Instrukcja obsługi RYOBI R18HLTR38

RYOBI Nie skategoryzowane R18HLTR38

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RYOBI R18HLTR38 (20 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

R18HLTR38

Original Instructions

IMPORTANT!

It is essential that you read the instructions in this manual

before assembling, operating, and maintaining the

product.

Subject to technical modication.

Safety, performance, and dependability have been given top

priority in the design of your cordless line trimmer.

INTENDED USE

The cordless line trimmer is intended to be used only by

adults who have read and understood the instructions and

warnings in this manual and can be considered responsible

for their actions.

The product is intended only for outdoor use in a well-

ventilated area. For safety reasons, the product must be

adequately controlled by a two-handed operation.

When tted with the line string head (and appropriate

guard), the product is intended for cutting long grass, pulpy

weed, and similar vegetation at or about ground level. The

cutting plane should be approximately parallel to the ground

surface.

The product should not be used to cut or trim hedges,

bushes, or other vegetation where the cutting plane is not

parallel to the ground surface.

Do not use the product for any other purpose.

GENERAL SAFETY WARNINGS

WARNING! Read all safety warnings and all

instructions. Failure to follow the warnings and instructions

may result in electric shock, re, and/or serious injury.

■When using the product, the safety rules must be

followed. For your own safety and that of bystanders,

please read these instructions before operating the

product. Please keep the instructions safe for later use.

■The product is not intended to be used by children or

persons with reduced physical, mental, or sensory

capabilities. Children should be adequately supervised

to ensure that they do not play with the product.

■Some regions have regulations that restrict the use of

the product. Check with your local authority for advice.

TRAINING

■Read the instructions carefully. Be familiar with all

controls and the proper use of the product.

■Never allow children or people who are unfamiliar with

these instructions to use the product. Local regulations

may restrict the age of the operator.

■Keep bystanders, children, and pets 15 m away from the

area of operation. Turn off the product if anyone enters

the area.

■Never use the product while tired, ill, or under the

influence of alcohol, drugs, or medication.

■Keep in mind that the operator or user is responsible for

accidents or hazards occurring to other people or their

property.

PREPARATION

■Wear full eye and hearing protection while operating the

product. If working in an area where there is a risk of

falling objects, head protection must be worn.

■Hearing protection may restrict the operator’s ability

to hear warning sounds. Pay particular attention to

potential hazards around and inside the working area.

■Wear heavy, long trousers, boots, and gloves. Do not

wear loose-fitting clothing, short trousers, or jewellery of

any kind, and do not use the product with bare feet.

■Secure long hair so that it is above shoulder level to

prevent entanglement in moving parts.

■Before use and after any impact, check that there are no

damaged parts on the product. A defective switch or any

part that is damaged or worn should be properly repaired

or replaced by an authorised service centre.

■Make sure that the cutting attachment is properly

installed and securely fastened.

■Never operate the product unless all guards, deflectors,

and handles are properly and securely attached.

■Consider the environment in which you are working.

Keep the working area free from wires, sticks, stones,

and debris, which if struck by the cutter can become

thrown objects.

BATTERY TOOL USE AND CARE

■Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of fire when used with

another battery pack.

■Use power tools only with specifically designated battery

packs. Use of any other battery packs may create a risk

of injury and fire.

■When the battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys, nails,

screws, or other small metal objects that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

■Under abusive conditions, liquid may be ejected from

the battery. Avoid contact. If contact accidentally occurs,

flush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause

irritation or burns.

CORDLESS LINE TRIMMER SAFETY WARNINGS

■Never allow children, persons with reduced physical,

sensory, or mental capabilities or lack of experience

and knowledge, or people who are unfamiliar with the

instructions to use the product.

■Use the product in daylight or with good artificial light.

■Avoid using the product on wet grass.

■Keep firm footing and balance at all times, and be sure

of proper footing on slopes.

■Do not walk backwards when using the product. Walk,

never run.

■Keep the head attachment below waist level.

■Never use the product with damaged guards or without

guards in place.

■Never fit a metal replacement line.

■Keep hands and feet away from the cutting means at all

times, especially when turning on the motor.

■Beware, the cutting elements continue to rotate after the

motor is turned off.

Original Instructions

■Beware of objects thrown by the cutting means. Clear

debris like small stones, gravel, and other foreign objects

from the work area before starting the operation. Wires

or string may become entangled with the cutting means.

■To reduce the risk of injury associated with contacting

moving parts, always turn off the product, remove the

battery pack, and allow both to cool down. Make sure

that all moving parts have come to a complete stop:

●before servicing

●before clearing a blockage

●before checking, cleaning, and working on the

product

●before changing accessories

●after striking a foreign object

●whenever leaving the product unattended

●whenever performing maintenance

●whenever the product starts to vibrate abnormally

■Wear full eye and hearing protection while operating the

product. If working in an area where there is a risk of

falling objects, head protection must be worn.

