Instrukcja obsługi RYOBI One+ PSBID02
RYOBI
Maszyna do śrub
One+ PSBID02
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RYOBI One+ PSBID02 (24 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/24
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
ONE+ 18V COMPACT BRUSHLESS
IMPACT DRIVER
CLÉ À CHOCS SANS BALAI COMPACT ONE+ DE 18 V
DESTORNILLADOR DE IMPACTO COMPACTA Y SIN
ESCOBILLAS DE 18 V ONE+
PSBID02
General Power Tool
Safety Warnings ............................. 2-3
Impact Driver Safety Warnings 4 ...........
Symbols ..............................................5
Features ..............................................5
Assembly ............................................6
Operation ........................................ 6-7
Maintenance .......................................8
Troubleshooting ..................................8
Illustrations .........................................9
Parts Ordering and
Service ................................Back page
Avertissements de sécurité générales
relatives aux outils électriques 2-3 .......
Avertissements de sécurité relatifs
au clé à chocs ....................................4
Symboles ............................................5
Caractéristiques .................................5
Assemblage ........................................6
Utilisation ....................................... 6-7
Entretien .............................................8
Dépannage .........................................8
Illustrations .........................................9
Commande de pièces et
dépannage ........................Page arrière
Advertencias de seguridad
para herramientas eléctrica ........... 2-3
Advertencias de seguridad
destornillador de impacto 4 .................
Símbolos ........................................... 5
Características .................................. 5
Armado ............................................. 6
Funcionamiento ............................. 6-8
Mantenimiento .................................. 8
Corrección de problemas 8 .................
Illustraciones ..................................... 9
Pedidos de piezas y
servicio .........................Pág. posterior
WARNING:
To reduce the risk of injury, the user
must read and understand the opera-
tor’s manual before using this product.
AVERTISSEMENT :
Pour réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation
avant d’utiliser ce produit.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el
usuario debe leer y comprender el
manual del operador antes de usar este
producto.
TABLE OF CONTENTS TABLE DES MATIÈRES ÍNDICE DE CONTENIDO
SAVE THIS MANUAL
FORFUTUREREFERENCE
GUARDE ESTE MANUAL
PARAFUTURASCONSULTAS
CONSERVER CE MANUEL
POURFUTURERÉFÉRENCE
2 - English
WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the risk
of electric shock.
Use battery only with charger listed. For use with 18V
lithium-ion battery packs, see tool/appliance/battery
pack/charger correlation supplement 987000-432.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as a dust mask,
non-skid safety shoes, hard hat, or hearing protection used
for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewelry.
Keep your hair and clothing away from moving parts.
Loose clothes, jewelry or long hair can be caught in moving
parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe
injury within a fraction of a second.
Do not wear loose clothing or jewelry. Contain long hair.
Loose clothes, jewelry, or long hair can be drawn into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from the
power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
GENERAL POWER TOOL SAFETY WARNINGS
3 - English
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws, or other small metal objects, that can make
a connection from one terminal to another. Shorting
the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion, or risk
of injury.
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 265°F may cause explosion.
Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage
the battery and increase the risk of fire.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service provider.
GENERAL POWER TOOL SAFETY WARNINGS
Specyfikacje produktu
| Marka: | RYOBI |
| Kategoria: | Maszyna do śrub |
| Model: | One+ PSBID02 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z RYOBI One+ PSBID02, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do śrub RYOBI
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Sierpnia 2024
6 Sierpnia 2024
6 Lipca 2024
5 Lipca 2024
5 Lipca 2024
Instrukcje Maszyna do śrub
- Maszyna do śrub AEG
- Maszyna do śrub Worx
- Maszyna do śrub Kawasaki
- Maszyna do śrub Milwaukee
- Maszyna do śrub Bosch
- Maszyna do śrub Yato
- Maszyna do śrub Parkside
- Maszyna do śrub Toolcraft
- Maszyna do śrub Festool
- Maszyna do śrub Panasonic
- Maszyna do śrub StarTech.com
- Maszyna do śrub Bavaria By Einhell
- Maszyna do śrub SW-Stahl
- Maszyna do śrub Stanley
- Maszyna do śrub Black & Decker
- Maszyna do śrub Hazet
- Maszyna do śrub DeWalt
- Maszyna do śrub Einhell
- Maszyna do śrub Silverline
- Maszyna do śrub Makita
- Maszyna do śrub Ozito
- Maszyna do śrub Chicago Pneumatic
- Maszyna do śrub GO/ON
- Maszyna do śrub DEDRA
- Maszyna do śrub Hilti
- Maszyna do śrub Rodcraft
- Maszyna do śrub BaseTech
- Maszyna do śrub Dremel
- Maszyna do śrub Meec Tools
- Maszyna do śrub Güde
- Maszyna do śrub Bavaria
- Maszyna do śrub Carrera
- Maszyna do śrub Beta
- Maszyna do śrub Fein
- Maszyna do śrub Hitachi
- Maszyna do śrub Craftsman
- Maszyna do śrub Matrix
- Maszyna do śrub Fieldmann
- Maszyna do śrub PowerPlus
- Maszyna do śrub Alpha Tools
- Maszyna do śrub Vonroc
- Maszyna do śrub HiKOKI
- Maszyna do śrub Wiha
- Maszyna do śrub Porter-Cable
- Maszyna do śrub Metabo
- Maszyna do śrub Skil
- Maszyna do śrub Tacklife
- Maszyna do śrub Senco
- Maszyna do śrub Maktec
- Maszyna do śrub Steren
- Maszyna do śrub Power Craft
- Maszyna do śrub Kraftwerk
- Maszyna do śrub Kress
- Maszyna do śrub Urrea
- Maszyna do śrub Truper
- Maszyna do śrub Bruder Mannesmann
- Maszyna do śrub Meister Craft
- Maszyna do śrub Batavia
- Maszyna do śrub Elu
- Maszyna do śrub Sthor
- Maszyna do śrub Cleco
- Maszyna do śrub Einhell Bavaria
- Maszyna do śrub Wera
- Maszyna do śrub Ingersoll Rand
- Maszyna do śrub Facom
- Maszyna do śrub TAURUS Titanium
Najnowsze instrukcje dla Maszyna do śrub
12 Października 2024
10 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024