Instrukcja obsługi RYOBI One+ R18ID2

RYOBI Maszyna do śrub One+ R18ID2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RYOBI One+ R18ID2 (12 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
ORIGINAL INSTRUCTIONS
18V Impact Driver
R18ID2
Important!
It is essential that you read the instructions in this manual before assembling,
operating, and maintaining the product.
Subject to technical modification.
1
Safety, performance, and dependability have been given
top priority in the design of your impact driver.
INTENDED USE
The impact driver is intended to be used only by adults who
have read and understood the instructions and warnings in
this manual, and can be considered responsible for their
actions.
The product is intended for fastening and removing screws
and bolts.
The product is intended for consumer use only.
Do not use the product for any other purpose. Use of the
product for operations different from intended could result
in a hazardous situation.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool’’ in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
WORK AREA SAFETY
■Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
■Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
■Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
■Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
■Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
■Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
■Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
■When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
■If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
PERSONAL SAFETY
■Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
■Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce
personal injuries.
■Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
■Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
■Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
■Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts. Loose clothes, jewellery or long hair can
be caught in moving parts.
■If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
■Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
POWER TOOL USE AND CARE
■Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
■Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
■Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting
the power tool accidentally.
■Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
■Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the

Specyfikacje produktu

Marka: RYOBI
Kategoria: Maszyna do śrub
Model: One+ R18ID2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z RYOBI One+ R18ID2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do śrub RYOBI

RYOBI

RYOBI One+ R18IW3 Instrukcja

11 Stycznia 2025
RYOBI

RYOBI PCL250 Instrukcja

4 Stycznia 2025
RYOBI

RYOBI PCL212 Instrukcja

4 Stycznia 2025
RYOBI

RYOBI One+ RSD18 Instrukcja

3 Stycznia 2025
RYOBI

RYOBI One+ PSBID02 Instrukcja

8 Października 2024
RYOBI

RYOBI One+ PSBID01 Instrukcja

8 Października 2024
RYOBI

RYOBI One+ PBLID01 Instrukcja

8 Października 2024
RYOBI

RYOBI One+ PBLID02 Instrukcja

8 Października 2024
RYOBI

RYOBI P262 Instrukcja

8 Października 2024
RYOBI

RYOBI One+ RID1801M Instrukcja

4 Września 2024

Instrukcje Maszyna do śrub

Najnowsze instrukcje dla Maszyna do śrub

Fuxtec

Fuxtec FX-E1IW20 Instrukcja

13 Stycznia 2025
Hazet

Hazet 9012EL-SPC Instrukcja

12 Stycznia 2025
MSW

MSW -ACW700 Instrukcja

10 Stycznia 2025
Hazet

Hazet 9212SPC-010 Instrukcja

1 Stycznia 2025
Hazet

Hazet 6004CT-3 Instrukcja

1 Stycznia 2025
Hazet

Hazet 6001-1.5/3 Instrukcja

1 Stycznia 2025
Hazet

Hazet 6001-3.0/3 Instrukcja

1 Stycznia 2025
Hazet

Hazet 9012MT Instrukcja

30 Grudnia 2025
Hazet

Hazet 9021-3 Instrukcja

30 Grudnia 2025
Hazet

Hazet 9022 P-2 Instrukcja

30 Grudnia 2025