■Hearing protection may restrict the operator’s ability

to hear warning sounds. Pay particular attention to

potential hazards around and inside the working area.

■Wear heavy, long trousers, boots, and gloves. Do not

wear loose-fitting clothing, short trousers, or jewellery of

any kind, and do not use the product with bare feet.

■Secure long hair so that it is above shoulder level to

prevent entanglement in moving parts.

■The small blade fitted to the lawn guard is designed to

trim the new extended line to the correct length for safe

and optimum performance. The blade is very sharp.

Do not touch the blade, particularly when cleaning the

product.

■Always ensure that ventilation openings are kept clear

of debris.

■Before use and after any impact, check that there are

no damaged parts on the product. A defective switch or

any part that is damaged should be properly repaired or

replaced by an authorised service centre.

■Make sure that the cutting head attachment is properly

installed and securely fastened.

■Make sure that all the guards, deflectors, and handles

are properly and securely attached.

■Do not modify the product in any way. This may increase

the risk of injury to yourself or others.

■Use only the manufacturer’s replacement cutting line.

Do not use any other cutting attachment.

■Immediately turn off the product and remove the battery

pack in the event of accident or breakdown. Do not

operate the product again until it has been fully checked

by an authorised service centre.

■Ensure that the line cut-off blade in the guard is properly

positioned and secured before each use.

ADDITIONAL BATTERY SAFETY WARNINGS

To reduce the risk of re, personal injury, and product

damage due to a short circuit, never immerse the tool,

battery pack, or charger in uid or allow uid to ow inside

them. Corrosive or conductive uids, such as seawater,

certain industrial chemicals, and bleach or bleach-containing

products, etc., can cause a short circuit.

TRANSPORTATION AND STORAGE

■Turn off the product, remove the battery pack, and allow

both to cool down before storing or transporting.

■Remove all foreign materials from the product.

■Do not store or transport the product with the battery

pack fitted. Remove the battery pack, and secure it

separately. Store the product in a cool, dry, and well-

ventilated place that is inaccessible to children. Keep

the product away from corrosive agents, such as garden

chemicals and de-icing salts. Do not store the product

outdoors.

■For transportation in vehicles, secure the product

against movement or falling to prevent injury to persons

or damage to the product.

TRANSPORTING LITHIUM BATTERIES

■Transport the battery pack in accordance with local and

national provisions and regulations.

■Follow all special requirements on packaging and

labelling when transporting batteries by a third party.

Ensure that no batteries can come in contact with other

batteries or conductive materials while in transport

by protecting exposed connectors with insulating,

nonconductive caps or tape. Do not transport batteries

that are cracked or leaking. Check with the forwarding

company for further advice.

MAINTENANCE

■Use only original manufacturer’s replacement parts,

accessories, and attachments. Failure to do so can cause

possible injury, can contribute to poor performance, and

may void your warranty.

■Servicing requires extreme care and knowledge

and should be performed only by a qualified service

technician. Have the product serviced by an authorised

service centre only. When servicing, use only original

replacement parts.

■Turn off the product and remove the battery pack before

conducting any maintenance or cleaning work.

■You may make adjustments or repairs described in this

manual. For other repairs, contact an authorised service

centre.

■For the replacement line, use only a nylon filament line

of the diameter described in the specifications table of

this manual.

■After each use, clean the product with a soft, dry cloth.

Any part that is damaged should be properly repaired or

replaced by an authorised service centre.

■Check all nuts, bolts, and screws before each use and

at frequent intervals for proper tightness to ensure that

the product is in safe working condition. Any part that is

damaged should be properly repaired or replaced by an

authorised service centre.

■Bring the product to an authorised service centre to

replace damaged or unreadable labels.

■Injuries may be caused, or aggravated, by prolonged

use of a tool. When using any tool for prolonged periods,

ensure that you take regular breaks.

Specyfikacje produktu

Marka:	RYOBI
Kategoria:	Nie skategoryzowane
Model:	R18HLTR38

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z RYOBI R18HLTR38, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Nie skategoryzowane RYOBI

RYOBI One+ RPP182020C Instrukcja

15 Marca 2025

RYOBI R18HLTR38 Instrukcja

7 Lutego 2025

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane

Planet PWR-240-48 Instrukcja

9 Kwietnia 2025

CaterChef 445001 Instrukcja

9 Kwietnia 2025

Daikin EKWCTRDI1V3 Instrukcja

9 Kwietnia 2025

Simplified MFG SP18CAT120 Instrukcja

9 Kwietnia 2025

AudioQuest Pegasus Instrukcja

9 Kwietnia 2025

Reolink P330 Instrukcja

9 Kwietnia 2025

Reolink NVS16-8MB8 Instrukcja

9 Kwietnia 2025

Drive Medical RTL12045 Instrukcja

9 Kwietnia 2025

Kern MBC-A05 Instrukcja

9 Kwietnia 2025

Daikin EKEXVA250 Instrukcja

9 Kwietnia 2025