIONS
Petrol Chainsaw
RCS3845
Important!
It is essential that you read the instructions in this manual before assembling,
operating, and maintaining the product.
Subject to technical modification.
1
Safety, performance, and dependability have been given
top priority in the design of your petrol chainsaw.
INTENDED USE
The petrol chainsaw is only intended for use outdoors in a
well-ventilated area. For safety reasons, the product must
be adequately controlled by using two-handed operation at
all times.
The product is designed for cutting branches, trunks, logs,
and beams of a diameter determined by the cutting length
of the guide bar. It is only designed to cut wood. It is only
to be used in domestic application by adults who have
received adequate training on the hazards and preventative
measures/actions to be taken while using the product.
The product is not to be used by children or by persons
not wearing adequate personal protective equipment and
clothing. It is also not to be used for professional tree
services.
Do not use the product for any other purpose.
WARNING
When using the product, the safety rules must be
followed. For your own safety and that of bystanders,
you must read and fully understand these instructions
before operating the product. You should attend
a professionally organised course on the use and
maintenance of chainsaws, preventative actions, and
rst aid. Please keep these instructions safe for later
use.
WARNING
Chainsaws are potentially dangerous tools. Accidents
involving the use of chainsaws often result in loss of
limbs or death. It is not just the product that is the hazard.
Falling branches, toppling trees, rolling logs can all kill.
Diseased or rotting timber poses additional hazards.
You should assess your capability of completing the task
safely. If there is any doubt, leave it to a professional
tree surgeon.
GENERAL SAFETY WARNINGS
■Some regions have regulations that restrict the use of
the product. Check with your local authority for advice.
■Never allow children or people unfamiliar with the
instructions to use the product. Local regulations may
restrict the age of the operator.
■Ensure before each use that all controls and safety
devices function correctly. Do not use the product if the
“off” switch does not stop the engine.
■Never start or run the engine in a closed or poorly
ventilated area, breathing exhaust fumes can kill.
■Clear the work area before each use, a cluttered and
untidy work area leads to accidents.
■Wear full eye and hearing protection, strong sturdy
gloves, safety boots with non-slip soles as well as head
protection while using the product. Use a face mask if
operation is dusty.
■Do not wear loose fitting clothing, short trousers or
jewellery of any kind.
■Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
■Beware of thrown, flying, or falling objects. Keep all
bystanders, children, and animals at least 15 m away
from work area.
■Never use the product in an explosive or flammable
atmosphere.
■Maintain a firm grip on both handles while using the
product.
■Stay alert, watch what you are doing, and use common
sense when using the product. Do not use the product
while tired, ill, or under the influence of drugs, alcohol,
or medication. A lapse in concentration while using the
product may result in severe personal injury.
■Do not use in poor lighting. The operator requires a
clear view of the work area to identify potential hazards.
■Use of hearing protection reduces the ability to hear
warnings (shouts or alarms). The operator must pay
extra attention to what is going on in the work area.
■Operating similar tools nearby increases both the risk
of hearing injury and the potential for other persons to
enter your work area.
■Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance or exposure
to hot surfaces and can increase the risk of kickback.
■Keep all parts of your body away from any moving part.
■Do not touch the area around the silencer or engine of
the product; these parts get very hot during operation.
■Inspect the product before each use. Check for correct
operation of all controls including the chain brake.
Check for loose fasteners, fuel leaks, etc. Make sure all
guards and handles are properly and securely attached.
Replace any damaged parts before use.
■Do not modify the product in any way or use parts
and accessories that are not recommended by the
manufacturer.
WARNING
If the product is dropped, suffers heavy impact, or begins
to vibrate abnormally, immediately stop the product and
inspect for damage or identify the cause of the vibration.
Any damage should be properly repaired or replaced by
an authorised service centre.
■When mixing fuel or filling fuel tank, do not smoke and
keep 10 m away from any source of ignition.
■Mix and store fuel only in a container approved for fuel.
■Mix fuel outdoors where there are no sparks or flames.
Wipe up any fuel spillage. Move 10 m away from
refuelling site before starting engine.
■Stop the engine and allow it to cool down before
refuelling, storing, or transporting the product.
■Remember to properly close all fuel tank/container caps
after refuelling or mixing.

Specyfikacje produktu

Marka: RYOBI
Kategoria: Maszyna do piłowania
Model: RCS3845

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z RYOBI RCS3845, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania RYOBI

RYOBI

RYOBI R36XCHS10 Instrukcja

9 Października 2024
RYOBI

RYOBI RCS36HP Instrukcja

9 Października 2024
RYOBI

RYOBI One+ P2501 Instrukcja

8 Października 2024
RYOBI

RYOBI One+ P2508 Instrukcja

8 Października 2024
RYOBI

RYOBI RY40HPCW01 Instrukcja

8 Października 2024
RYOBI

RYOBI R18CHS20 Instrukcja

2 Października 2024
RYOBI

RYOBI OCS1830BL Instrukcja

26 Września 2024
RYOBI

RYOBI 18V One+ RCS18X Instrukcja

11 Września 2024
RYOBI

RYOBI RCS5145N Instrukcja

10 Września 2024
RYOBI

RYOBI RPP3600 Instrukcja

20 Sierpnia 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Makita

Makita 5603 Instrukcja

15 Października 2024
MSW

MSW -TAS287 Instrukcja

15 Października 2024
MSW

MSW T-SAW300 Instrukcja

15 Października 2024
Black & Decker

Black & Decker KS650 Instrukcja

14 Października 2024
Black & Decker

Black & Decker GKC3630L20 Instrukcja

14 Października 2024
Ferm

Ferm FKS-165 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650.1ECO Instrukcja

14 Października 2024
Husqvarna

Husqvarna 365H Instrukcja

13 Października 2024
Makita

Makita DJV181Z Instrukcja

12 Października 2024